1. Overview of reverse osmosis equipment for glass production. In glass production, the quality of water directly affects the finished glass. The reverse osmosis equipment for glass production uses dual-stage reverse osmosis membrane separation technology to effectively remove co

2024/05/1110:07:33 news 1450

1. Overview of reverse osmosis equipment for glass production

In glass production, the quality of water directly affects the finished glass, and reverse osmosis equipment for glass production uses two-stage reverse osmosis membrane separation technology to effectively remove colloids in raw water. , microorganisms and other impurities, the effluent water quality meets the water needs of the glass production industry. The reverse osmosis equipment used in glass production uses membrane elements from well-known foreign companies to ensure the quality of the water effluent from the equipment.

1. Overview of reverse osmosis equipment for glass production. In glass production, the quality of water directly affects the finished glass. The reverse osmosis equipment for glass production uses dual-stage reverse osmosis membrane separation technology to effectively remove co - DayDayNews

2. Characteristics of reverse osmosis equipment for glass production

1. Large water permeability, high desalination rate . Under normal circumstances, it is not less than 98%.

2. It has a high removal effect on organic matter, colloids, particles, bacteria, viruses, heat sources, etc.

3, low energy consumption, high water utilization, and lower operating costs than other similar desalination equipment.

4. There is no phase change in the separation process and it is reliable and stable.

5. The equipment is small in size, simple to operate, easy to maintain, has strong adaptability and has a long service life.

1. Overview of reverse osmosis equipment for glass production. In glass production, the quality of water directly affects the finished glass. The reverse osmosis equipment for glass production uses dual-stage reverse osmosis membrane separation technology to effectively remove co - DayDayNews

3. Installation conditions of reverse osmosis equipment for glass production

1. After the device is transported to the site, it should be placed indoors, and the surrounding temperature should not be lower than 5℃ and not higher than 38℃. When the temperature is higher than 35℃, ventilation measures should be strengthened.

2. After the device arrives, the installation should be completed within one month, and the water test run should be carried out immediately.

3. Before the device is tested with water, no valves should be opened to avoid causing the solution to flow out and damage the components.

4. After the device is in place, the support points of the device must be adjusted so that the component is in a basically horizontal position and must be in reliable contact with the foundation.

5. The pipelines and valves connecting the device to the water supply pump should be degreased before connection, and the overflow part of the water supply pump should also be degreased.

1. Overview of reverse osmosis equipment for glass production. In glass production, the quality of water directly affects the finished glass. The reverse osmosis equipment for glass production uses dual-stage reverse osmosis membrane separation technology to effectively remove co - DayDayNews

6. The maximum output height of the produced water output pipe of the device should be less than 8 meters.

Note: Points 2 and 3 are only for devices with membrane elements installed in RO devices.

news Category Latest News