Production safety management: safety supervision and inspection, safety hazard rectification, safety accident handling

pay attention to [this headline number] more about systems, processes, systems, positions, templates, programs, tools, cases, stories, books, copywriting, reports, skills, workplace , etc., Freebook 5 years of accumulation for free Share with you!

reading navigation →

01 safety supervision and inspection

02 safety hazard rectification

03 security incident handling

1. Safety supervision and inspection

safety production supervision and inspection is an important content of safety management , it is to prevent accidents and expose the production process It is one of the necessary means to avoid unsafe hidden dangers.

. The work content of safety supervision and inspection

Safety production supervision and inspection mainly includes 5 aspects: inspection of regulations, inspection of management, inspection of publicity and training, inspection of hidden dangers, and inspection of accident handling. The purpose and specific contents of the work safety supervision and inspection are as follows.

Purpose and work content of production safety supervision and inspection

. Hierarchical security risks

According to the difficulty of solving hidden dangers, it is divided into three levels: A, B, and C, and hierarchical management is implemented.

(1) Grade A: It is very difficult and cannot be solved by the company. Professional safety management agencies must assist in eliminating hidden dangers.

(2) Grade B: Hidden dangers that are difficult and cannot be solved by the workshop and production department, and must be solved through consultation by the leaders of the enterprise.

(3) Grade C: Hidden dangers that the workshop can solve or must solve by itself.

. The rectification principle of hidden dangers in production

The management of hidden dangers in production safety must be effectively managed according to 5 principles. The processing principle is as follows.

Timeliness

The safety hazards discovered and checked out should be dealt with in a timely manner, and it is strictly forbidden to delay or even not deal with them. And funds are the guarantee to ensure timely, rapid, and safe management of potential safety hazards The file

shall implement the system of "checking back and looking back" to prevent new security risks due to incomplete handling of hidden dangers.

. Rectification measures for hidden dangers

Safety management Renyun should implement the means of rectification of hidden dangers and formulate relevant systems to ensure that the rectification of hidden dangers is in place and eliminate hidden dangers in the bud. There are 6 specific rectification measures for potential safety hazards, and the main points of operation are as follows.

pay attention to [this headline number] more about systems, processes, systems, positions, templates, programs, tools, cases, stories, books, copywriting, reports, skills, workplace , etc., Freebook

5 years of accumulation for free Share with you!

reading navigation →

01 safety supervision and inspection

02 safety hazard rectification

03 security incident handling

1. Safety supervision and inspection

safety production supervision and inspection is an important content of safety management , it is to prevent accidents and expose the production process It is one of the necessary means to avoid unsafe hidden dangers.

. The work content of safety supervision and inspection

Safety production supervision and inspection mainly includes 5 aspects: inspection of regulations, inspection of management, inspection of publicity and training, inspection of hidden dangers, and inspection of accident handling. The purpose and specific contents of the work safety supervision and inspection are as follows.

Purpose and work content of production safety supervision and inspection

Aspects	Purpose	Specific work content
Check whether the rules and regulations are correct 0	Improving employees' awareness of compliance with disciplines	Strictly implement
Check management	Eliminate potential safety hazards	Check the company's production safety management status, and check whether the company's safety management work is comprehensive and in place Whether the education and training work is regularized and institutionalized
Check for hidden dangers	Improve the safety of personnel, equipment and facilities Check the handling of the accident occurred in the enterprise to check whether the handling is reasonable and appropriate. The form and operation points of safety supervision and inspection There are four main inspection forms for safety supervision and inspection of production: special inspection, factory-level inspection, workshop-level inspection, and team -level inspection. The specific operation points are as follows. Special inspection u Safety supervisors and workshop managers implement safety inspections during production safety months or before festivals u Cooperate with local government security departments to do various special inspections. Factory-level inspection u The safety supervisor conducts a major safety inspection of the workshop and warehouse once a month. The safety supervisor summarizes the inspection results and tracks and implements rectification. Supervise and jointly manage Workshop-level inspection u In order to ensure the normal and safe production on site, workshop safety officer conducts daily safety inspection, pays close attention to any abnormal phenomenon on site Safety propaganda before the class, on-site tidying and rectification after the class, team-level inspection u The safety leader of the team should conduct safety inspections before and after the class, and pay close attention to the safety of the scene during the class, and eliminate unsafe factors in time. And report to the superior 2. Rectification of hidden dangers The rectification of hidden dangers of production is the main content and central task of the supervision and management of safety management personnel, establish and improve the management system for the investigation and rectification of hidden dangers of accidents, timely and effectively investigate and rectify all kinds of hidden dangers of accidents, and reduce the risk of accidents. The occurrence of safety production accidents plays a decisive role.

. Hierarchical security risks

According to the difficulty of solving hidden dangers, it is divided into three levels: A, B, and C, and hierarchical management is implemented.

(1) Grade A: It is very difficult and cannot be solved by the company. Professional safety management agencies must assist in eliminating hidden dangers.

(2) Grade B: Hidden dangers that are difficult and cannot be solved by the workshop and production department, and must be solved through consultation by the leaders of the enterprise.

(3) Grade C: Hidden dangers that the workshop can solve or must solve by itself.

. The rectification principle of hidden dangers in production

The management of hidden dangers in production safety must be effectively managed according to 5 principles. The processing principle is as follows.

Timeliness

The safety hazards discovered and checked out should be dealt with in a timely manner, and it is strictly forbidden to delay or even not deal with them. And funds are the guarantee to ensure timely, rapid, and safe management of potential safety hazards The file

should implement the system of "check back and look back",Prevent new hidden dangers from appearing due to incomplete handling of hidden dangers.

. Rectification measures for hidden dangers

Safety management Renyun should implement the means of rectification of hidden dangers and formulate relevant systems to ensure that the rectification of hidden dangers is in place and eliminate hidden dangers in the bud. There are 6 specific rectification measures for potential safety hazards, and the main points of operation are as follows.

Security hazard rectification measures and operation points

Aspects	Purpose	Specific work content
Check whether the rules and regulations are correct 0	Improving employees' awareness of compliance with disciplines	Strictly implement
check and manage	to eliminate potential safety hazardsAnd check whether the safety management work of the enterprise is comprehensive and in place Sexual	Go deep into the production site, check for management loopholes, and prevent the unsafe state of people and property
Check accident handling The form and operation points of safety supervision and inspection There are four main inspection forms for safety supervision and inspection of production: special inspection, factory-level inspection, workshop-level inspection, and team -level inspection. The specific operation points are as follows. Special inspection u Safety supervisors and workshop managers implement safety inspections during production safety months or before festivals u Cooperate with local government security departments to do various special inspections. Factory-level inspection u The safety supervisor conducts a major safety inspection of the workshop and warehouse once a month. The safety supervisor summarizes the inspection results and tracks and implements rectification. Supervise and jointly manage Workshop-level inspection u In order to ensure the normal and safe production on site, workshop safety officer conducts daily safety inspection, pays close attention to any abnormal phenomenon on site Pre-Security Advocacy,On-site tidying and rectification work after class On Team-level inspection u Team safety leaders should conduct safety inspections before and after the class, pay close attention to on-site safety in the class, eliminate unsafe factors in time, and report to the superior 2 , rectification of hidden dangers The rectification of hidden dangers of production is the main content and central task of the supervision and management of safety management personnel. Establishing and improving the management system for the investigation and rectification of hidden dangers of accidents, timely and effective investigation and rectification of various hidden dangers of accidents, will help reduce the occurrence of safety production accidents. have a decisive role.

Remediation measures	Operation points
Hazardous hazard investigation and rectification according to the rectification responsibility mechanism	Strictly implement the hidden dangers investigation and rectification, if there are hidden dangers in the investigation process, the responsibility system should be strictly implemented. Check the relevant regulations of the responsibility system and the accountability system, seriously investigate and deal with the
hidden danger classification and rectification mechanism	According to the degree of hidden danger, the hidden dangers are classified into A-level accidents, B-level accidents, and C-level accidents, and they are managed according to the level of authority.
Safety production hidden danger supervision Check the monitoring mechanism	Implement hierarchical supervision of accident hazards, implement rectification responsible persons, rectification time, rectification measures, etc., and establish a hidden danger rectification supervision team for key accident hazards. The superior leaders will talk to the leaders in charge of the department, and inform them of the location and harm of the hidden dangers of the accident, so that they can complete the rectification of the hidden dangers within a time limit and with high quality. The hidden dangers of accidents are summarized and classified, and the investigation and rectification of hidden dangers of accidents are reported to the main responsible persons of each department.At the same time, the quality management department
hidden danger rectification work meeting mechanism In place

. Methods for handling security risks

The handling methods for different types of security risks are also different. The handling methods for various security risks are as follows.

• The hidden dangers of each workshop should be solved by the workshop itself. If it does not belong to the workshop, the safety management department will report it to the factory or issue a rectification order to the workshop for rectification. The production department will rectify the hidden safety hazards reported by the employees within a time limit. The safety management department will issue a rectification order to the production department, and rectify the
• within a time limit. Each department receives the rectification order from the safety management department, and should arrange rectification according to the regulations. After the rectification is completed, a notice board of safety hazards shall be hung on the site, and the

shall be removed after the rectification is completed.

. Classification of safety accidents

According to the casualties and economic losses caused by production safety accidents, accidents are generally divided into four grades, as follows.

安全事故的分级

等级	分级标准
特别重大事故	死亡30人以上、重伤100人以上或1亿元以上的直接经济损失
重大事故	死亡10人以上30人以下，Or more than 50 people but less than 100 people were seriously injured, or more than 50 million yuan but less than 100 million yuan in direct economic losses
A major accident	More than 3 people but less than 10 people died, or more than 10 people but less than 50 people were seriously injured, or 10 million yuan was caused Above and below 50 million yuan for direct economic losses
General accidents	Less than 3 deaths, or 10 serious injuries or less, or direct economic losses below 10 million yuan

. Security incident handling authority

According to the level of security incidents, set up security incident investigation and handling authority, security incident investigation and handling are carried out according to authority, and the specific authority is as follows.

(1) The investigation of general and above minor injury accidents, malignant or misoperation accidents, equipment accidents, and fire accidents shall be investigated and dealt with by the internal safety management department of the enterprise according to the principle of "four do not let go". Accidents, obstacles and incidents with damages, damage to public and private properties, and economic losses of less than 100 yuan (including 100 yuan) shall be investigated, analyzed and dealt with by the department where they belong, and the handling shall be reported to the enterprise safety management department in writing; economic losses If it is more than 100 yuan, the enterprise will conduct investigation, analysis and processing.

(3) The investigation of serious injury or death accidents and major equipment accidents shall be investigated and dealt with by the accident handling team established by the Safety Management Department or the relevant higher-level departments in conjunction with the trade union .

. Safety accident investigation and handling

Safety accident should first be investigated. After investigating the cause, the accident should be handled according to the accident handling procedures. The specific handling procedures are as follows.

• The personnel at the scene of the accident should immediately rescue the wounded and protect the scene.
• The accident unit should immediately report to the competent department of the unit, and report it to the Safety Management Department
• to investigate the safety accident according to the system.The handling process needs to be supervised by the trade union organization
• Formulate corrective and preventive measures
• Appropriately handle the personnel responsible for the accident
• Educate employees in the form of accident reporting and accident analysis meetings

#Production Department# #safety management# #workshop#

This article was originally created by Fubuke, and the copyright belongs to Fubuke. Reposting is welcome, reprinting is prohibited, plagiarism, editing, and infringement must be investigated.

How to get the full content of this document in Word and PDF:

1. This resource number: 1079.

2. Follow + comment + forward, and then send a private message "information".

For more information, please click "Learn More" below.

• The hidden dangers of each workshop should be solved by the workshop itself. If it does not belong to the workshop, the safety management department will report it to the factory or issue a rectification order to the workshop for rectification. The production department will rectify the hidden safety hazards reported by the employees within a time limit. The safety management department will issue a rectification order to the production department, and rectify the
• within a time limit. Each department receives the rectification order from the safety management department, and should arrange rectification according to the regulations. After the rectification is completed, a notice board of safety hazards shall be hung on the site, and the

shall be removed after the rectification is completed.

. Classification of safety accidents

According to the casualties and economic losses caused by production safety accidents, accidents are generally divided into four grades, as follows.

安全事故的分级

等级	分级标准
特别重大事故	死亡30人以上、重伤100人以上或1亿元以上的直接经济损失
重大事故	死亡10人以上30人以下，或重伤50人以上Less than 100 people, or more than 50 million yuan and less than 100 million yuan in direct economic losses
Large accident	More than 3 people but less than 10 people died, or more than 10 people but less than 50 people were seriously injured, or more than 10 million yuan and 50 million yuan were caused The following direct economic losses
General accidents	Less than 3 people died, or less than 10 people were seriously injured, or the direct economic loss was less than 10 million yuan

. Security incident handling authority

According to the level of security incidents, set up security incident investigation and handling authority, security incident investigation and handling are carried out according to authority, and the specific authority is as follows.

(1) The investigation of general and above minor injury accidents, malignant or misoperation accidents, equipment accidents, and fire accidents shall be investigated and dealt with by the internal safety management department of the enterprise according to the principle of "four do not let go". Accidents, obstacles and incidents with damages, damage to public and private properties, and economic losses of less than 100 yuan (including 100 yuan) shall be investigated, analyzed and dealt with by the department where they belong, and the handling shall be reported to the enterprise safety management department in writing; economic losses If it is more than 100 yuan, the enterprise will conduct investigation, analysis and processing.

(3) The investigation of serious injury or death accidents and major equipment accidents shall be investigated and dealt with by the accident handling team established by the Safety Management Department or the relevant higher-level departments in conjunction with the trade union .

. Safety accident investigation and handling

Safety accident should first be investigated. After investigating the cause, the accident should be handled according to the accident handling procedures. The specific handling procedures are as follows.

• Personnel at the scene of the accident should immediately rescue the wounded and protect the scene.
• The accident unit should immediately report to the competent department of the unit, and report it to the safety management department
• Investigate the safety accident according to the system, and the handling process needs to be supervised by the trade union organization
• Develop corrective and preventive measures
• The accident is responsible for the accident The responsible personnel shall handle it properly.
• Educate the employees in the form of accident notification and accident analysis meeting.

#production department# #safety management# #workshop#

This article was originally created by Fuboke, and the copyright belongs to Fubo. Booker, welcome to forward, reprint is prohibited, plagiarism, manuscript washing, infringement must be investigated.

How to get the full content of this document in Word and PDF:

1. This resource number: 1079.

2. Follow + comment + forward, and then send a private message "information".

For more information, please click "Learn More" below.