chassis is often the most appropriate accessories in daily computer assembly, because players spend more energy and budget on CPU and graphics card . The budget left for the chassis is limited. After the appearance is decent and the basic demands of installing other accessories meet the standards, the chassis is selected. In fact, when purchasing a chassis, in addition to appearance, the material, compatibility, heat dissipation, etc. of the chassis are all knowledge points that need to be considered. I happened to have a new chassis called Power Train Titanium 3080, which I shared with you through actual installation tests.
product unboxing
directly skip the product outer packaging ( kraft paper material, the overall design is relatively simple, mainly the product name and main selling points introduction), look at the chassis body. From the naming of Titanium 3080, it can be confirmed that this case should be designed for RTX30 series graphics cards that have high requirements for heat dissipation and cabinets, which can be said to be very down-to-earth.
The front face of the chassis is made of ABS plastic material, and the overall design is made of white and gray, which has a high recognition and good texture. Large-area cooling mesh can effectively ensure the air inlet of the chassis, and at the same time it can better show the lighting effect of the RGB fan. In addition, there is an RGB light strip design on the side. =
It should be emphasized that the front face adopts a quick disassembly design, and whether it is a fan or a cold row, it is very friendly to players.
The logo of the power train at the top of the front face is relatively low-key
on the left side of the chassis is designed with high transparency tempered glass , with dual insurance for magnetic suction + screw fixing, which can effectively prevent falls. There is also a handle on the upper part of the tempered glass to facilitate removal of the lower panel.
There is also a thoughtful air inlet design in the joint between tempered glass and the chassis, which can effectively enhance the air inlet effect
On the right side of the chassis is the entire SPCC steel plate, but there are many triangle heat dissipation holes below
There is a 12cm fan position above the rear of the chassis, and below are 7 horizontal pcie slots. In addition, there are three vertical pcie slots, which facilitate players to achieve vertical installation without using the graphics card bracket.
chassis also has a large area of cooling mesh on the top of the chassis, and the triangular opening design ensures the air duct at the top of the chassis. The configuration of dustproof network can effectively prevent dust absorption. In addition, judging from the screw hole position, the top of the chassis can support a maximum of 280mm cold-ship installation. The chassis I/O panel is also located at the top of the chassis. In addition to the power supply, restart buttons and audio input and output ports, there are also RGB lighting switching buttons on the front face of the chassis. In terms of interfaces, there is 1 USB3.0 interface and 2 USB2.0 interfaces. It’s a bit regrettable not having a C port, but considering the price of the chassis itself, it’s normal.
The bottom of the chassis adopts four heightened foot pads, and there is a special cooling mesh at the power chamber, which can effectively ensure the heat dissipation at the bottom of the chassis.
chassis measurements are 415*230*472mm, which belongs to the mid tower wide body chassis. It can support the installation of EATX-specific motherboards, and it can be backwardly compatible with other motherboards of . As for graphics cards, this case can support up to 340mm long graphics cards, which means it can basically be compatible with most 30 series graphics cards on the market. The wide-body design increases the height limit of air cooling of the chassis to 180mm, while the water cooling is compatible with 360 cooling radiators and below specifications. Overall, this is a particularly mountable case.
chassis can support up to 8 12cm cooling fan installations, and with abundant cooling mesh, it can provide an excellent cooling environment for the accessories in the chassis. There are 2 fan positions on the top of the power bank, which can create better cooling conditions for the graphics card when the graphics card is installed normally.
There is sufficient backline space left on the back of the chassis, and the line buckle makes players more relaxed and beautiful. In terms of storage expansion, the chassis is equipped with 2 2.5-inch SSD disks and a removable 3.5-inch HDD hard disk cage.
is installed in progress
always installed Intel platform , I am going to change my taste this time, and I invited the 5600X that I had eaten for a long time again. 7nm process, 6 cores and 12 threads, basic 3.7GHz, acceleration frequency 4.6GHz, total L2+L3 cache is 35MB, and only 65W TDP. Overall, it is also a very good AU.
motherboard is MSI B550 TOMAHAWK motherboard, and there is no need to say about cost performance. This is a standard ATX motherboard , 10+2+1 phase 60A power supply design, CPU power supply 8pin, dual M.2 high-speed solid-state hard disk interface design, 4 memory slots, can support memory above 4000MHz...
hard disk, it is a 1T yingchiqing M.2 solid-state
chassis pre-installed copper columns are MATX-specific motherboard screw bits, so before installing, you need to lock the copper columns required for the ATX motherboard, and then lock the installed CPU and solid-state motherboard into the chassis.
In fact, the 5600X itself has limited power consumption. An ordinary air cooling can handle its cooling needs, but today I want to install a white water cooling, so the final selected heat dissipation is the new product of the overclocked Sanling Mirror series CX360 ARGB WHITE water cooling.
water-cooled head cover uses an all-aluminum shell, and there is a circle of RGB lighting strips on the side. On the top is a full screen that supports ARGB, and the middle is inlaid with overclocking three logos, which can support the synchronization of the magic light of four major boards, and the mirror can rotate 360°. The copper bottom is designed to use CNC processing , which is smooth overall to ensure its contact heat dissipation efficiency. The water-cooled pipe interface is designed left and right, and the power supply and ARGB cable are designed in the middle. It is actually a bit underused when used with 5600X, but it is not bad for long-term use.
front chassis supports 360 water cooling, the fan blows to the cold line, and finally install the following
Lock the cold head, install Xingyao D4-3600 8G*2 memory
Graphics card, I chose the Yingchi RTX3070 Xingyao OC Yongjie Wujian Customized Edition, which was bought for a good price a while ago, with excellent appearance and performance. You can easily control horizontally or vertically. In terms of power supply, today the installation was to choose a 750W Antiac HCG750 gold medal full module power supply, which supports 10 years of free after-sales replacement.
In terms of the power consumption of the whole machine, a 550W power supply should be the best cost-effective choice. On the one hand, I don’t have that small power supply in my hand, and on the other hand, if I consider the upgrade space, I will still choose a larger capacity power supply.
Antiac has been deeply engaged in the field of electromechanical and electrical for 35 years. It can be said to be an absolute old-fashioned manufacturer. Its HCG series power supply belongs to the high-end series, not only has 80plus gold certification, but its actual conversion is close to platinum power supply. In terms of capacitor , we also chose a luxury capacitor configuration for all-Japanese systems, which has guaranteed stable operation. The commonly used full-bridge LLC resonant + active FPC + synchronous rectification + DC-DC, which is commonly used in the gold medal power supply, should be said to be very mature and guaranteed at the moment.
I have used the white module cable I have collected for a long time, but because there are too many ARGB fans, I still have to appear a lot of black cables. The backline is a bit messy even when I remove the hard disk cage, but I really tried my best.
whole machine displays
in the unfacial state, the collision between black and white, and the overall texture is also very good. Switch the horizontal/vertical graphics card to the horizontal/vertical installation at any time, there is always one that can satisfy you.
illuminates the host, regardless of details or overall, whether vertical or normal horizontal installation, the RGB lighting effect is very cool.
Multi-angle desktop effect display
Overall machine performance test
Verify the whole machine configuration
starts the Lu Master running score test, the whole machine scores 147W, a mid-range main e-sports host
intelligent OC status, conducts CPU-Z test on 5600X, single-core score 652.4, multi-core score 5000.2
room temperature 28°, the environment inside the chassis, single-baked FPU test, roaster time 30 minutes, the maximum temperature of 5600X is stable at around 75°, and the power consumption is around 110W.
tested the graphics card. In the TS test project of DMARK, the graphics card score was 13582
FS test project, the graphics card score was as high as 34575
Port Royal ray tracing test, the graphics card score was also as high as 8261
In the same case, the graphics card was copied and tested. In the 15min oven, the graphics card temperature finally stabilizes at around 64°, and the power consumption is around 240W. It is becoming more and more friendly to computers in winter. Of course, it is also said that the card itself has excellent heat dissipation and the case cooling environment.
K resolution, the highest DLLS is turned on, and the highest ray tracing is also turned on. The average frame rate of the 3A masterpiece "Tomb Raider" can reach 147FPS (the NV update has been very strong recently, and the average frame rate of this game has increased significantly)
The same 2K resolution, super high picture quality, " War Machine 5 In the game ", the average frame count of the game can reach 104.3FPS
"Watch Dogs Legion" game benchmark test, at 2K resolution, DLSS picture quality mode, ray tracing high special effects, the average frame count of the game 39FPS
Function playing 2K mainstream game masterpieces is basically stress-free, this is my definition of the above host.
Installation Summary
The whole machine is not pure white style, but a relatively classic black and white combination, but the final effect of the whole machine is very good, which should be undeniable. When talking about the configuration, the above host can be said to have nothing to do with cost-effectiveness, but its performance is still very good, and it is also a relatively mainstream configuration at present. At the same time, it is also proved with facts that the chassis of Power Train Titanium 3080 is not only good-looking, but also has very good compatibility with other accessories. It also has excellent heat dissipation performance and is not expensive. If it is placed in the online market, it should also have the potential to become a popular chassis product. Of course, if the RGB lighting effect on the front of the chassis supports divine light synchronization, the overall effect should be better.
