If the milling machine fails to move forward after starting work, how should we troubleshoot the problem? If you are interested, come and have a look!
1. Check whether the brake button is released.
2. Whether you have selected forward or reversed settings.
3. Whether the throttle is at low level, the gear lever may not return to the neutral position.
4. The milling drum is not opened and touches the ground, resulting in excessive help.
5. The ski backflush plate is in the working position and the computer is not allowed to walk.
6. The milling drum scraper is turned on, and the computer is not allowed to walk.
7. The fuel tank runs out of fuel.
8, walking motor is damaged or the relay, fuse, or line is faulty.
Company supplies various models of pavers scraper drive shaft , scraper drive shaft assembly, leveling meter, leveling meter bracket and various models of hydraulic pump . Our factory also supplies other paver wear parts, milling machine and road roller accessories, domestic and imported parts, mainly pushing paver balance beam, dragon axle, pedal, material conveying base plate, blade, screeding board, reducer , chain rail, crawler board, , support wheel, scraper large chain, material conveying chain, etc.
Disclaimer丨 Some content comes from the Internet! This article is for communication and learning only. The copyright belongs to the original author. Some content was not contacted in time when pushing. If the source labeling is incorrect or infringes on your rights, please let us know and we will delete it immediately.
