Water pipe repair washing machine, Plumber repairing washing machine 2
The washing machine shakes during dehydration, which may be caused by a motor failure. If the motor is running normally, it is caused by excessive wear of the pulley, which leads to unstable rotation. If the pulley is worn seriously, you can replace the new pulley; if there is a problem with the roller bearing, you need to replace the roller bearing or repair the roller shaft.
provides professional home appliance repair, home appliance cleaning, pipe dredging, waterproof and leak repair and other door-to-door services
1. First, check whether the power supply is plugged in, whether the plug of the washing machine is plugged in, etc., and whether the operation steps are correct; secondly, check whether there are debris in the washing bucket, whether the clothes are placed in the right place, etc.
2. If there is no problem with the above steps, you can perform the next step of repair: first close the water inlet valve and drain valve (note: do not close the small water inlet valve or drain valve), then turn on the power switch to see if the washing program is working normally? If there is an abnormality, press the stop button to stop the program operation; if there is no abnormality, put the clothes in the washing basket and start cleaning the clothes!
3. Finally, check if the wave plate of the washing machine is filled with water? If you have not filled with water, just adjust the water level of the wave plate to the highest water level.
4. When you are sure that the washing machine has no other problems, you can reboot and use the laundry!
should be cleaned and maintained regularly after using it for a period of time. This will not only help improve work efficiency but also extend its lifespan! It is generally recommended to clean it once every two weeks. In addition, after each use, you must clean the residue in the machine in time~ otherwise it will easily breed bacteria and affect your health~ So you must pay attention to it in normal times~
In addition to daily cleaning and maintenance, we also need to regularly inspect and repair it! This can avoid the occurrence of some safety hazards and prevent unnecessary troubles. Generally, it needs to be inspected and repaired every six months. This will ensure that it can operate normally. Therefore, it is better to regularly inspect and repair it for our health and safety~~~
After use, it must be placed in a ventilated and dry place and away from heat sources and humid environments to avoid moisture and damage electrical equipment~!
