Solve the computer boot prompt "USB Device Over Current status detected"

After the computer is turned on recently, it cannot enter the desktop normally, and it prompts "USB Device Over Current status detected!, Sysyem Will shut down after 15 Seconds", which probably means that the overcurrent status of the USB device has been detected! ! , The system will shut down after 15 seconds, and the problem is generally caused by a problem on the USB device. So how do we solve this problem? Let's share the solution of "USB Device Over Current status detected" when the computer starts up.

failure causes and solutions

1. The USB keyboard or USB mouse has entered water, or a USB device is short-circuited, such as U disk, mobile hard disk, keyboard and mouse, USB camera, USB headset, USB extension cables and other USB devices, unplug all the USB devices on the computer host, and test whether it is feasible to start the computer. The solution to this situation is to unplug the USB devices one by one, and restart the computer to check whether it can be started normally, you can find out Which USB device is broken?

2. If the front USB interface is damaged or the desktop switch USB interface is damaged, shut down the computer, open the computer chassis, unplug the front USB cable on the motherboard, including USB2.0 or USB3.0/3.1, etc. Try a battery, take out the button battery on the motherboard, leave it for 5-10 minutes, then install it back and try it.

3. The USB module or chip of the motherboard itself is broken, and it has to be sent for repair.

The above is the solution to the computer boot prompt "USB Device Over Current status detected" shared by the installer. I hope this article can help you.