Current status of medical waste generation and disposal in my country
Following the normalization of nucleic acid testing, the construction of 15-minute sampling circles and nucleic acid sampling huts is accelerating. It is not difficult to find that disposal units will face the challenge of "daily production and daily disposal" of medical waste.
Recently, the relevant person in charge of the Solid Waste and Chemicals Department of the Ministry of Ecology and Environment responded to the national medical waste generation situation, disposal capacity and actual disposal situation. The person in charge introduced that medical waste includes five categories: infectious waste, damaging waste, pathological waste, chemical waste, and pharmaceutical waste.
In 2021, my country produced a total of 1.4 million tons of medical waste, a year-on-year increase of more than 10%. In order to cope with the increasing increase in medical waste, the national medical waste disposal capacity is accelerating. As of the end of 2021, there are 540 centralized medical waste disposal units across the country, with a centralized disposal capacity of 2.15 million tons per year, and the disposal capacity has increased by 39% compared with 2 years ago.
Main methods of medical waste treatment
The main treatment methods of medical waste include pyrolysis incineration, high-temperature steam, microwave disinfection, rotary kiln incineration, etc. No matter which processing technology is used, crushing and pre-processing of medical waste is an essential link.
Thred has rich experience in medical waste pretreatment. Its professional medical waste shredder can effectively handle various medical wastes. According to the characteristics of medical waste, it develops and manufactures a special medical waste shredder - TS508. The TS508 crusher is specially used in the crushing and processing process of medical waste. It is integrated into the Shred Medical complete line crushing system and plays the role of crushing and destroying medical waste.
Medical waste crushing system
Sread medical waste crusher model has a heavy-duty design, solid structure and good anti-vibration effect. alloy steel knife plate has strong bearing capacity and high crushing effect. The moving blade is forged from alloy steel, hardened and wear-resistant, not easy to wear, and can be quickly repaired and reused; PLC fully automatic control system, the electronic control system is set up with automatic reverse overload protection when encountering hard objects to protect the host; bucket type The elevator automatically loads materials, which greatly increases the crushing output.
Discharging effect:
The material discharged after crushing has uniform particle size, and most of the material crushing size is less than 50mm, which meets the technical requirements of medical waste crushing treatment and achieves the purpose of crushing, destruction and improving incineration efficiency.
