Is it okay to use ordinary brackets to catch big fish? How to choose a big fish stand? What does a qualified large object stand look like? Today we will solve this problem together. A few days ago,
shared with you a relatively cost-effective BETTLE Taiwan fishing bracket, and the feedback was good. During this period, several fishing friends asked me: Is this kind of bracket suitable for holding 7.2 or even longer rods? Is it okay to use it to catch big fish? I told them bluntly: Not good.
Because the center of gravity of a relatively long pole is forward, and the weight of a pole used for fishing large objects is relatively large, the ordinary Taiwan fishing bracket has a thin rod body and limited load-bearing capacity. When the load is overloaded, it will inevitably bend and deform. , sagging or even damage. Even if it can barely support those long poles and large poles, it will bring great inconvenience to fishermen.
For example, I have the experience of using an ordinary bracket to catch large objects. It is a 6.3 giant rod with a dead weight of about 500 grams. After putting the fishing rod on an ordinary bracket, the waist is obviously slumped, and the back hanger cannot even cover the rod body. You have to hold the fishing rod with your hands all the time, so forget about the awkwardness.
Therefore, there are specialties in the industry. If you are using an extra-long rod or a large rod to catch big fish, it is better to choose a large support. When selecting
, at least the following four conditions must be met:
1. The length after scaling cannot be too short, and it must start at least 2.1.
2. The pole body should not be too thin. Thin supports will inevitably cause the waist to collapse.
3. The pole arm cannot be too thin. If it is too thin, the load-bearing capacity will be poor.
4. The bracket head and rear hanging opening should be large. Generally, the bracket head is not suitable for large poles.
So how to choose? Just talking about it without practicing the fake handle, today I will share with you a thick version of the big object bracket that our fishing gear store has received good feedback from.
is a large stand that I selected after more than half a year of careful selection. It is produced by a regular brand manufacturer that specializes in making stands and copying nets. The length of the
bracket is 2.7 meters after expansion and 1.1 meters after contraction, and the total weight is 300 grams. The most prominent feature is the bold and reinforced design, with a first diameter of 23 and a primary diameter of 27.
Made of high carbon material, the rod body is stiff and light. High-end hot stamping painting, elegant and beautiful. Even with 12-meter or 13-meter large long poles, large poles, and giant poles, it can be easily handled without sagging.
Its details are well done. Let's look at it from the beginning. Look at the bracket head first. The bracket head is a large-sized metal bracket with a large opening, which is convenient for us to set up a relatively thick and large object pole. The side is a porcelain lining, which can protect our rod body well. There is also a roller installed at the bottom of the
bracket, which facilitates us to draw and send the rod back and forth, further reducing the friction between the rod body and the bracket. At the same time, this small roller also has a luminous effect and will glow at night, making it convenient for us to quickly place the fishing rod on the stand at night.
Looking down, the bracket connector is made of hardcover metal with eight wires. The wire holes are interlocking, which is strong and durable. It can be fixed firmly with a little force and will not easily turn around. There are two exquisite fastening positioning screws below
. By adjusting these two screws, we can easily adjust the telescopic length of the bracket. When we are fishing for small fish, we can keep it shorter. When using a long pole or a large pole to catch big fish, you can extend it longer. The following
is a reinforced automatic rear hanger, which automatically adjusts the orientation with one click. For example, when we use it, we can easily rotate the rear hanger by pressing this button. When you adjust it to the position you want, just let go and it can be fixed, which is simple and practical.
An anti-slip fixing gasket is added to the part where the rod body is connected. After being fixed with screws, it can play a very good anti-loosening and slipping role, so you donāt have to worry about the hang-up hanging loosely.
In addition, the length and direction of the back hanger can be adjusted freely, and the opening is made large enough to easily accommodate the handle of a large fishing rod. At the same time, there is a luminous anti-slip padding on the inside, which cooperates with the luminous function of the bracket head to facilitate quick positioning of the fishing rod at night.
Because this bracket is thickened, a rear tail pipe is specially designed at the rear end of the bracket.Screw this reinforced rear tail pipe to the rear end of the bracket, and it can be easily installed on our fishing box. The solid rear tailpipe of
adopts a micro-prismatic design, which can better match the fishing box accessories, fix it more firmly, and truly achieve anti-rotation, anti-shake and anti-sway. The overall impression of the
bracket is that it has a carbon pole body, thickening, light and hard without slumping, excellent workmanship, pressure-resistant construction, and every detail is taken care of. If you are worried about not finding a suitable stand for this kind of big man, you can also come to me.
I am a peer, you can also call me a peer. I regularly share good fishing gear and practical fishing skills. Follow me and we will continue tomorrow.
