Halloween every Halloween, the class will arrange some things and invite children dressed up as various ghosts to ask for candy together. The atmosphere is really joyful.
But it is hard for parents to scratch their heads and give their children DIY clothes. The disabled people are especially unable to afford to hurt them.
My parents who want to save trouble can open the orange software and buy a set online.
If there is a regulation in the kindergarten that cannot be bought and can only be done by yourself, then digest the content of this article well. Xiaoyou throws bricks and attracts jade, giving you some DIY inspiration, and everyone will create it again.
First of all, before starting, no matter what makeup you put on your child or what kind of clothes you wear, it is best to communicate with your child first and ask if he has any characters he particularly likes. Don’t be too scary . The key is that children can accept it and grasp the degree. After all, in China, everyone is still busy.
still remember the news that a child was dressed up as a faceless man by his mother a few years ago, scaring other children to cry. However, it also reflects from the side that the faceless man really looks dressed up.
Halloween costume DIY
Don’t want to be the scariest "ghost"
But be the cutest kid
bed sheet ghost
Take a white sheet, open a hole in the eyes and mouth, and complete it.
is the easiest and most troublesome?
You can also wear pairs of sunglasses and the whole family will go out together.
mmmy
wear a white T-shirt and pants to base it, and then wrap it around the child with toilet paper or gauze. Finally, you can also add some blood color with pigments.
dress up your pet together, pay attention to your eyes, and have an inexplicable sense of joy.
Octopus
Choose a sweatshirt and buy 4-5 pairs of stockings of the same color, preferably with stripes. If there are no stripes, you can stick out the stripes yourself with tape.
The child wears a pair of stockings, and the remaining socks are stuffed with cotton or rags, tied around his waist in a circle, and then paired with a hat with eyes. A simple and cute set of gua fish costumes are finished. Walking on the road will make people unable to help but stop looking at each other. Which leg is walking?
bat suit
black clothes or dress, everyone has at least one set.
Then use an abandoned umbrella to make the bat's wings, which is very exciting. The steps are as shown in the figure below, the key point is to keep the skeleton of the umbrella.
skeleton outfit
skeleton outfit can be made with the image of white clothes and black stripes.
For example, use black tape to paste the bones, and then use a mask to make the operation simple.
If it is at night, you can also consider wearing black clothes and sticking them on your body with a fluorescent stick. When people walk on the road, they only see the skeleton. This gameplay was once very popular on Douyin.
Buy more fluorescent sticks and paste the eyes, mouth and muscles, etc., which will have better effect.
Star Wars R2
Star Wars fans must consider this look.
First find a large cylinder. If not, you can use the round basket that usually packs toys and clothes at home, the picture below. If you don't have one, you can also take a roll of hard shell paper.
dyed white with spray paint or pigment. In terms of size, remember to have the bucket cover the position below the child's knees.
helmet can be made of a washbasin, and a layer of soft sponge foam is placed inside to protect the child's head, and the size of the helmet can be adjusted.
Draw the robot's dashboard on the helmet, find some screws or bottle caps to stick them to create a high-tech effect.
Finally, use foam and cardboard to make the robot's hands and stick them on both sides of the barrel.
Fix two straps inside the trash can, so that the child can "carry" the trash can on his body, and the task is done.
It is also possible to make a robot with a square carton.
rainbow wings
Is it interesting to listen to the name? You will know that
Preparation: Corrugated paper , paint, non-woven fabric (just jam paper), strong glue or tape
First on a large piece of cardboard (reference size: 12 long 1cm, 35cm wide), cut out the excess part on the cardboard according to the figure below. See the figure below for the reference size: 25.4cm*40.6cm
After cutting it out, use a paper tray or a round dish to turn the edges and corners into round
cut multiple feathers on non-woven fabric, the size can be different Use a hot glue gun to paste these feathers on corrugated paper ml0
html l1 Finally, on the other side of the corrugated paper, use corrugated paper to make four rings for the hand, so that the wings can be put on the arm
This colored red wing is completed. Take it out and try flying
The method of using wings can also be used to make clothes.Look at the picture below:
cutelittle snail
There is a cute little girl in the family, this style is very suitable
Preparation materials: kraft paper, textured paper tape, headband, foam ball, tape, hot glue gun
cut some kraft paper. It is recommended to crumple the kraft paper at a size of 1m*1m, and then roll them up. l2
Roll up the kraft paper, and each roll is rolled up, fix it with tape to prevent it from being distorted
If it is too small, you can roll two pieces of tape together, use a hot glue gun to fix the two tapes on a cardboard, and then paste them on the cowhide roll to create a schoolbag-like effect
headband part, we can use girls' hairpin, use kraft paper to make 2 "tennis" and stick 2 foam balls to the tentacles. Finally, don't forget to have the same color
Such a look can definitely dominate the circle of friends
Little crab
Autumn is the season for (eating) crabs. It waving the crab claws is creaking, and it is full of vitality and twitching, so proud!
firstly make the shell and four legs of the crab.
crab shell can be cut out of an oval shape with a large piece of jam paper, and then cut four mouths along the dotted line, then paste a corner marked with black 1 on the white 1, and so on, you can make an arched hemispherical shape, just like the cut mouth of a facial mask.
Then cut out naturally curved crab legs from the jam paper and stick them on the crab shell, just like making a jet backpack and angel wings, and adding two straps will be OK.
crab head cover can use a container of a large bowl of instant noodles, with a straw/twist stick on it, plus two ping-pong balls or white round jam paper as the eyes, remember to draw black eyeballs.
You can also use a disposable paper tray, apply color, and carve the shape of the lower figure in the middle.
plus the eyes, wearing the head is the effect.
The most difficult part is the two crab claws.
The complex method is to cut out two crab claws, glue the edges together, and keep the opening below so that the hand can reach in; the simple method is to make only one layer, stick a chopstick or wooden stick below, so that the baby can hold it directly with his hands.
Minister Ninja Turtle
This is amazing.Minister Ninja Turtle is a super-powered character, and it has extremely oriental characteristics. What is important is that it is also very simple.
First make the iconic eye mask of the Twilight Ninja Turtle.
print the template picture of the eye mask below.
(click to open the large image to save and print it)
cut it out and put it on the jam paper or non-woven fabric to trace the corresponding shape, and then cut it out.
The shapes are very simple, and you can also draw them by hand, eliminating the steps of printing and tracing.
Then stick two orange strips on both sides of the eye mask as extended straps; the green part is glued above the middle; the non-woven fabric material is bonded with hot melt adhesive, and the jam paper is just ordinary double-sided adhesive.
Try wearing an eye mask, the jam version sticks directly to both ends.
Then make turtle shell . If you happen to have a large tin foil plate, such as the one that comes with takeaway pickled fish, it will be perfect.
tin foil plate is painted with pigment (acrylic pigment is the best). You can make a layer of brown first and then put it on green, which will give you a sense of old mottledness. After all, the "turtle" is floating in the world, so there is no way to get rid of it.
poke a small hole on both sides of the tin foil plate and tie the straps on each side.
An orange note decoration is pasted on the turtle shell, and the Tintograph will make its debut!
It doesn’t matter if you don’t have a tin foil plate to make a tortoise shell. Please refer to the crab shell method above and just change it to green jam paper.
Little Mermaid
Many little girls have a Disney princess dream. The princess's costumes on Taobao are expensive and thunderous. It's better to make a DIY outfit of the little Mermaid princess. It's simple and eye-catching!
Hard paper or EVA foam is a more suitable material, making it more rigid and stylish.
cut out half of the fish body and tail shape on the cardboard, and then it is gone.
OK, let's add semicircles of various colors as scale decoration, stick a rope and tie it around your waist, and get it done.
天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天天�
hard jam paper cut out long strips of approximately equal width, which is almost the rhythm of an 8-open paper and 6 equal parts.
Then fold each strip in half, cut off the two triangles on both sides, and leave a piece in the fold.
This way, a rectangle in the middle connects two triangles on the left and right, as the bone plate on the back of the dinosaur, as shown in the right picture below.
Use another long strip as a long spine to connect bone plates.
both sides of the triangle fold upwards and glue together with glue/double-sided tape.
Finally, use a long strip to form a circle, stick it firmly, and then fix a section of the back to form an arched shape.
dinosaur head cover is completed, try it on.
Then come to be the big feet of the dinosaur.
cut out the shape of the sole of the foot, paste the sharp claws of the triangle, and create a hole that a baby's little foot can penetrate (it is best shown below, and the hole similar to the shape of a kitten is left as a baffle); finally stick a belt to facilitate the baby to hook it from the bottom after putting it on, increasing control.
draw the following template picture and just print it out.
(click to open the large image to save and print it)
After finishing the foot, let’s take the little paws.
palm-shaped cardboard, stick a tape near the bottom (you can use a wide piece of tape to paste it to become a transparent non-stick tape).
can give a crease at the connection between the toes and palms, so that the claw shape is more natural.
From head to toe, the dinosaur cos dressed up and armed. If your baby is a dinosaur fan, then hurry up and do it!
jellyfish
strangely, many children are particularly fascinated by some uncommon marine creatures, perhaps out of curiosity about the mystery of the deep sea, such as the following person -
jellyfish, known as jellyfish, appears earlier than the dinosaurs upstairs, and are lower invertebrate creatures, but they feel particularly powerful and are even more dreamy when they shine!
DIY Is it difficult to put a jellyfish in it?
Don't be too simple!
If you happen to have a transparent umbrella, then this manual work has been completed by 80%.
The remaining 20% of the work is to find some cloth strips and ribbons to stick them on the edge of the umbrella; if not, take some plastic bags, bubble paper for packaging, etc., as shown in the figure below, cut into a mosquito coil-shaped circle, and pull it a vivid and unique "jellyfish tentacle".
try to turn it up, isn't it very fairy?
st put your eyes on the umbrella, and the cute little jellyfish is finished!
does not have a transparent umbrella? Straw hats with wide brim are also fine!
Hat also doesn't? There are always disposable shower hats in the hotel (it seems that this texture is closest to the real jellyfish)!
OK, this year's Halloween broadcast will be here first
