With the construction and commercialization of 5G, it is expected that within three years from 2019 to 2021, communications (communication equipment) and automotive electronics are expected to become new driving forces to drive the development of PCB industry. In fact, while 5G brings opportunities to the PCB industry, it also puts forward higher and stricter requirements for technology, and its indicators in terms of speed, integration, heat dissipation, frequency, and multi-layering are much higher than 4G.
Due to the high-frequency microwave characteristics of 5G, the base station density is higher than that of 4G base stations. At the same time, the processing frequency, data transmission and processing speed of various devices are much higher than that of the 4G era. These core main equipment, transmission equipment, antenna/ RF equipment put forward very high demands for high-frequency high-speed boards. It is mainly reflected in four major aspects:
1) The structure and function of the base station radio frequency units and antennas have undergone major changes, mainly manifested in the increase in the number of of the RF unit channel (8 channels rise to 64 channels), corresponding to the increase in the area of the PCB; the structural form of the RRU and antenna units of the 4G base station equipment has become a 5G AAU structure (with RRU and antenna functions integrated), corresponding to the higher degree of integration of the PCB.
2) In order to achieve ultra-intensive network coverage, in addition to spectrum applications below 6GHz in the 5G spectrum, millimeter wave spectrum resources such as 28G and 39G for hotspot coverage and large-capacity high-speed transmission will be widely used. Therefore, the demand for high-frequency PCBs used by high-frequency microwave base stations will increase.
3) Under the 5G independent networking network architecture, in order to meet the technical requirements of high-speed transmission, the PCB required for data transmission equipment such as baseband units, network boards, backplanes, and servers will use higher-level high-speed copper clad material.
4) Thermal management of PCB products may be particularly important in the future. Not only are there reasons for adapting to high-frequency devices, but also the heat dissipation requirements brought by high power and high power density. For the application of new high thermal conductivity materials, special heat dissipation structural PCB requirements will emerge.
In order to capture the opportunities of PCB in the 5G era and promote the popularization of 5G terminal equipment and automotive electronics, the "6th Shenzhen International Circuit Board Procurement Exhibition" (CS SHOW 2019) jointly created by SPCA, TPCA, GPCA, CCPIT and Lizhan Expo Group will be grandly opened from August 28 to 30, and will make every effort to build "Shenzhen" to become a "global circuit board procurement center".
big names exhibitors compete on the same stage. PCB sub-industry shows its powers
As a rare professional exhibition in the domestic PCB field, CS SHOW 2019 Circuit Board Exhibition has been focusing on providing one-stop PCB/FPC procurement services for electronic manufacturing companies for many years. The exhibits cover circuit board manufacturing, circuit board production equipment and materials, environmental protection equipment and materials, circuit board intelligent automation production equipment, circuit board new materials and other fields.
As of now, nearly 100 well-known companies from various detailed fields of the circuit board industry have entered the CS SHOW 2019 circuit board exhibition. The exhibitor lineup is unprecedentedly strong. It will show terminal electronic customers the strong process strength, fast reaction speed, high-quality technical services of Chinese circuit board companies, as well as new breakthroughs and development directions in smart production of circuit boards, green energy-saving technology, new technologies, new processes, new materials, etc. The technical strength of
PCB circuit board production equipment directly determines the height of the product, and the development trend of raw materials represents the quality of the product. Exhibitors from PCB circuit board production equipment and materials such as Zhengye Technology, Ray Ting Laser, and Ted Laser attach great importance to product technology research and development and low-consumption, high-efficiency, energy-saving and environmentally friendly materials development. At the CS SHOW 2019 circuit board exhibition, these exhibitors will provide audiences with rich choices with powerful, high-quality, energy-saving and environmentally friendly technical solutions.
The rise of automotive electronics, consumer electronics, and 5G communications will drive the PCB market to continue to rise, and will also put higher requirements for circuit board production. It is expected that by 2021, the proportion of high-tech PCBs such as high-tech content such as high-multilayer boards, flexible boards, HDI boards and packaging substrates will reach 60.58%, becoming the mainstream market.
At this year's CS SHOW circuit board exhibition, circuit board manufacturers Jingwang Electronics, Oscon Technology, Chongda Technology, Xingsen Quick Circuit, Wuzhu Technology, Bomin Electronics and other industry leaders will gather in the exhibition to comprehensively display new technologically advanced and excellent quality circuit board products, covering more emerging electronic manufacturing fields.
In addition, brand exhibitors such as smart terminal manufacturers and software service providers Fangudadi, environmental protection equipment and materials exhibitors Weiluda Technology and China Construction Southern Environment will fully demonstrate the industry advantages of their respective fields at the CS SHOW 2019 Circuit Board Exhibition, thereby promoting exchanges and cooperation among industries and helping the sustainable and healthy development of domestic electronic manufacturing. By providing diversified trade matching services, the organizers of the
CS SHOW circuit board exhibition can use the exhibition platform to achieve face-to-face communication with PCB manufacturers, achieve efficient procurement docking, and enhance the visiting experience of professional visitors with the upstream and downstream of domestic and foreign industries with high standards.
At the same time, CS SHOW 2019 Circuit Board Exhibition will hold a number of high-quality special forums at the same time. Heavyweight masters from the Cross-Strait and Four Associations will visit them to directly explore the current fields, especially in 5G, communications, automotive electronics, etc., and discuss them from multiple dimensions such as industrial trends, technical solutions, and practical applications. On-site topics include the PCB industry development trend summit forum, PCB future market and technology development trend, PCB environmental protection industry safety forum, PCB cutting-edge technology expert lecture ( Bai Rongsheng teacher), which will inspire the audience in terms of intelligent circuit board production, green energy-saving technology, new technologies, new processes and new materials, and the SAE-AWC 2019 International Forum on Safety Technology of Automotive Vehicles, AWC 2019 Second New Energy Vehicle Key Components Technology Conference will gather big names such as vehicle manufacturers and first-level parts suppliers to present speeches at the same time, and release trends and technical information on the automotive electronics market. I wish you to keep up with new industry trends and seize the initiative.
Six exhibitions at the same time, creating a platform for smooth electronic industry chain
To effectively gather more diverse innovative products and advanced technologies, CS SHOW 2019 circuit board exhibition jointly with the well-known electronic manufacturing exhibition in South China "NEPCON ASIA Asian Electronics Exhibition", AUTOMOTIVE WORLD CHINA Automotive Electronics Exhibition, "S-FACTORY EXPO Smart Factory Exhibition", the new "ELECTROTEST CHINA Electronics Test Exhibition" and "AHTE Six major exhibitions including South China Industrial Assembly Exhibition were held at the same time, sharing the resources of 60,000 terminals, especially electronic product brands, original manufacturers and OEM processing, consumer electronics, communication systems, flat panel display, smart home and wearables, automotive electronics and other buyers, to create a smooth cooperation platform between circuit board manufacturers and electronics industry chain, and to meet the audience's one-stop procurement needs in PCB, PCBA/EMS, SMT, automotive electronics, automation, smart factories, testing and measurement, etc.
In addition, the organizer of CS SHOW provides diversified trade matching services to buyers in the electronic manufacturing industry with procurement intentions, bringing efficient docking to the suppliers and improving the visiting experience of professional visitors with high standards. Here, electronic manufacturing companies from all over the world can use the exhibition platform to achieve face-to-face communication with PCB manufacturers, fully complete procurement plans and expand social business opportunities.
pre-registration is in progress, and the super luxurious exhibition lineup will surely attract many "electronic people" at home and abroad to visit. The CS SHOW 2019 circuit board exhibition has opened pre-registration channels for audiences on the official website and WeChat, etc., opening up a convenient channel for audiences to visit. Visitors who have free online pre-registration in advance can also enjoy a number of exclusive benefits provided by the exhibition. CS SHOW 2019 sincerely invites all colleagues in the electronic manufacturing industry to pay attention to the new development trends of the domestic PCB industry, pay attention to CS SHOW 2019, and co-organize to create a bright future for the electronic manufacturing industry.
(Source: CS SHOW circuit board exhibition, part of the information comes from electronic enthusiasts)
CS Show 2019 pre-registration route for audiences:
Visitor hotline:
Domestic audience: 010-59339137 or 400-650 5633; Foreign audience: 86-21-2231-7073
For details, please visit:
Follow us: cs-show
