Badminton racket stringing is a common and unavoidable problem in badminton, and most golfers don't know how to deal with this problem. Today I will analyze the causes of badminton racket stringing and how to deal with it.
Objective reasons:
1. The poundage is too low or the stringing poundage does not match the batting power. In this case, you can consider increasing the poundage appropriately the next time you string the string, because the higher the poundage, the greater the difference between the horizontal line and the vertical line. The tighter the threads will be;
2. If most of the strings are vertical, especially if the middle ones are serious, you can check whether the threading process of the first few vertical lines is in compliance with the specifications. Under normal circumstances, the vertical lines are vertical. The threads should also be tightened one by one like the horizontal threads. However, some stringers often choose to tighten every other strip in order to be in a hurry. Therefore, it is difficult to guarantee the poundage of this part of the vertical thread. At this time, you need to carefully choose a technique. Pass the test and be a responsible stringer at the same time.
3. Check whether the badminton string you choose is too thin or the surface is too smooth. Because of the special composition of the badminton string, the string itself will be hard and smooth. At this time, the contact area between the horizontal line and the vertical line is small, and the relationship between the lines is small. The friction between the threads is also relatively small, and it is easy to move under the action of external force. At the same time, thinner and slippery threads are also prone to weight loss.
Subjective reasons:
1. For experts, when the powerful slashing technique is used a lot, it is easy to cause line alignment. For example, some professional players often wear high pounds close to 30 pounds, and they will make excuses from time to time during the game. The movement of the string, so if you do a lot of vigorous slashing, your sensitivity to the string bed will be slightly reduced.
2. A common situation for beginners:
① The grip of the racket is incorrect, and the thumb and index finger are not able to feel the forehand surface. The typical performance is that when the forehand is exerting force, the two fingers are not on both sides of the racket handle. The two wide surfaces are "face to face", but the thumb runs to the oblique edge or inclined surface (use a backhand grip to hit a forehand ball), and the index finger lies entirely on the wide surface or is extended too straight, weakening the grip of the racket handle. Control strength, etc.
② The footwork is messy. Taking the right-handed racket as an example, there is no active footwork adjustment before hitting the ball. As a result, the ball does not fall from above the left shoulder, but moves forward, backward, left and right. In addition, the body often does not turn straight. The stability of the shooting is simply difficult to guarantee.
3. Some golfers who are in the process of improvement begin to consciously compete with golfers who are at a similar level to themselves, or often challenge golfers with a higher level. At this time, they will often be forced into a passive situation by the opponent, and they will be forced frequently. Changing the forehand and backhand grip or handling the passive ball behind the body, etc., will cause the phenomenon of cutting shots with strong force but the racket surface is not turned straight. At this time, the reaction force of the ball head will move the racket string to the side and move out of position. , is also inevitable.
To sum up, if you want your racket to be smooth, you need to find a suitable racket string to match, and a comfortable feel requires a suitable poundage to ensure it.
suggestion: Because the diameter of the badminton string is thin, the racket stringing may be unavoidable in badminton. Therefore, what golfers can do is to comprehensively analyze it from both objective and subjective aspects, combined with their own playing habits, and find out Where the problem lies, minimize the extent of racket string routing and reduce racket damage.
