Roots blower material is made of ductile castings, and the shape and outline is finished by CNC machine tool. The gear has five-level precision, high accuracy, and low equipment noise. Reliable operation ;
The actual working pressure and current after the fan is connected to the system should be lower than the pressure displayed on the nameplate. If overloaded, it usually means improper selection and requires strict troubleshooting and analysis. 1 working principle 2 Roots supercharger 3 rotor design Two-leaf rotor three-leaf rotor Roots blower Roots supercharger working principle under the working principle of Roots supercharger Roots supercharger is included in a pair of two-leaf rotor Roots.
Roots drum Roots fan use has greatly improved Chen's life. The installation of Roots Drum Roots Fans must be paid attention to for a long time, so as to delay the service life of Roots Drum Roots Fans.
. When welding the pipes of the Roots Drum Roots Fan, the imported flange of the Roots Drum Roots Fan must be welded with a blind cover and then connected with the welding slag. Move together to prevent foreign matters such as welding slag from entering the Roots Fan.
For example, when gases flow through the throttling installation, the airflow pressure will decrease accordingly, ie they lose the useful power of the Roots blower. Because all this happens during the process of the Roots blower conveying gas, that is, the air volume of the Roots blower is wasted. When the centrifugal Roots blower is working, a certain capacity of air is forced to be transported through the movement of the blades of the centrifugal Roots blower. Different types and models of centrifugal Roots blowers have different air volumes and speed relationships.
centrifugal fan . Boiler induced fan. Dust exhaust fan. Roots fan. fire blower . Boiler fan. High pressure fan. Material conveying fan. Carton industry machine. food machinery fan. Glass supporting fan. Coating industry fan, etc.
can be divided into two-leaf Roots blower. three-leaf Roots blower . High pressure Roots blower. Roots blower troller troller. Roots blower and other special seals. According to its use, it can be divided into: aeration fan, vaporization fan, return-feeding Roots blower, back-flushing Roots blower, force transportation Roots blower, micro-hole aeration oxygen-enhancing Roots blower, etc. According to the industry, it can be divided into : chemical Roots blowers. Electric power industry Roots blowers. Steel enterprise Roots blowers. Roots blowers in the cement industry. Sewage treatment industry Roots
Roots drum Roots blowers is a rotary compressor that controls the two blade rotors to perform relative movement in the cylinder to compress and transport gas. This compressor connects two rotors through a synchronous gear at the end of the rotor shaft.
(2)Secondly, look at the bearing. Fans have relatively picky requirements for bearing , which requires high temperature resistance and high wear resistance.
(3) Because the Roots blower has high operating temperature, the requirements for the triangle belt are also high. The triangle belt with poor quality is prone to deviation and breaking, which affects the accuracy of the gear and directly affects the coordination of the impeller . The accuracy and hardness of the gear are directly related to the operating efficiency of the impeller. Whether to configure high-quality gears is also an important indicator for checking the overall quality of the fan
(4), and it is also a comparative indicator for each fan product. For this, customers with conditions can use a feeler gauge to detect the gap between the impellers. If there is no feeler, paper of different thicknesses can also be replaced.
