waypoint flight operation guide
teaching video link:
https://www.dji.com/cn/matrice-300/video's "Jingwei M300 RTK - Intelligent Inspection" video.
Detailed description: "Jingwei M300 RTK User Manual" in
https://www.dji.com/cn/matrice-300/downloads, route flight chapter.
Airport Flight Operation Guide
(1) Enter the DJI Pilot App route flight interface to create a route, and select Create a flight mission. In the map interface, click and drag to adjust the measurement area range, click the "+" sign in the middle of the route to add waypoints.
(2) Set route parameters:
A. According to the lens size (taking 35mm as an example), set the camera to "Zenmuse P1 (35mm)".
B. Select as the Belt or Route.
a. Air belt: Set whether to operate according to a single route, and whether to expand left and right at the same time, the distance of left and right outward expansion and the cutting distance of the air belt.
b. Route: Set whether to include the center line, flight altitude, takeoff speed, route speed, whether to enable edge image optimization, photo mode and complete actions. Recommended partial parameter settings of
: Heading overlap rate is 80%, sideways overlap rate is 70%.
(3) Click to save the mission, click to upload the route and perform the flight mission.
(4) Turn off the power of the aircraft after the flight mission is over. Through the playback button of the APP flight interface, you can quickly check the captured photos or take out the SD card of P1 and connect it to the computer, and you can check the captured photos and generated files.
tilt photography operation guide
(1) Enter the DJI Pilot App route flight interface to create a route or KML import, and select Create tilt photography task. In the map interface, click and drag to adjust the measurement area range, click the "+" sign in the middle of the route to add waypoints.
(2) Set route parameters:
A. According to the lens size (taking 35mm as an example), set the camera to "Zenmuse P1 (35mm)".
B. Set the pitch angle (tilt), flight altitude, takeoff speed, route speed, and complete actions.
C. In the advanced settings, set the side overlap rate, heading overlap rate, side overlap rate (tilt), heading overlap rate (tilt), main route angle, margin and photo mode.
(3) Click to save the mission, click to upload the route and perform the flight mission.
(4) Turn off the power of the aircraft after the flight mission is over. The playback button of the APP flight interface can quickly check the captured photos or remove the P1's SD card and connect it to the computer to check the captured photos and generated files.
