P9200CC
Details are improved, somatosensory optimization
I believe that many golfers will immediately think of "CC? Is this the new P9200 sneaker?" when they hear about P9200CC. Is this the joy and surprise of Xiaodai's P9200 boots? Fortunately, Xiao Huang and I did enough homework at this year's new product launch conference and knew in advance that the P9200CC would be released separately as Xiaodai boots.
Part.1 Appearance
In appearance, P9200CC inherits the design language of P9200II. Except for minor changes in some details, it adopts black and white as the main color. The orange-red embellished P9200CC looks like a mature and stable dark with ignorant green onions, which is a sharp contrast.
Xiaodai’s main color elements also penetrate into the details of the LOGO.
Part.2 Detailed parameters
Since it is based on the design language change of P9200II, Xiao Huang, who has experienced P9200II earlier, naturally took out the P9200II in his hand for comparison. Taking the same length of a single size 41 265mm as an example, the weight of a single left foot of P9200II is 343.5g.
The weight of the single right foot of P9200CC is 345.5g, which is a weight gain of 2g. It may barely reach the lightweight category of less than 350g, but in fact, for the P series sneakers that focus on protection, they have an anti-rollover structure and an anti-torsion frame. There is indeed a balance between protection and speed, and each has its own trade-offs.
Part.3 Detailed changes
, tongue sponge wrapping, comparison should be due to the fact that P9200CC has a thicker tongue sponge amount, plus the additional tongue fixing strap design.
2 and P9200II are specially designed in wall gray with a reinforcement design added to the forefoot to prevent drag wear. After consumer feedback that it was "slightly obtrusive", the P9200CC also made changes immediately. The reinforcement part of the V-Tough anti-drag wear technology in the forefoot is based on the opinions of golfers, and the same black color as the upper is used to make it no longer obtrusive.
3, the breathable grille was changed to breathable holes/sandwich mesh;
The breathable grille on the inner and outer layers of the shoe body has been changed. Although I personally think it is not as technological, fashionable and dynamic as the previous one, such changes are undoubtedly Is it to increase the ductility of the upper and the strength of the shoe body, it is still very acceptable.
Part.4 On-foot wear/actual experience
Wrapping and bending
is different from P9200II. When I first opened the box, I thought that the main reason for changing the breathable grille to perforated ventilation was to enhance the ductility and durability of the upper.
However, during the activities of wearing it on the upper foot, it can be observed with the naked eye that the P9200CC, which uses a microfiber PU leather upper material, not only bends more smoothly than the P9200II during the bending process of the forefoot, The overall flexibility of the shoe body has also been greatly improved. After the modification of the breathable window on the back of the toe, the friction between the prominent edges and stitching lines has also disappeared.
In addition, the amount of sponge on the tongue is increased, and the wearing experience after putting it on the foot gives me a substantial improvement in the sense of wrapping and comfort compared to P9200II.
shoe last width P9200CC uses the same 2.5 standard width 3E V-shaped shoe last as P9200II. The shoe compartment space is compact and reasonable, and the increased amount of sponge at the tongue also makes the fit more comfortable. Xiao Huang, I wear Roman feet. After using it, it feels better than the A960 and P9500, which are both 2.5V lasts. Golfers with higher insteps may need to loosen the shoelaces appropriately.
The sponge wrap on the heel is also quite comfortable.
Forefoot startup
focuses on comprehensive stability. The performance feedback of P9200CC at the moment of startup is naturally the same as that of P9200II, and there is no obvious difference in startup speed from the previous generation.The overall center of gravity of the
sneakers is higher than that of the P9500, and the start-up is relatively slower than the S-series sneakers that focus on speed. However, the P9200II with the wave anti-slip insole still has excellent start-up feedback. The start-up is solid and powerful without being sloppy. If you like hard and straight court feedback If you are interested in speed, you can also try the speed shoes in the S series of VICTOR sneakers.
heel cushioning
and P9200II are also equipped with E-TPU, which is made of polyurethane granular material foaming. The closed granules have excellent resilience and deformation recovery ability after foaming. They are not easy to deform after long-term wear, and their performance is significantly better than traditional EVA materials. , giving the wearer comfortable cushioning and superior elasticity.
The moment of cushioning when falling is different from the loose feeling of P9310 when stepping on the soft snow surface, but more like the squeeze and rebound of sandwich "snowy rice cake". The upper limit of elasticity is also better restrained by the deformation of the semi-cup-shaped heel, so that it will not bounce randomly.
The heel is embedded and surrounded by a cup, which firmly locks the ankle when worn, without affecting the overall center of gravity of the sneakers at all.
Anti-torsion and anti-rollover
Compared with the previous generation, both P9200II and P9200CC have increased lateral stability and upgraded to a large-area LS-SHELL, with a supportive TPU fused midsole outer layer and a carbon fiber connecting piece, which naturally enhances landing stability. Spend. The lateral stability of
is comparable to that of the previous generation.
About the insoles
Regarding the review of VICTOR sneakers, there really is no need to say more. The unbeatable Energy max 3.0 insoles are very conscientious. If you feel that the support and shock absorption are not enough, you can DIY a pair of VICTOR’s flagship shoe soles XD-10. It is also suitable for golfers with flat feet. If you still need stronger arch support, it is recommended to buy the recently launched built-in midsole sneakers VG-1 (with a stable transverse arch support structure).
retains the shoelace storage strap and adds a tongue fixing strap.
P9200CC naturally retains this small black strap for easy storage of shoelaces. It was mentioned in the previous unboxing. Then during the actual combat, even if the shoelaces were loosened There is no scattering, and it can effectively reduce the hidden danger of shoelaces being dragged, and the safety is also improved. It is useful and considerate!
The only flaw may be that the P9200CC barely reaches the lightweight category of less than 350g. Compared with the P9200II, it is 2g heavier. In comparison, it should be because the P9200CC has a thicker tongue sponge and an additional tongue fixing strap design. s reason. But in fact, for P series sneakers that focus on protection, with anti-rollover structures and anti-torsion frames, there is indeed a balance between protection and speed, and each has its own trade-offs. Will P9200CC’s highly recognizable appearance, its excellent package protection and E-TPU black technology shock-absorbing performance become your hunting target during the 618 carnival?
This article is reprinted from Zhongyu Xiaohuang's "Experience Sharing of Dai Ziying's New Boots P9200CC - Improved Details and Optimized Body Feeling". The above are the personal opinions of the author. The description and comparison of the product have nothing to do with our company.
