range hood is a necessary appliance for home decoration. How can you choose a range hood that suits you and is cost-effective? All the doubts, the editor will help you answer them one by one today! Remember to share it with friends in need! ~
Side suction VS top suction
Choose the range hood, is it better to suck side or top suction? In fact, each has its own advantages and disadvantages. Here I will list the advantages and disadvantages and choose according to your needs!
side suction range hood
Advantages:
1. Small space occupied: For side suction range hood, it does not occupy too much space. In addition, since it is installed on the side, it will not cause you a depressing feeling.
2. High oil absorption efficiency: Since the side-sucking range hood is closer to the stove, it can be sucked away faster when the oil smoke is generated. At the same time, the side-sucking range hood is also more environmentally friendly and generally no residual smoke is left.
3. Flue fume separation: The fume separation plate in the side-sucking range hood completely solves the problem of difficult to remove the fume when cooking with high heat on the top cooking. The fume separator is used to effectively separate the range hood, which increases the service life of the fan, and more effectively achieves the fume cleaning effect.
Disadvantages:
1. When the power of the side-sucking range hood is high, it will affect the fire source, and the noise will also be relatively high.
2. The price of side-sucking range hood will be more expensive.
top suction range hood
Advantages:
1. Good oil fume absorption effect: , especially those Chinese-style range hoods, with a deeper smoke collecting hood, so that more oil fume gathering can be gathered and discharged. For side-sucking range hoods, when the amount of fume is relatively large, the effect of fume absorption is not as good as that of the top-sucking range hood.
2. Affordable price: top-sucking range hood is a relatively traditional range hood with a more complete production chain and a more affordable and affordable price.
Disadvantages:
1. Easy to drip oil and meet: If the top suction range hood is not cleaned in time during long-term use, a lot of oil will accumulate on it, making it easy to drip oil. In addition, the installation position of the top-sucking range hood is a bit "awkward", and it is easy to encounter heads when cooking.
2. Takes up a large space: top-sucking range hood occupies a large space, which is not very suitable for small-sized families.
Range hood selection points
1, air volume
air volume largely determines the smoking effect. The larger the air volume , the better the oil smoke effect!
Recommendation: ① 1-5 square meters, select the suction hood within 19m³/min
②5 square meters, and select the suction hood within 20m³/min
2, and the air pressure
2. The pressure in the flue is related to two conditions: the total number of floors and the number of floors on the floor. The higher the total number of floors, if the number of floors is high, the greater the pressure in the flue, the higher the pressure value of the hood. You can multiply the total number of layers by the number of floors you are in to get the size of a numerical value.
Suggestions: ①1-5 layers, select
②6-15 layers, select
③16-25 layers, select
③16-25 layers, select
④25-35 layers, select
00pa or above, select 00pa or above, 500pa or above,3. Check the energy efficiency mark
Be sure to choose level 1 energy efficiency, do not choose multiple levels, energy efficiency determines the power consumption in the later stage!
4, motor material
The core component of the range hood is that the motor must choose a fully sealed pure copper motor, has good dustproof performance and long service life! Semi-enclosed motors are prone to scattering and dirt, and high noise affects service life!
5, material
The harder the shell material, the better. It is recommended to choose tempered glass material, which is easier to clean! Of course, explosion-proof tempered glass must be needed!
6. Other questions
The noise of the range hood must be less than 65 decibels. When purchasing, you can also ask the merchant whether to send check valve ! The price is within 5,000! (If the budget is unlimited, please feel free to you~)
or above are suggestions on the selection of range hoods. Do you have any other suggestions for adding them? Welcome to leave a message for discussion!
