Hotel Central air conditioner How to refrigerate - determine whether the central air conditioner can be adjusted
I believe that everyone will encounter central air conditioner in hotels that can adjust the temperature and wind, but some hotels do not support adjustment, so at this time, you must first confirm whether it can be adjusted. If you don’t know, you can call the front desk for consultation.
How to refrigerate hotel central air conditioner - hotel central air conditioner refrigeration method
1. If the central air conditioner in the hotel is confirmed to be able to adjust, there will be three aspects. The first is that the mode is generally divided into two types: hot and cold, and then the wind speed is magnitude. There are usually several fans, and the temperature is also high and low.
2. When adjusting the central air conditioner, the upper and lower buttons are generally used to adjust the temperature. The upper temperature is generally increased, and the lower temperature is basically reduced. The temperature will have a low limit. Generally speaking, it is ten degrees. If you press it down further, it will become a high temperature. Xi'an Commercial Central Air Conditioner points out that this situation must be paid attention to when adjusting the central air conditioner.
3. There is a key factor when cooling in the central air conditioner. When the wind speed is low, even if the temperature is set to be particularly low, the indoor temperature may be relatively high. The wind speed will generally work in the central air conditioner regulator. There is a small fan. Press the small fan to adjust the chopping board interface. If the blades of the displayed fan are dense, it means that the wind speed is fast.
4. The central air conditioner mode is also an important factor affecting the room temperature. If the mode is incorrect, even if the wind speed and temperature are correct, the indoor effect will not be expected. Just like the heating and cooling of the air conditioner at home, the mode at this time is usually on the SET button and a separate button, and then there is a snowflake, which means that it is cooling now.