Coal slime dryer Abnormalities in all aspects of design, processing, installation and debugging, and operation will affect the overall performance of the system. The editor of this content focuses on the precautions when using the coal slime dryer to improve the stability and drying efficiency of the entire production line.
1, coal slime During the drying process, you should ensure that the materials are fed at a uniform speed and in an even amount, and do not feed too much or stop for too long.
2. Fuel: The coal used in the furnace of this dryer equipment should be above 6,000 kcal.
3, boiler : Maintain the appropriate temperature, add coal frequently, burn coal thinly, clean the slag at the right time, and add coal at the right time.
4. Check whether the dryer, conveyor and each connecting screw are loose, and whether the belt tightness is normal.
5. Regularly clean up the materials falling from the joint between the conveyor and the dryer furnace during work.
6. Check whether the belt of the belt conveyor is deflected and whether the joint connection is intact. It should be adjusted and repaired in time.
7. If the fire is not completely cleared and extinguished at night, someone must be on duty to prevent the fire from igniting and damaging the equipment.
8. Mechanics should add butter and engine oil to each component in a timely manner, regularly check whether there are any abnormal sounds in each machine, and deal with them promptly if found. Regularly check whether each part is missing. If missing, make up for it in time.
