I often hear novice friends say that the body is scratched again. Today, I left the warehouse and rubbed the bumper on the right side of the car. My car is very distressed. Also compensate people for painting costs. According to the feedback of novice friends, among the new friends, the proportion of scratching the car body within half a year is very high. So is there an effective way to make it out of the library quickly?
Today I will give you an explanation of the outbound record. First, I can solve how to prevent the outbound from being scratched; secondly, if the scratches are together, how to avoid the increase in the area and depth of the scratches ,Reduce losses.
Now the vehicle is parked in the standard parking space, and a car is also parked in the right parking space, ready to leave the warehouse and turn right.
Start with forward gear, look out the window on the right side,
When the right B-pillar and the right front of the vehicle When the front end is aligned,
hits the full direction to the right, you can see in the rearview mirror that the distance between the right side body and the left front corner of the right vehicle bumper is not too large, but it is more Safety.
From this, it can be seen that when the B-pillar is aligned with the front of the right front of the car, it can be safely discharged out of the library when it is filled to the right;
Next Let's advance the position of the direction to see what happens. The vehicle is still parked in the parking space, and the scene is the same as before.
Start with forward gear, look out of the right car window, when the middle position of the co-pilot window is aligned with the front of the front of the right car,
Full direction to the right, you can see in the rearview mirror that the right side body is close to the left front corner of the right car bumper, the distance is about 5 cm,
Almost reached the limit distance, but it is still safe to turn out;
It can be seen that the middle position of the co-pilot window is aligned with the front of the front of the right vehicle to the right In the full direction, it is possible to leave the warehouse without scratching, but the distance is relatively limited, and it needs to be turned out slowly during careful observation;
Below we will advance the position of the right turn again, see See if it can be abducted. The vehicle is still parked in the original parking space, and the scene is the same as the previous two times.
Start with forward gear, and look at the outer edge of the right rearview mirror. When the rearview mirror is aligned with the front of the vehicle on the right,
hit the full direction to the right, in the right side mirror, you can see that the right side of the car is approaching the left front corner of the right vehicle,
Get closer and stop when there are about two centimeters left. At this time, just turn to the right rear door position,
and then continue to keep this direction and turn right, scratching will occur.
What if two cars are already crowded together?
It was found that many novice friends when they were huddled together were to turn to the left to try to get rid of the state of scraping together. Then let's see if this method is ok? Move forward slightly in the left direction, and feel that the body is closer to the bumper on the right side.
If you continue to move forward, you will get closer and closer. This is because when you turn to the left, the front of the car will turn left, and the back half of the car will swing to the right. ,
so they will crowd together.
Now I’m in reverse gear, and I turn to the right to return to the original state of turning right.
Reverse backwards, you can see two in the rearview mirror The distance between the cars is getting bigger and bigger, and they are safely out of the crowded state.
When leaving the warehouse, sometimes when the aisle width is limited, there is no better condition to drive forward so much and then turn right? Next, there is another way to prevent scratching when the right side mirror is aligned with the front of the right car. The vehicle is still parked in the original parking space, and the scene is the same as before. Start with the forward gear and start a half-circle to the left,
and look at the right rearview mirror, you can see that the right side of the vehicle has been extended,
When the outer edge of the rearview mirror is aligned with the front of the front of the vehicle on the right side,
Filled to the right, in the rearview mirror In the middle, you can see that the right side car body and the left front corner of the right side car bumper are safe and smoothly turned.
From this we can see that in the case of limited aisle width conditions, you can turn left first to make room for the right side, and then on the same right side. When the rearview mirror is aligned with the front end of the front of the vehicle on the right, the method of swiping to the right can also complete the delivery without scratching.
