Plumber repairer repair washing machine
(3) The dehydration bucket is not completely dehydrated, causing the water level to rise. Due to water leakage in the water inlet pipe or drain pipe leakage, the water level rises, causing the e1 alarm to generate a signal and output it to the control board. At this time, you should check whether the water inlet pipe is leaking; whether the drain valve is damaged or blocked; check whether the connections of the drain pipe are loose, and tighten the screws; if all the above methods are ineffective, please replace new parts (such as joints, etc.)
provides professional home appliance repair, home appliance cleaning, pipeline dredging, waterproof and leak repair and other door-to-door services
(4) When the washing contains metal substances, it will also cause an e1 fault alarm. (For example: stainless steel tableware) Solution: Rinse it with hot water and then use it to troubleshoot the fault
Solution: 1 Adjust the temperature setting value. 2 Adjust the water volume setting value. 3. Reduce the water temperature 4. Reach the heating time 5. Reduce the water quantity 6. Reduce the heating time
.. Treatment method: 1. Clean the debris on the wave plate. 2 Adjust the position of balance nut . 3 Loosen the fixing nut. 4 Remove the wave disc 5 and remove the magnet piece 6. Install magnet piece 7. Install the wave plate 8 and screw the fixing nut 9 and screw the locking screw 10
