Many novice drivers will encounter a problem when they go on the road
turns? How to turn? How big a bend should you turn?

Today, Shu Shu will tell you about a
turning tips
⬇️
"Turn left big turns, turn right small turns"
Old drivers who have been driving for many years are also well aware of their knowledge


According to the " Regulations on the Implementation of Road Traffic Safety Law of the People's Republic of China ": Motor vehicles pass intersections controlled by traffic lights, they should pass according to the following regulations: When turning left, turn to the left at the center of the intersection . Turn on the turn signal when turning, and turn on the low beam when driving at night.
is shown in the blue car in the following figure⬇️

So, why do you want to turn left?
The reason is actually very simple

The blind spot of A pillar on the left is very large
When turning left, if the pedestrian or electric car on the zebra crossing happens to be blocked by the A pillar, they will always be in the blind spot and cannot see it at all. If the speed is too fast, a collision will inevitably occur.

Method: Turn left and turn
Therefore, turn left and turn left and turn
steering wheel is relatively smooth, which can not only ensure your own safety, but also reduce the blind spot of the A-pillar to the minimum , with a wider field of view, and is also easy to be discovered by other traffic participants.
"Clicking the shortcut" speed is fast and easy to "run off".
A major principle for turning is to make straight ahead. If the bend is cut too quickly, if the bend is cut too quickly, it may interfere with the straight vehicle. If the bend is driven too quickly, an accident may occur. Moreover, it is easy to compact the line and turn to the reverse lane when turning small turns.

Method: Turn left and turn
Turn big turns seems to be a little longer, but in fact, when there are many cars, you have more time to adjust your route and will not be stuffed in by many vehicles, and you will also drive safely.

Turn right and small turns, which means that when turning right, try to keep the right side of the vehicle away from the center point of the intersection, and turn with a smaller steering radius, so that after turning, you will enter the rightmost side of the straight lane.

If the right turn radius is too large
turns to the middle lane or the leftmost lane
, it will affect the passage of vehicles in other lanes

In short, drive turns
Remember "turn left big turns, turn right small turns" skills
This driving skill can increase the turn
The safe distance between the two cars
Have you learned it?

Source | Shenzhen Traffic Police
Edit | Wang Dingquan
Review | Li Keda
Producer | Guo Jinwei
Long | Press | Two | Dimension | Code | Close | Follow
Please leave the temperature of your fingertips
Let the sun hug you
Remember this is a warm official account