no prize betting! Guess who this is!
Does it feel like a domestic star? This one is more like it!
The answer has been announced, it is Gao Yunzhen, who was once called a plastic surgery template. Do you still remember this picture? It is widely circulated and there are almost no plastic surgery traces seen.
Look at what it is now, I should have experienced a lot in the middle.
made Yang couldn't help but think of the video of her face breaking down before.
It looks like facial filling has not recovered yet, and it is also very likely that I have done multiple projects at the same time, and the whole face is very swollen.
But fortunately, the outline and facial features are still online.
So sisters know, must separate different projects and avoid the recovery period, otherwise such problems will be easily caused.
Today, Xiao Yang will arrange a wave of recovery period for medical beauty project. It is full of practical information, be sure to collect it~
First classify medical beauty projects
epidermal layer: acid brushing, Haifeixiu, hyaluronic acid import, etc.
photoelectric category: photon rejuvenation, ultra-picosecond, Fotona4D, etc.
injection category: hydroptical needle , hyaluronic acid, collagen, hi body, botulinum toxin , etc.
radio frequency: Thermog , Heat Lattic , etc.
ultrasonic class: ultrasonic cannon
Let’s take two major projects out and say separately: linear engraving, facial fat filling
☝️A small science popularization: epidermal layer project is equivalent to awakening your little face. If you want to do it, you must put it in front of .
same category project interval
optoelectronics projects (photon skin rejuvenation, picoseconds, ultra-picoseconds, Fotona 4D, etc.)
General photoelectric projects will not cause obvious skin damage, and the recovery period is short.
However, due to deep tissue changes, it takes a period of time to promote collagen regeneration and tissue tightening, excessive frequent treatment may cause damage, , so the interval is recommended to be no less than 1 month.
If the burst mode of the picosecond project is operated, it will cause obvious skin lesions in , resulting in skin scabs, and should be separated by 3 months or more.
Injection items (water light needle, botulinum toxin, hyaluronic acid, etc.)
The lamb here takes water light needle , because water light needle is generally only injected on the superficial surface of the skin, which will cause all-round superficial skin lesions.
If you choose
If hand-in-hand water injection is recommended to wait until the local wound is restored before other projects. Since the hand-in-hand method is more than the injection volume of machine-in-hand, the interval between can be extended to 3 months.
If the injection area overlaps, the items that prohibit massage should be placed behind.
For example: If facial hyaluronic acid and facial muscle toxin are injected at the same time, you must first perform a deep hyaluronic acid filling that needs to be kneaded and then perform a botulinum toxin injection.
Large-scale anti-aging: RF project (thermage, Thermagi)/ultrasound project
thermage: Because the therapeutic energy and deep heating are relatively low, most of them are done according to the course of treatment to achieve better results. 4-6 times a year, and the interval does not exceed 2 months.
Thermagi: Thermagi: Thermagi is higher than thermagi, and the local collagen regeneration cycle is also longer. If you do thermagi for the first time, will be performed at least twice within the first year, with the interval between 6-8 months. If the treatment is maintained at least once a year after
, the interval can be between 8-10 months.
Ultrasonic cannon: 1-2 times a year, each time is more than 3 months apart
Interval periods of different categories of projects
optoelectronics project VS injection project
Photoelectronics project first and then inject: Injection project can be carried out on the same day.
For example, photoelectric, water light needle, botulinum can all be performed on the same day.
But Xiao Yang gave me a suggestion. The photoelectric and injection projects on the same day are . You can build your skin on the overall health.
If there is inflammation or allergic to the deep or superficial skin , it is not recommended, because medical beauty projects will still cause burden on the skin barrier~
first injection and then photoelectric: after injection treatment at least 1 month interval and then do photoelectric projects.
Because the photoelectric treatment of deep layers of may accelerate the degradation rate of the injection of drugs , so you must wait until the drug is as stable as possible in the skin before doing it.
Like the main component of water light needle is hyaluronic acid, and the level is the superficial layer of the skin. The heat of the photoelectric project can easily affect this level. The thermal effect will accelerate the decomposition of hyaluronic acid, causing the effect of water light needle to disappear at an accelerated speed.
(In other words, if you do the photoelectric project immediately after injection of the water-optical needle, the dissolution speed of the injection drug will be accelerated and the money will be spent in vain.)
optoelectronic project VS RF/ultrasound project
Photoelectronic first and then RF/ultrasound: 1 month later
1RF/ultrasound and then photoelectric: It is recommended to have a minimum interval of more than 1 month. Wait for the large-scale anti-aging project to stabilize the effect before doing it~
Injection project VS RF/ultrasound project
If it is RF/ultrasound, theoretically, water needles or botulinum toxin can be injected on the same day.
But! Theory is a theory, and reality still depends on one's own situation.
For example, just after the Thermagie is done, you can then do a water-light needle. Because the Thermagie treatment itself will cause a lot of dehydration in the skin, and the water-light needle can just improve the water retention ability of local skin. One plus one is greater than two~
But if it is a contour injection of hyaluronic acid/botulinumi, it is not recommended to do it immediately!
Because high-temperature radiofrequency projects generally have swelling or recovery periods, as well as the time when collagen is reconstructing, after the Thermogie takes effect, it can better help doctors choose the appropriate injection dose and location.
So the lamb recommends filling injection at least 3 months after the Thermogie is done.
If it is First do shallow injection projects, such as water light needles, it is best to do radio frequency projects after 1 month. If hyaluronic acid is injected with
Facial large-scale project interval
line carving
Lang first explains the line carving here: Regular hospital + professional doctor Operating line carving is a good way for big sisters to fight aging. Even the queen of the past did line carving before the Spring Festival Gala.
So 1. There is no need for young girls to do 2. Compliance and legality are the most important! The principle of thread engraving is to use physical absorbable lines like ropes to restore facial tissue that has a slack and displaced as aging to its original position.
The interval between the thread engraving itself is 3-5 years before it can be done next time.
For minimally invasive medical beauty projects such as thread engraving, must be completed after the recovery period of 3-6 months before the sheep suggests to do light medical beauty projects (such as Thermage, Photon).
Individual Deep high-energy medical beauty project (such as ultrasonic cannon) requires a longer interval, and takes more than 8 months.
For projects like Water-light needle , can also be operated after the 2-week recovery period. Don’t worry about whether it will truncate the line inside, because it is not the same level at all~
Facial fat filling
This picture is very clear. The left is the depression caused by tissue atrophy, and basically fat filling can be solved. The right is basically the local slack caused by loose facial tissue, which can be solved by thread engraving.
More and more babies are starting to like filling the fat on the upper part. After all, their fat is safer and longer in terms of rejection and presentation effects. The only disadvantage is that it requires filling in a small amount of multiple times to achieve the perfect effect you want.
fat injection interval is the same as thread engraving. After experiencing a complete recovery period, about 3-6 months, after the location and regeneration of local fat are basically stable, you can consider other light medical beauty projects~
