During the construction process of the construction site, you will see cans of concrete being sucked into the construction site. Some cement trucks will solidify in the tank truck after waiting for a long time.

House in modern houses are houses with concrete structures. During the construction process of the construction site, you will see cans of concrete being sucked into the construction site. Some cement trucks will wait for a long time and the concrete will solidify in the tank truck. What should I do if the concrete solidifies in the car? Do you know

Concrete solidifies in the tank is called "stuffed can". Generally, drivers are afraid of this situation and will try to avoid this situation. There is a spiral belt in the tank. When the tank truck rotates in the front direction, the concrete is stirred to prevent condensation. In the opposite direction, the concrete inside the concrete is released.

Generally, there is a water tank on the car. Once it is about to condense, water will be put in and diluted so that the concrete will not harden. Secondly, the vehicle will only be canned when it is out. After it comes out, each vehicle will be positioned. The mixing factory will always pay attention to the vehicle's condition. If an accident occurs, there will be an empty car to pick it up.

And even if the vehicle is turned off, the tank body can be rotated through artificial operations. The price of concrete is much cheaper than the tank body, so if it really doesn't work, the driver would rather choose to give up the concrete in the tank and dump it on the side of the road to clean it.

Therefore, there are not many cases of "stuffed cans" generally, which are mostly caused by car accidents. The "stuffed cans" cannot be cleaned in time in the future. Only manual cleaning will be carried out in the later stage. After people climbed in from the can, they used an electric hammer to break it out bit by bit. Since the concrete sets faster, it is generally difficult to clean it in the later stage.

The price of cleaning is different in each place. In some places, cleaning a can, which is about nine square meters or twelve square meters, it costs more than 10,000 points in total, in some places it is more than 8,000, and in some places it is more than 20,000. Sometimes, artificial electric hammers cannot be cleaned and the tank body needs to be cut, which will cause the greatest damage to the cylinder after cutting. The strength of the later welding of

is definitely far less than before, so all the drivers and masters should be careful to sail the ten thousand-year-old ship.