2021 N1 forklift driver exam questions and N1 forklift driver exam content

2021/08/1416:50:02 education 2714

question bank source: safety production simulation test Yidiantong public account applet

N1 forklift driver examination questions reference answers and N1 forklift driver examination questions analysis is the safety production simulation test Yidiantong question bank teacher and N1 forklift driver operation certificate has been The summary of the students who have passed the exam is relatively effective to help the students of the N1 forklift driver exam to pass the exam smoothly.

2021 N1 forklift driver exam questions and N1 forklift driver exam content - DayDayNews

1. [Multi-choice questions] The following operation methods are correct during homework (). (ABC)

A. It is strictly forbidden to use the driving motor and the oil pump motor of the battery forklift at the same time

B. The weight of the fork should meet the requirements of the load curve sign

C. No forklift is allowed To pick up the buried object, first calculate the pull-out force if necessary

D. When the double fork cannot complete the job, you can use the single fork job

2. [Multiple choice] Pay attention to () when running on a ramp. (BCD)

A, can run on any ramp

B, when running on a ramp, the load should be towards the side of the slope top

C, no U-turn on the ramp _span2

D. Do not park diagonally on the ramp

3. [Multiple choice questions] The function of the chassis of the vehicle is to appropriately convert and transmit the power of the power unit, and to ensure that the vehicle can be controlled by the driver Normal driving and operation,Which of the following systems are the main components of the vehicle chassis? () (ABCD)

A, driveline

B, driving system

C, steering system _span2 Dspan0p1span3 pspan _p3 p3 [Multiple choice questions] The "Special Equipment Safety Law of the People's Republic of China" stipulates that this law applies to the production (design, manufacturing, installation, transformation, repair), () and the supervision and management of special equipment safety. (ACDE)

A, business

B, transportation

C, use

D, test_span2

D, test_span2

span1, test_span2 p0 Multiple-choice questions] The technical measures that should be taken during the vehicle running-in period are (). (A BCD )

A, load shedding

B, speed limit

p0

6. [Multiple choice questions] "Special Equipment Safety Law of the People's Republic of China" stipulates that,() is special equipment. (ABCD)

A. Special motor vehicles in the field (factory)

B, boiler

C, pressure vessel

0 span_span1 pressure span_0 pressure 7. [Multi-choice questions] The "Special Equipment Safety Law of the People's Republic of China" stipulates that users who use special equipment that has not been regularly inspected or are unqualified shall be ordered to stop using the relevant special equipment and be fined () above (). (AC)

A, 30,000 yuan

B, 10,000 yuan

C, 300,000 yuan

8. for(). (ABCD)

A, unsafe position, posture

B, dangerous behavior, wrong action

C, violation, violation

unsafe in joint work Behavior

2021 N1 forklift driver exam questions and N1 forklift driver exam content - DayDayNews

9. [multiple choice] hydraulic system No matter the function is complex or simple, it generally has the following () basic components.(ABCD)

A, power mechanism

B, actuator

C, control element

3p, auxiliary element 10[span_

] Oil pumps with poor self-priming ability can be improved by the following methods (). (ABCD)

A, make the oil tank liquid level higher than hydraulic pump

B, use pressure tank

_p3, replace the oil pump _span_span_span_span_p2

11. [Multiple choice questions] The steering trapezoidal mechanism is composed of () and other rods. (AB)

A, left and right trapezoidal arms

B, tie rod

C, longitudinal tie rod

span _span D,

span 1_span D,

span more Question] In order to ensure the service life and working status of the battery, it needs to be (). (BCD)

A, alternate use

B, supplement with distilled water

C, gap overcharge

span 1_span D,

span 1_span D, exercise cycle charging 13 Question] When a forklift is driving at a turn, corner, intersection, crossing a narrow road, or in a workshop or warehouse,Its speed shall not exceed ()km/h. (C)

A, 10

B, 15

C, 3

3p, 20 _span2 D, 20 _p1span 2 (). (B)

A, national property

B, wounded

C, private property

15. [Special Equipment Safety Law] , The department responsible for the safety supervision and management of special equipment shall establish complete supervision and management files and () for the special equipment that has been registered for use in accordance with the law. (C)

A, online publicity system

B, retrieval system

C, information query system

[1span] single choice of gasoline engine compression ratio Compression ratio (). (A)

A, large

B, small

C, the same

_p3 pimg 17.

(B)

A, lifting cylinder

B, chain

1span2span _span3,

1span 18span,

1span,

18 Forklifts in flammable and explosive areas,Must be installed (). (D)

A, tweeter

B, warning light

C, safety sign

D, spark extinguisher _span2

D, spark extinguisher 19. [Single-choice question] The higher the vehicle speed, the () the maneuverability and stability of the vehicle. (C)

A, the easier it is to keep

B, the less it affects

C, the easier it is to destroy

[1span 20, single choice] Parking vehicles are not allowed in the area within () m from the door and the fire hydrant. (A)

A, 20

B, 30

C, 40

21. [Single choice of emergency braking is necessary] ). (B)

A, swift and agile

B, gently step on

C, step on and drop

span1_span D,

span1_span2, p3p span1 Single-choice question] The electrical equipment of a motor vehicle is composed of two parts ().(A)

A, power supply equipment and electrical equipment

B, battery and light

C, battery and instrument

23, When driving, you should tighten the hand brake, (), and lock the door. (B)

A, put the reverse gear

B, cut off the power

C, put the forward gear

[ 24, the single choice can be correct] Reduce the driver's labor intensity, so as to be able to operate flexibly, correctly, lastingly and safely. (D)

A, work attitude

B, driving style

C, driving technique

3p, driving posture 25] Choose the corresponding name according to the following forklift instrument ?

2021 N1 forklift driver exam questions and N1 forklift driver exam content - DayDayNews

(A)

1 span_p3span3 pspan2, battery failure_1span_p3span, span_span_

Heat indicator

26. [Single choice] Tire specification description: 195/65R1588, where 88 means: ().(C)

A, tire width

B, rim diameter (inch)

C, load index

more than one forklift at the same time] When the truck is loading and unloading goods, the lateral distance between the two forklifts shall not be less than ()m. (D)

A、0.5

B、0.7

C、0.9

2 pspan 2 pspan 2 pspan 2 pspan2 pspan 2 pspan 2 It mainly displays the temperature of the coolant in the engine, which is generally represented by the symbol (). (C)

A,

2021 N1 forklift driver exam questions and N1 forklift driver exam content - DayDayNews

B,

2021 N1 forklift driver exam questions and N1 forklift driver exam content - DayDayNews

C,

2021 N1 forklift driver exam questions and N1 forklift driver exam content - DayDayNews

29, multiple choice [] "Special Equipment "Usage Management Rules" stipulates that in order to ensure the safe operation of special equipment, the use of special equipment should be carried out according to the type, variety and characteristics of the special equipment used (). (B)

A, regular self-inspection

B, regular self-inspection

C, non-periodic self-inspection

_span 0 , [Single-choice question] It is strictly forbidden to put all kinds of () in the cab of the vehicle.(B)

A, certificate

B, gasoline container

C, lifting equipment 31 span_span2 span 1 jacks, span_span2 span 1 jack The electrolyte of the battery is an aqueous sulfuric acid solution. If you accidentally splash it in your eyes, (). (C)

A, just rinse with water

B, go to the hospital for treatment immediately

C, rinse with a lot of water and go to the hospital for treatment

32. [Single choice] The "Special Equipment Safety Law of the People's Republic of China" stipulates that any unit or individual has the right to report to the department responsible for special equipment safety supervision and management and relevant departments that involve special equipment safety (), and the department that receives the report It should be dealt with in a timely manner. (A)

A. Illegal behavior

B. Wrong behavior

C. Misconduct

33. Single choice Approach the left side of the vehicle ahead, honk the horn and () to inform the vehicle ahead. (C)

A, turn on the fog lights

B, turn on the headlights

C, use the change of far and low beam lights at night to indicate that

s is unnecessary

_1span

_1span 34, [single choice] "Special Equipment Safety Law of the People's Republic of China" stipulates,Special equipment inspection agencies that are engaged in the supervision, inspection and regular inspection prescribed by this law, and special equipment inspection agencies that provide testing services for the production, operation, and use of special equipment shall be subject to the special equipment safety supervision and management department () before they can conduct inspections , Inspection work. (B)

A, permission

B, approved

C, certification

35, [the major difference between gasoline and diesel engine is four-stroke four-stroke ). (C)

A, with or without cooling system

B, with or without lubrication system and different starter size

C, with or without ignition system and fuel supply system changes_span2p

36, [single-choice question] "Special Motor Vehicle Safety Technical Supervision Regulations in Field (Factory)" stipulates that the daily maintenance and self-inspection of field vehicles shall be implemented by the user (). (B)

A, yard safety management personnel

B, yard vehicle operators

C, maintenance personnel _p1p

2

D, inspection personnel [Single-choice question] " Special Equipment Safety Supervision Regulations" refers to the local special equipment safety supervision and management department above the county level under the current system (). (B)

A, safety production supervision and management department

B, quality and technical supervision department

C, transportation department _p1p

D, labor department 38 [Single-choice question] When a motor vehicle is parked,Turn off the switch to cut off the power supply, tighten () to lock the door. (D)

A, gear lever

B, clutch

C, brake

D, hand brake

39 When the forklift is driving with full load, due to the continuous changes of road conditions, the longitudinal reaction force acting on the rear wheel of the forklift will change from time to time. If the reaction force is zero (the steering wheel is in a critical state in which the steering wheel is suspended), the steering wheel of the forklift will deflect It is impossible to determine the driving direction of the forklift, resulting in damage to the forklift (), or even a rollover, loss of steering control, etc. (A)

A, lateral stability

B, longitudinal stability

40, [multiple choice] when the piston is called at the top dead center, the gap above it (). (B)

A, cylinder working volume

B, combustion chamber volume

C, cylinder total volume

span [1span] (when the vehicle is turning, 41, single choice ) It can make the two active wheels rotate at different speeds, and prevent the tire from dragging due to the long distance traveled by the outer wheels. (C)

A, transmission

B, reducer

C, differential [_p1span p0 The correct point of view] ?

2021 N1 forklift driver exam questions and N1 forklift driver exam content - DayDayNews

(A)

A. Overloading

_p_span2 pspan2 pspan2 pspan

Slow speed is required for ups and downs

43. [Multiple choice] The general firing order of domestic six-cylinder engines is ().(C)

A, 1-2-3-4-5-6

B, 1-3-5-2-4-6

C, 1-5-3-6 -2-4

44. [Multiple choice] Diesel has the characteristics of (). (A)

A, not easy to evaporate, and its spontaneous combustion temperature is lower than gasoline

B, not easy to evaporate, and its spontaneous combustion temperature is higher than gasoline

C, easy to evaporate, suitable as a solvent_ span2span

45. [Multiple choice] The pressure of the diesel injection pump () The pressure of the fuel transfer pump . (A)

A, greater than

B, less than

C, equal

D, greater than or less than span1 span1 special [p_1span2span] 46 () is responsible for the assessment of equipment operators . (B)

A, safety production supervision and management department

B, market supervision and management department

C, construction department _p1p

D, labor department 47 [True/True Question] In order to ensure the safety of forklift operations,The forklift must have the necessary stability along the front and rear directions of the vehicle body. This stability is called longitudinal stability. () (√)

48. [Judgement Question] The Special Equipment Safety Law of the People's Republic of China stipulates that the Special Equipment Industry Association shall strengthen industry self-discipline, promote the construction of an industry credit system, and improve the safety management level of special equipment. () (√)

49. [True and True] pallet stacker refers to the stacking vehicle with the fork located on the inner side of the outrigger. () (×)

50. [True and True] Hydrostatic transmission vehicles usually use dual accelerator pedals as the reversing control device. () (√)

51. [True and True] internal combustion engine forklift refers to a forklift that uses an internal combustion engine as the driving power of the vehicle and the battery as the power of the working device. () (×)

52. [True and true] side forklift refers to the forklift is located on the side of the forklift, the forklift mast, lifting mechanism and forks are located in the middle of the forklift, and can move along the horizontal rails. () (√)

53. [True and True] The ignition mode of gasoline engine and diesel engine is the same. () (×)

54. [Judgement Question] The approach of factories and mines should be compatible with the width of the gate of the workshop. () (√)

55. [Judgment] The personnel on duty at the accident site shall notify the relevant departments to take process measures, technical measures or other emergency measures to prevent the accident from spreading. () (√)

56. [Judgement Question] The user unit should widely publicize the emergency rescue plan, so that company personnel can understand the relevant content of the emergency rescue plan, but no drill is required. () (×)

57. [True and True] In addition to the use of single-row sleeve roller chains on small-tonnage forklifts,Disc chains are more widely used on forklifts. () (√)

58. [True and True] Before the truck is stored for a long time, an appropriate proportion of antifreeze should be added according to the lowest ambient temperature. () (√)

59. [True and True] charging methods are divided into two types: constant current and constant voltage. () (√)

60, [True and True] The speedometer is used to indicate the speed of the yard vehicle and record the mileage. () (√)

61. [True/Dictionary] The mechanical steering system completely relies on the driver's physical ability to control the steering and overcome the steering resistance torque. () (√)

62. [True/True] When a vehicle is towed by a motor vehicle, the vehicle being towed shall be manipulated by the official driver, and a "watch out for danger" sign shall be set in an awake place. () (√)

63, [True and right] The vehicle instrument is the interface for information exchange between the vehicle and the driver, providing the driver with necessary vehicle operation information, and is also an important basis for maintenance personnel to find and troubleshoot . () (√)

64, [True and True] The power source of the field car can be divided into liquid fuel and gaseous fuel according to its physical state. () (×)

65. [True and True] When the driver is overly fatigued, the vehicle can be driven at a low speed. () (×)

66. [True/True] Only (required) precautions are in place When the vehicle is refueling, it is not necessary to turn off the engine. () (×)

67. [True and True] The forklift stops before reaching the stack,Check the height of the fork before entering the fork. Without perfect technology, do not adjust the height while walking, or directly fork without stopping the vehicle. () (√)

68. [True/True] When the forklift enters inflammable and explosive places, the exhaust pipe must be equipped with a spark extinguisher to prevent sparks from splashing and causing fire. () (√)

69. [True and True] When the forklift is driving, the lowest point of the goods should be about 200-300mm away from the ground, and the distance from the fixed objects on the road should not be less than 0.5m. () (√)

70, [True and True] safety valve is used to prevent system overload. () (√)

71. [True and True] Before the vehicle drives onto the transition board, the driver does not need to ensure that the transition board is installed in accordance with regulations, is safe and reliable, and has sufficient load-bearing capacity. () (×)

72. [True and True] braking performance is the ability of the forklift to decelerate and stop quickly. () (√)

73. [True/True] Forklift trucks must pick up the goods in a balanced and stable manner, and the binding must be firm. () (√)

74. [True and True] When a vehicle enters and exits the workshop and warehouse gate, the vehicle entering the door gives way to the vehicle leaving the door. () (√)

75. [True and True] In case of a forklift rollover, the driver should hold the steering wheel tightly and roll over with the vehicle. () (√)

76, [True and True] If necessary, non-explosion-proof battery vehicles can also enter flammable and explosive hazardous areas for operations. () (×)

77. [True and True] It’s better to have someone directing behind the car when reversing,Block pedestrians or vehicles passing by. () (√)

78. [True and True] When parking on a motor vehicle lane, park on the right side. The distance between the wheel and the edge of the sidewalk should not exceed 30cm. The sequential parking distance should be maintained at least 2m and cannot be parked side by side. () (√)

79. [True and True] The stability of vehicle driving depends only on the turning radius of the vehicle and the speed of the vehicle. () (×)

80, [True and True] There are factories, stacks, trees or other facilities on both sides of the road, which affect or even block the driver's lateral view distance, without affecting the driving of oncoming vehicles , The vehicle should try to drive in the middle of the road in order to deal with the situation. () (√)

81, [True and True] The quality of the new forklift must be good, and there is no need to check the safety devices and other parts before use. () (×)

82. [True and True] The maintenance of a vehicle is a preventive maintenance and repair work. () (√)

83. [True/True] Vehicle overtaking should choose a road that is wide and straight, has a good line of sight, and has no obstacles on the left and right sides of the road, and is carried out when the traffic rules permit. () (√)

84. [Judgement] The "Special Equipment Safety Law of the People's Republic of China" stipulates that the construction unit of special equipment installation, transformation, and repair shall install, modify, and modify the special equipment to be carried out before construction. The repair status shall be notified in writing to the district-level special equipment safety supervision and management department. () (×)

85, [True and True] The positioning of the joystick of multi-way directional valve should be correct and reliable, and it should not be displaced due to vibration. () (√)

86. [True and True] For mechanically driven yard cars,When parking at low gear and low speed, if the driver first step on the brake pedal, it is easy to cause the engine to stall. () (√)

87, [True and True] When cleaning the engine, the battery circuit must be cut off. () (√)

88, [True and right] "Special Motor Vehicle Safety Technical Supervision Regulations in Field (Factory)" stipulates that the forklift truck's service brake and parking brake control device can use the same set of devices. (×)

89. [True and True] When the vehicle in front is overtaking other vehicles, it can also overtake. () (×)

90, [Judgement Question] The purpose of the "Regulations for Safety Technical Supervision of Special Motor Vehicles in Fields (Factory)" is to ensure the safe use of field vehicles, prevent and reduce accidents, and protect people's lives and property. , To promote economic and social development. (√)

91. [True and True] The working device of the forklift refers to the mast lifting system, which is the load-bearing device of the forklift. () (√)

92. [True and True] The electrical components of the vehicle should be complete and working normally. () (√)

93, [True and True] Special equipment operators must pass the assessment of the quality supervision department and obtain the operation certificate before they can engage in the corresponding work. () (√)

94, [True and True] Special equipment users shall inspect and make records at least once every quarter. () (√)

95, [Judgement Question] Special equipment users must apply to the inspection agency one month before the expiration of the equipment inspection period. (√)

96, [Judgement Question] "Special Equipment Use Management Rules" stipulates that,The special equipment safety supervision and management department determines the key points of supervision and inspection for the registered special equipment according to the risk situation and the principle of classified supervision, formulates the supervision and inspection plan, and implements the safe use of special equipment in the administrative area and the energy-saving implementation of high-energy-consuming special equipment The situation is subject to on-site supervision and inspection. (√)

97. [True and True] In distress, avoid the more serious and lighter, and avoid the side with less damage or harm when avoiding. () (√)

98. [True/True] The bottom of the battery, between the surrounding area and the battery frame should generally be padded with rubber pads or wooden blocks to reduce vibration and prevent short circuits. () (√)

99, [True and True] The steering wheel is the most common steering control device for trucks, and the correct use of the steering wheel can make the truck walk along the normal route reliably. () (√)

100, [True and True] forklift brake system master cylinder deformation of the leather cup or apron will not cause brake failure. () (×)

Support accurate examination questions for N1 forklift drivers in all regions of the country, support safety qualification certificates, special operation certificates, vocational skills appraisal and other job types of exercises.

.

education Category Latest News