The 2022 Fluorination Process Examination Simulation 100 Questions Simulation Examination Platform Operation is based on the latest textbook compilation of fluorination process. [Single choice question] refers to people who act as a replacement for certain emergency organizations

2025/04/2804:28:42 education 1317

question bank source: Production Safety Simulation Examination Yitong Official Account Mini Program

2022 Fluorination Process Training Questions System Fluorination Process Simulation Examination Question Bank Theoretical Knowledge Examination Question Bank! The 2022 Fluorination Process Examination Simulation 100 Questions Simulation Examination Platform Operation is based on the latest textbook compilation of fluorination process. The fluorination process review simulation exam can be practiced at any time according to the production safety simulation exam, and the smart question bank of the Fluorination process is available.

The 2022 Fluorination Process Examination Simulation 100 Questions Simulation Examination Platform Operation is based on the latest textbook compilation of fluorination process. [Single choice question] refers to people who act as a replacement for certain emergency organizations - DayDayNews

1. [Single choice question] () refers to people who play the role of replacing certain emergency organizations and service departments during the drill, or simulate emergency events and developments. (C)

A, participant

B, observer

C, simulator

2, [Single choice question] 1 standard atmospheric pressure = ()mm mercury. (C)

A, 660

B, 860

C, 760

3, [Single choice question] In the F22 production process, the main production task is production (). (C)

A, F21

B, F23

C, F22

4, [Single choice question] The "Production Safety Law" was formulated by (). (A)

A, National People's Congress Standing Committee

B, State Administration of Safety

C, State Council

5, [Single choice question] "Fire Classification" stipulates that fires caused by solid substances, such as wood, cotton, wool, hemp, paper, etc. are called ()-type fires. (C)

A, C

B, B

C, A

6, [Single choice question] For safety reasons, steam pneumatic valves generally use (). (C)

A, unimportant

B, air-closed

C, air-open

7, [Single choice question] acetylene has a weak anesthetic effect. Contact with acetylene can cause symptoms of hypoxia to varying degrees. (B)

A, 1%-2%

B, 10%-20%

C, 5%-10%

8, [Single choice question] In accident emergency rescue, () is the most basic principle of emergency activities. (A)

A, unified command

B, hierarchical response

C, public mobilization

The 2022 Fluorination Process Examination Simulation 100 Questions Simulation Examination Platform Operation is based on the latest textbook compilation of fluorination process. [Single choice question] refers to people who act as a replacement for certain emergency organizations - DayDayNews

9, [Single choice question] The following statement about surface water monitoring is incorrect (). (A)

A, fluoride is a must-test item

B, total hardness is a must-test item

C, ammonia nitrogen is a must-test item

10, [Single choice question] Any unit () has the obligation to participate in organized fire extinguishing work. (B)

A, citizen

B, adult citizen

C, teenagers

11, [Single choice question] The following statement about the basic points of fire handling is incorrect (). (D)

A. No matter at any time or place, once the fire catches, you must immediately report to the fire safety leadership group of the project

B. Organize manpower to monitor buildings, material stacking and other places around the fire site, and timely extinguish the fire from burning out

C. Arrange manpower and equipment to transfer materials threatened by the fire to a safe area to prevent the spread of the fire and prevent the fire from spreading. Fires occur in places where people are concentrated. Everyone should actively find and rescue besieged

12. [Single choice question] A safety station in a certain city conducts safety inspections on the construction site in accordance with the law. According to the provisions of the "Production Safety Law", the following practices regarding safety inspectors are correct (). (D)

A. Make a written record of the problems found during the inspection, and require the safety management personnel of the inspected unit to sign

B. It is found that the safety helmet worn by the construction personnel does not meet the regulations. It is required to purchase a qualified brand of safety helmet

C. In order to facilitate entry into dangerous areas for inspection and ensure inspection safety, the company was ordered to stop construction and undergo inspection

D. The company's technical secrets of energy-saving and environmentally friendly interior wall insulation coating learned during the inspection, strictly keep it confidential

13. [Single choice question] Low carbon mainly reduces () emissions.(A)

A, carbon dioxide

B, nitrogen

C, oxygen

14, [Single choice question] According to the " Work-Injury Insurance Regulations ", the person who can not pay work-injury insurance for them is (). (B)

A, people with labor contract

B, investors

C, people with labour relations but not signing a labor contract

15, [Single choice question] There are flammable and explosive substances in the vinylidene fluoride production device. During the maintenance of the device, the management of fire operation should be strengthened. Among the following operations, the one that does not belong to fire operation is (). (A)

A, operating electric valve

B, welding operation

C, using grinding wheel to polish

16, [Single choice question] Power outage maintenance operations must strictly implement the () system. (B)

A, monitoring

B, monitoring

C, filing

17, [Single choice question] () functions are mainly set for the working environment and conditions, and generally have anti-slip, anti-puncture, and anti-squeezing functions. (C)

A, protective clothing

B, protective gloves

C, protective shoes

D, protective glasses

18, [Single choice question] Analysis of pure chemical reagent tag color as (). (A)

A, red

B, green

C, brown

19, [Single choice question] Production and operation units shall establish a unit head () and establish a unit head attendance file. (B)

A, shift system

B, on-site shift system

C, daily inspection system

D, patrol system

20, [Single choice question] When chemical raw materials calcium carbide or acetylene catches fire, it is strictly forbidden to use () to extinguish the fire. (B)

A, carbon dioxide fire extinguisher

B, carbon tetrachloride fire extinguisher

C, dry powder fire extinguisher

21, [Single choice question] When welding in a humid environment, the safety voltage should be ()V. (B)

A, 42

B, 12

C, 36

22, [Single choice question] The fall range radius R varies with height h. When the height h is 20 meters, the radius R is () meters. (C)

A, 2

B, 3

C, 4

D, 5

23, [Single choice question] After the template is installed in place, the lightning protection security protection measures taken are to connect the large templates in series and connect them with (). (A)

A, lightning protection network

B, support

C, ground line

D, none of them are

24. [Single choice question] Do not approach high-voltage pole tower lightning rod , stay away from at least ()m. (B)

A, 10

B, 20

C, 15

25, [Single choice question] Production and operation units with occupational hazards shall entrust intermediary technical service institutions with corresponding qualifications to conduct () occupational hazard factor testing at least every year and evaluate the current occupational hazard status at least every three years. (A)

A, 1

B, 3

C, 2

26, [Single choice question] Professional safety technical knowledge education in safety education refers to the education of professional safety technical knowledge that must be possessed for a certain type of job, and does not include () knowledge education. (B)

A, boiler lifting machinery

B, production technology

C, industrial dust and toxicity

27, [Single choice question] When someone is injured by chemicals at the leakage site, you should ().(A)

A. Transfer the injured to a safe area for rescue

B. Emergency rescue

C at the leakage site. Ignore it and escape by yourself

28. [Single choice question] When the equipment encounters the shell and leaks electricity, the electric shock caused by the human body contacting the metal shell of the equipment is called (). (B)

A, indirect contact electric shock

B, direct contact electric shock

C, electrostatic electric shock

29, [Single choice question] The order of removal when removing scaffolding is (). (A)

A, first put it on, then put it on, then put it on, first remove it on, first remove it on, then put it on, then remove it on,

C, no matter how you choose, first remove it on, then remove it at the same time, without distinction, then remove it on, and remove it at the same time. [Single choice question] The main feature of desktop drills is to conduct oral drills on the drill scenario, which are generally held in (). (B)

A, production site

B, conference room

C, accident site

31, [Single choice question] In 2015, a balcony railing project of a high-end residential community in M ​​City was accepted, and some problems that need to be repaired were found. The construction unit arranges workers to repair defects in individual problems found during railing acceptance. Later, the handyman Wang climbed over the inner railing of the 16th floor flower bed and stood on the outside of the 16th floor flower bed about 30 cm wide and without any protection. He slipped down from the 16th floor flower bed, and accidentally fell from the 1st floor to the ground with a drop height of about 48 meters. After rescue failed, he died. After investigation, it was found that the construction unit's safety management was chaotic, and there was no full-time safety officer for at the site, and no security technical briefing was conducted. Wang only entered the site for three days, did not receive safety education, and took risks in violation of regulations and carried out high-level and hanging operations on the edge without wearing a seat belt or any safety protection measures. The construction unit only used, did not manage, or educated workers. Please answer:
(1) For operations at the edge of the edge, protective measures must be set up. A safety flat net must be set up on the periphery of the second floor where the height of the first floor wall exceeds () and a floor where the height of the external scaffolding exceeds () must be set up on the periphery of the periphery. (B )

A, 3.0m; 3.0m

B, 3.2m; 3.2m

C, 3.6m; 3.6m

D, 4.0m; 4.0m

32. [Single choice question] In the elevator shaft of , a company built by a company, four people from the carpenter team, Kong and Li, stood on the chassis of the fixed large formwork in the well, lifting the chassis from the 11th floor to the 12th floor. The four people used wire ropes to pass through the lifting ring to hang it. When the lifting signal worker Chen (unlicensed) commanded the 12th floor, because the two support points on the south side were not in place, the carpenter team leader Gao went up to the chassis to help adjust. Due to the unreasonable hanging, the chassis was under uneven force and gradually tilted to the south. Except for Li, the other four fell to the first floor and the two died on the spot. Please analyze the cause of the accident.
(1) The following statement regarding the cause of this accident is incorrect (). (D)

A, there is no lifting plan on site

B, no safety technical briefing for operators

C, people on the lifting objects

D, workers not wearing safety helmets

33, [Single choice question] Dangerous items referred to in the "Production Safety Law" include (). (A)

A, flammable and explosive items , hazardous chemicals, radioactive items

B, guns and ammunition

C, high-pressure gas cylinder

D, handheld power tool

34, [Single choice question] When inspecting compressor in the fluoroelastomer polymerization position, the compressor power must be cut off, and after starting and re-checking, the "Prohibited Start-up" safety sign is hung on the power switch box and ().(C)

A, dispatching people to do their jobs

B, demarcate restricted areas

C, add locks

35, [Single choice question] The following does not meet the requirements of the rolling drum are (B )

A. The height of the edges on both sides of the reel should exceed the outermost steel wire rope

B. The height value of the edges on both sides of the reel is less than 2 times the diameter of the wire rope

C. The fixing device at the tail end of the wire rope on the reel should have anti-loosening or self-tightening properties

D. The reel should not have cracks or damaged rims

36. [Single choice question] The principle of glass tube level gauge is (). (B)

A, capillary phenomenon

B, connecter principle

C, siphon phenomenon

37, [Single choice question] The comprehensive emergency plan prepared by production and operation units, special emergency preparatory, safety production simulation examination, the case and on-site disposal plan should () each other. (A)

A, connecting

B, independent

C, restricting

38, [Single choice question] The electric box for temporary electricity consumption at the construction site must be rainproof and dustproof. In order to prevent rainwater and dust from invading electrical appliances, the inlet and outlet of the electrical box wire must be installed in (). The inlet and outlet wire should be tightened with the box. The wire must not bear excessive tension and be sheathed, and be divided into bundles. The wire must not come into direct contact with the inlet and outlet of the box to prevent insulation wear. (D)

A,

B on the back of the box,

C on the top of the box,

D on the side of the box,

D on the bottom of the box,

39 on the bottom of the box, [Single choice question] The color of the protection wire (grounded or neutral wire) should be used according to the standard ( ) . (C)

A, red

B, blue

C, yellow and green two-color

D, red and blue two-color

40, [Single choice question] " lifting machinery safety supervision regulations " stipulates that during the manufacturing process of lifting machinery, the inspection and testing agency shall supervise and inspect in accordance with the scope, items and requirements specified by the safety technical specifications and other regulations. (A)

A, manufacturing location

B, installation location

C, use location

D, registered location

41, [Single choice question] According to the "Handle Safety Management Regulations on the Safety Management of HTML Construction Project ", after a safety accident occurs, () should take measures to prevent the accident from expanding and protect the accident site. (D)

A, general contractor

B, construction general contractor unit

C, project contractor

D, construction unit

42, [Single choice question] The responsibility of the person in charge of the production and operation unit in emergency rescue is (). (C)

A. Arrange the cleaning and cleaning of the accident site.

B. Statistical losses and punish relevant illegal operators.

C. Quickly take effective measures to organize rescue. Mediate the pipelines. [Single choice question] When using () to purge the pipeline, you should first slowly warm the pipes and lead the condensate water to a safe position to discharge them cleanly to prevent water damage. There are safety measures to prevent people from burning. (C)

A, nitrogen

B, air

C, steam

44, [Single choice question] The damage of welding arc to the human eye is mainly radiation (). (B)

A, infrared

B, ultraviolet

C, X-ray

45, [Single choice question] Currently, the highest incidence of occupational diseases in my country is (). (B)

A, lead poisoning

B, pneumoconiosis

C, noise deafness

46, [Single choice question] The wire rope is classified according to the twisting method, and the left interactive twist is represented by ( ) . (B)

A, ZS

B, SZ

C, ZZ

D, SS

47, [Single choice question] Operators conduct at least () safety production education and training every year. Persons who fail the safety production education and training assessment shall not take up their posts.(D)

A, five times

B, three times

C, two times

D, once

48, [Single choice question] The general dust allowed in the workshop air is ()mg/?. (A)

A, 10

B, 1

C, 20

49, [Single choice question] A commercial and residential building has been topped off, and the painting of the top floor has basically ended. At that time, due to the lack of work on the lifting work on the construction site, Wang, a technician and safety officer, arranged two tower crane drivers to copy the level on the second floor. At about 14:30, because the roof of the top floor required two buckets of mortar, Wang did not ask the tower crane driver to operate it. He climbed to the tower crane operation room and personally operated it. After lifting the two buckets of mortar, in order to save trouble, Wang climbed from the tower crane for the forearm and wanted to jump directly to the building to inspect the work through the tower arm. When Wang climbed above the sixth floor rooftop, his arms were hanging under the tower crane to jump down the rooftop, a strong wind suddenly blew, squeezing the hanging arm off the rooftop. Wang fell to the ground due to lack of physical strength and died after rescue failed.
(4) The indirect cause of the accident was caused by the sudden blow of the crane arm off the roof. () (A)

A, correct

B, error

50, [Single choice question] The rated load capacity is 800kg electric, single-layer climbing high-altitude work hanging basket is ( ). (A)

A, ZLP800

B, 2ZLP800

C, ZLJ800

D, ZLSP800

51, [Single choice question] () is the basic requirement for us to do our job well, and it is also the basis for evaluating or assessing employees' work achievements. (C)

A, labor discipline

B, compliance with laws and regulations

C, job responsibilities

D, work tasks

52, [Single choice question] When entering the fluoroelastomer polymerization reactor for operations, the oxygen content must be monitored. When the oxygen content cannot be lower than ()%, it is strictly prohibited to enter to avoid causing hypoxia and suffocation accidents. (C)

A, 14

B, 16

C, 18

53, [Single choice question] It can be judged by the following standard package number, and standard () is a national standard. (C)

A, TJ34-79

B, 2893-82

C, G

D, J22-91

54, [Single choice question] In the warehouse where explosives are stored, () lighting equipment should be used. (D)

A, incandescent lamp

B, fluorescent lamp

C, iodine tungsten lamp

D, explosion-proof lamp

55, [Multiple choice question] All chemicals that have ( ) dangerous properties such as toxicity, corrosion, radioactivity, etc., and can cause combustion and explosion under certain conditions, resulting in personal casualties and property losses, etc. during transportation, loading and unloading, production, use, storage, and storage, are collectively called dangerous items. (BD)

A, odor

B, explosion

C, color

D, flammable

56, [Multiple choice question] When the mixer is (), the hopper should be lifted to the top dead center and locked with an insurance chain. (ABCD)

A, maintenance

B under the hopper, moving

C in the field, transport

D from a distance, ending work

E, working

57, [Multiple choice question] The "one eliminate" and "two controls" in the casualty control targets refer to (). (ACD)

A, eliminate serious injuries and deaths

B, eliminate major or above safety accidents

C, control annual negative injury rate

D, control annual safety accident rate

E, control annual work injury accident frequency within 1‰

58, [Single choice question] Operators have the right to criticize, report and accuse the safety issues existing in the "safety production simulation test" operation conditions, () and operating methods at the construction site, and have the right to refuse illegal command and force risky operations.(B)

A, work environment

B, work program

C, work method

D, work method

59, [Multiple choice question] When filling with media with toxicity of ( ), the selected explosion fragment shall not produce fragments, fall off or sparks during blasting. (ABCD)

A, flammable and explosive

B, extremely harmful

C, highly harmful

D, highly corrosive

60, [Multiple choice question] The correct requirements for material stacking on construction sites is (). (ABCD)

A,

B, placing

B, placing neatly and orderly

C, hanging the pile of names, varieties, specifications, signs

D, flammable and explosive items should be stored in a special warehouse

E, and leaning against the fence when site restrictions are restricted

61, [Single choice question] A construction technician of a highway project department arranges construction machinery and equipment according to the construction site situation. Because the soil in the soil extraction area was soft and wet, the construction worker made specific arrangements. Please determine whether the following arrangement is reasonable:
(3) backfill area is sandy (which is non-climatic soil), and use a convex roller for initial pressure and re-pressure, and use a tire roller for to roll the final pressure. () (B)

A, correct

B, error

62, [Multiple choice question] The unit volume of the tanker (tank container) filled with high and low pressure liquefied gas is determined according to the medium design temperature ( ). (BC)

A, saturated vapor pressure

B, 5% gas phase space reserved in the tank

C, medium density

D, saturated vapor pressure

63, [Multiple choice question] The cost required by the construction unit to include the () in the construction project budget shall be used for the procurement and update of construction safety protective equipment and facilities, the implementation of safety construction measures, and the improvement of safety production conditions, and shall not be used for other purposes. (AD)

A, safe working environment

B, construction plan

C, safety special organization design

D, safety construction measures

E, labor protection supplies

64, [Judgement question] Operators shall abide by the mandatory standards, children's systems and operating procedures for safe construction, and correctly use safety protective equipment, machinery and equipment. (√)

65. [Judgement Question] " Special Equipment Safety Law of the People's Republic of China " stipulates that when the department responsible for the safety supervision and management of special equipment implements safety supervision and inspection, more than three special equipment safety supervision and inspection personnel shall participate and present valid special equipment safety administrative law enforcement certificates. (×)

66. [Judgement Question] The accident report should be timely, accurate and complete. No unit or individual shall report an accident late, miss, lie or conceal the accident. (√)

67. [Multiple choice question] After installing the leakage switch, the metal shell of the device does not need to be protected and grounded or protection connected to zero . (×)

68. [Judgement Question] The legislation of " Hazardous Chemical Safety Management Regulations " is to strengthen the safety management of hazardous chemicals, prevent and reduce hazardous chemical accidents, ensure the safety of people's lives and property, and protect the environment. (√)

69. [Judgement Question] If an enterprise entrusts an institution that complies with the regulations to provide safety production technology and management services, the responsibility for ensuring safety production is still the responsibility of this unit. (√)

70. [Judgement Question] " Production Safety Accident Reporting and Investigation and Handling Regulations " will pass the accident, production safety simulation exam, and the principle of " four not letting " will be carried out throughout the whole process, providing clear operating procedures for accident reporting and investigation and handling. (√)

71. [Judgement Question] perfluoropropylene production equipment has many toxic substances, and ventilation and isolation should be strengthened in the workplace to reduce the concentration of toxic and harmful gases.(√)

72. [Judgement Question] The system voltage of the entire machine should be 24 volts. (√)

73. [Multiple choice question] Any fire extinguisher can be used in any place. (×)

74. [Multiple choice question] The template removal should be balanced and symmetrical. The removed parts and all items on the operating platform shall not be thrown away from a high place. () ( √ )

75. [Judgement Question] During the process of material change, only the appearance or state of matter changes, which is called physical change. (√)

76. [Judgement Question] " Special Equipment Safety Law " stipulates that special equipment safety management personnel shall conduct regular inspections on the use of special equipment and shall deal with problems immediately when they find them; when the situation is urgent, they may decide to stop using special equipment and report to the relevant person in charge of the unit in a timely manner. (√)

77. [Judgement Question] The work done by current per unit time, the production safety simulation test is called current. (×)

78. [Multiple choice question] Construction units must strictly build construction scaffolding in accordance with national standards and specifications. They must purchase and rent steel pipes, fasteners with product manufacturer production license, product quality certificate, inspection certificate and product identification. () ( × )

79. [Judgement Question] Construction sites should establish a public disclosure and tracking and rectification system for major hazardous sources. (√)

80. [Judgement Question] If the test and evaluation results of the workplace occupational disease hazard factors are not archived and reported and published, the safety production supervision and management department will warn the employer and order the employer to correct the problem within a time limit; if the correction is not corrected within the time limit, a fine of less than 100,000 yuan will be imposed. (√)

81. [Multiple choice question] In excavation operation, excavated soil shall not be stacked within 1m of both sides of the trench. (√)

82. [Multiple choice question] Organic fluorine storage tanks only need to perform oxygen content testing when entering the tank. (×)

83. [Multiple choice question] The maximum temperature allowed by pressurizing the gas to liquefy is called the critical temperature. (×)

84. [Multiple choice question] The electroslag pressure welding device that has not obtained 3C certification. As long as the secondary no-load voltage does not exceed 24V, it can be used (×)

85. [Multiple choice question] The prompt sign is a blue color with the command meaning in the circle, and a white graphic symbol is used to represent the matters that must be fulfilled, which constitutes the command sign of the command. (×)

86. [Multiple choice question] Before and after filling the gas cylinder, the operating personnel of the filling unit should check the gas cylinders one by one. If the overload is leaked or other abnormal phenomena are found, they should be properly handled immediately. (√)

87. [Multiple choice question] You must wear a hard hat when conducting on-site work areas. (√)

88. [Judgement Question] acetylene bottle can be placed horizontally when stored or used. () ( × )

89. [Judgement Question] Production and operation units shall not enter into an agreement with employees in any form to exempt or reduce their responsibilities for employees who are responsible for the "safety production simulation test" due to production safety accidents and casualties. (√)

90. [Judgement Question] Employees in production and operation units have the right to understand the risk factors and emergency measures for accidents in their workplaces and jobs, and have the right to make suggestions on the safety work of their units. (√)

91. [Judgement Question] The "Fujian Province Construction Engineering Safety Management Measures" stipulates that construction workers shall abide by the construction safety management rules and regulations and operating procedures of construction projects, and correctly use safety protection supplies, machinery equipment, and protective facilities. () ( √ )

92. [Judgement Question] Maintenance personnel should place eye-catching warning signs when maintaining and repairing operations during the construction elevator operation. (×)

93. [Multiple choice question] The basic principles of professional ethics are used to guide and restrain people's professional behavior and need to be reflected through specific and clear norms. (√)

94. [Judgement Question] When using a seat belt, you should check whether the parts of the seat belt are complete and damaged, and whether there are broken strands or scalds in safety rope .(√)

95. [Multiple choice question] The cost required for expert demonstration of sub-projects that exceed a certain scale can be withdrawn from the enterprise safety production cost . () ( √ )

96. [Multiple choice question] The electrical fuse is blown, and copper wire or iron wire can be replaced. (×)

97. [Multiple choice question] It is prohibited to gather people overweight on scaffolding and scaffolding boards or place materials that exceed the calculated load. (√)

98. [Judgement Question] polytetrafluoroethylene is insoluble in water, so there is no need to analyze the water content during the installation and use of the feeding main pipe. (×)

99. [Multiple choice question] The design pressure of the pressure vessel equipped with a safety device can be less than the opening pressure or blasting pressure of the safety device. (×)

100. [Multiple choice question] After the safety valve on the device is leaked, the root valve can be closed and then continued to be used for a long time. (×)

supports the test questions for precision fluorination process operations in various regions across the country, supports safety qualification certificate, special operation certificate , professional skills appraisal and other job question bank exercises.

education Category Latest News