dust-proof test chamber
dust-proof test chamber uses a fan to push a certain concentration of sand and dust to blow over the surface of the test sample at a certain flow rate to test the ability of these test samples to prevent the penetration effect of dust particles when exposed to dry sand or dust-filled atmosphere, the ability to prevent the abrasion or blocking effect of gravel , and the ability to store and operate.
dust-proof test chamber troubleshooting
dust-proof test chamber is used to test the sealing performance of the product's shell. It mainly refers to the two-level test methods of IP5X and IP6X to simulate the sand and dust environment encountered by the product during the production, transportation, and storage processes, thereby testing the protective performance of its shell. Nowadays, the role of dustproof test equipment in quality control is getting more and more attention. Especially when parts manufacturers provide related products to large vehicle manufacturers, they must meet relevant standard test requirements and perform verification work according to various relevant standards during the product design stage. During the test of the
dust-proof test chamber, the sand and dust test chamber may malfunction due to power outages, operating errors, etc. How to deal with test faults without affecting the reliability and authenticity of the test results?
Temak dust-proof test chamber
Sand and dust test chamber troubleshooting method
1. The instrument does not light up and has no power when the dust-proof test chamber is turned on: Check whether the power supply is normal, check whether the phase sequence is normal, and whether there is a neutral line.
2. No sand and dust blowing: Check whether the blower is working normally or the fan is too small, and check whether the dust is dry.
3. No vibration: Check whether the vibration motor is normal.
4. The dust-proof test chamber should be managed and operated by dedicated personnel, and the box and blower should be cleaned regularly, and should be maintained by professionals on a regular basis.
5. In order to stably exert the functions and performance of the test chamber, a space with a year-round temperature of 15-25°C and a relative humidity of less than 85% should be selected.
6. The distance between adjacent walls or objects. The ambient temperature of the installation site must not change drastically. It should be installed in a place with no direct sunlight, good ventilation, away from combustibles, explosives and high-temperature heat sources, with little dust, and close to the power supply.
7. The equipment is out of power: Check whether the power supply is normal, check whether the phase sequence is normal, and whether there is a neutral line.
