Early, cryptocurrency mining expert CryptoDonkeyMiner shared a video on the oil pipe introducing the feasibility of swiping the RTX 3090 vBIOS for the EVGA RTX 3080 Ti graphics card. It is said that other brands of RTX 3080 Ti (LHR) graphics cards can also try to swipe the same firmware, thereby achieving up to 21% improvement in cryptocurrency mining performance. But as early as December 13, 2021, foreign media reported on computing power cracking operations for RTX 3080 Ti.
Take the RTX 3080 Ti graphics cards of Dell and Alienware as an example. It is said that the ETH mining computing power after strongly swiping vBIOS can be increased by about 20 MH/s (to 110 MH/S).
Earlier, Red Panda Mining also borrowed the technical solution of CryptoDonkeyMiner, and then the Inno3D 3080 Ti iChill 3 was also attempted to call the firmware of EVGA XC3, and it was found that the computing power could be unlocked to 91 MH/s.
RTX 3080 TI HASHRATE FIX - CryptoDonkeyMiner (via)
In the latest email received by WCCFTech, CryptoMiningDonkey mentioned that he successfully unlocked the RTX 3080 Ti graphics card at hand to 110 MH/s by flashing Dell's RTX 3090 vBIOS.
Earlier on Monday, its post on the YouTube community page confirmed the applicable Dell/Alienware GPU firmware (portal). Interested friends can check whether their device ID contains the "2204" field through the GPU-Z tool software. There are also discussion posts on
[Warning] Flashing vBIOS through nvflash / HiveOS flash may cause the graphics card to become bricked/damaged (please bear the risk at your own risk).
The following is the reference command line:
nvflash64 -b backup.rom
nvflash64 --list
nvflash64 --index=5 --protectoff
nvflash64 --index=5 DELL.RTX3090.24576.210726.rom
If you are not using the 64-bit version of nvflash, please remove the word "64" in the command, and then refer to the index number in the corresponding --list.
