At present, building timber is still widely used in construction sites. However, traditional building timber generally has the disadvantage of low turnover times. Here I will tell you what are the reasons for the low turnover of building timber. 182-6518-3870The reasons for the l

At present, construction timber and are still widely used in construction sites. However, traditional construction timber generally has the disadvantage of low turnover times. Here I will tell you what are the reasons for the low turnover of construction timber.

182-6518-3870

The reason why the turnover rate of wooden square is not high is:

1) There is no market survey on the material. Purchased wooden formwork of substandard quality.

2) No pre-job training is provided to workers. Improper operation is also a major factor causing damage to the wood

３) There is no template combination design.

４) The cross-sectional dimensions of wooden keel are inconsistent. There are large errors when the manufacturer leaves the factory and when operating on the construction site.

5) The templates are not numbered.

6) The support spacing does not match the plan.

7) It is easy to be damaged at the prying point.

8) Do not clean the template after removing it, and do not apply release agent.

9) The edge sealing paint is not applied and the double-sided tape is not pasted.

10) Stacked randomly without protection. Especially in summer, humidity, rain, and exposure to the sun will have a negative impact on the template and reduce its service life.

Let’s talk about a new type of composite wood cube that is currently popular on construction sites. The surface of this composite wood cube is wrapped with a layer of polymer water-free material, which is corrosion-resistant, waterproof, moisture-proof, fungus-proof, insect-proof, and mildew-proof. It is high temperature resistant, wear-resistant, acid and alkali resistant, impermeable to water, and can be stored with confidence. The processing size is standard, and the length can be customized according to construction requirements, avoiding the problem that traditional wooden cubes need to be re-cut according to construction requirements. The static bending strength of new composite timber cubes is as high as 94 MPa, which is much higher than that of traditional wooden cubes. The usage interval can be appropriately widened, saving about 30% of materials and greatly reducing material costs.

182-6518-3870