BYD may supply blade batteries to Tesla next year 4
According to Cailianshe, it was learned from many insiders that BYD will supply "blade batteries" to Tesla in the second quarter of next year. Currently, Tesla models equipped with "blade batteries" have entered the C-sample testing stage.
BYD declined to comment on this.
Last March, BYD released the blade battery to the outside world, and in July, the first BYD new energy flagship sedan, Han. The battery uses lithium iron phosphate technology. Through structural innovation, the volume utilization rate has been greatly improved, and finally achieved the design goal of installing more battery cells in the same space. Compared with traditional battery packs, the volume utilization rate of "blade batteries" has increased by more than 50%.
Luo Yonghao Hammer Company was filed for bankruptcy reorganization again
Picture source | Network
August 5, Daily Eye Check showed that Beijing Hammer Digital Technology Co., Ltd. added bankruptcy reorganization information, case number (2021) Jing01号378, the case type is a bankruptcy review case, the applicant is Xingxing Precision Technology (Shenzhen) Co., Ltd., and the trial court is Beijing No. 1 Intermediate People's Court .
It is reported that the current legal representative of the company is Wen Hongxi, and Luo Yonghao serves as the company's executive director. In addition, as early as April 9, the company was filed for bankruptcy reorganization. The case number is (2021) Jing01 Po Shen No. 120. The case type is a bankruptcy review case. The applicant is Yilianda Electronics (Kunshan) Co., Ltd. and the trial court is Beijing No. 1 Intermediate People's Court.
Hon Hai confirmed the acquisition of Wanghong 6-inch factory
htmlOn August 5, the acquisition of Wanghong 6-inch factory finally came to an end, and Hon Hai determined to acquire the 6-inch wafer factory of the memory factory Wanghong.
Wanghong Electronics sold its 6-inch wafer factory building and equipment located in Hsinchu Science Park to Hon Hai for 2.52 billion New Taiwan dollars (approximately RMB 587 million). The transfer of the transaction property rights is expected to be completed before the end of 2021.
Hong Hai is currently focusing on automotive, electric vehicles and other products, and its semiconductor layout is also the first development. Wanghong has also actively cultivated the field of automotive NOR Flash in recent years. The cooperation between the two parties will be able to deepen related layouts and expand more outlets through the Hon Hai MIH alliance platform. At the signing ceremony of
, Liu Yangwei, chairman of Hon Hai Technology Group, pointed out: "After obtaining the 6-inch factory located in Zhuke, Hon Hai will be used to develop and produce third-generation semiconductors, especially SiC power components used in electric vehicles."
Samsung Xi'an factory phase II will be completed within the year
According to foreign media Businesskorea, the second phase of Samsung Electronics China Xi'an factory is expected to be completed by the end of 2021. In the first half of 2021, Samsung Electronics invested 23 billion yuan in its factory in Xi'an, accounting for about 108.5% of the planned investment in the same period, 2 billion yuan more than the planned investment.
It is reported that Samsung Electronics is considering expanding its investment in its factory in Xi'an, and the company predicted during its performance call in the second quarter that the annual growth rate of demand for NAND flash will be around 40%, so Samsung Electronics is considering increasing investment in its factory in Xi'an from the original planned $15 billion to around $20 billion.
reported that after the second phase of Samsung factory is completed, the production capacity will be added to 130,000 pieces per month. If the data from the first phase of the factory is added, the monthly production capacity will be as high as 250,000 pieces.
Meng Wanzhou extradition case has entered its final stage
Image source | chiangraitimes.com
August 4th, according to Reuters , Huawei Chief Financial Officer Meng Wanzhou will return to the Canadian court on Wednesday to attend the last round of extradition hearing.
According to the plan, the last round of hearing is expected to last until August 20. The hearing will focus on the third part of Meng Wanzhou's argument in the early stage, especially the part that seriously distorts Meng Wanzhou in the extradition request made by US prosecutors.
The defense said the U.S. record in the case was "obviously unreliable", and Canadian prosecutors objected.
Then the hearing will enter the remedial phase, which will involve Meng Wanzhou's allegations of abuse of the procedure occurred during her arrest. Thereafter, a detention hearing will be held to determine whether there is enough evidence to allow Meng Wanzhou to stand trial. The final decision is generally expected to be made in the fall.
New H3 Zhiqing chip 660 mass production
On July 30, under , a subsidiary of Unigroup , H3 Group officially announced that the independently developed high-end programmable network processor chip Zhiqing 660 started mass production. The Zhiqing series of chips are fully commercialized and will build a complete network chip supply chain system for the domestic ICT industry and inject impetus into the construction of intelligent networks.
It is understood that Zhiqing 660 integrates 256 dedicated processors, a total of 4,096 hardware threads, supports 12 LPDDR5 controllers, contains 18 billion transistors, and has an interface throughput capacity of up to 1.2Tbps. At the same time, it has outstanding advantages such as ultra-high integration, high performance, large capacity, strong scalability, and green energy saving. It can be widely used in data communication fields such as routing, switching, security, and wireless.
Optoelectronic Holography has received tens of millions of A-level financing
Picture source | equalocean
According to 36Kr, recently, Optoelectronic Holography has completed tens of millions of A-level financing, and the investor is Shenzhen Investment Control Donghai Fund. This round of financing will be used to start R&D penetration in the semiconductor field.
Optotechnology Holography was established in 2015. It is a new optical material manufacturer, committed to the research and development and manufacturing of metamaterial films based on photonic crystal structures that are original in China and internationally advanced, as well as various advanced optical films based on composite micro-nano structures.
According to reports, the company has completed the research and development of semiconductor material and is fully expanding domestic and foreign market channels to promote the marketization of optical films and photonic crystal semiconductor materials.
Juxin Microelectronics completed a C round of financing of hundreds of millions of yuan
Recently, the simulation and mixed signal chip design company Juxin Microelectronics announced that it had completed a C round of financing of hundreds of millions of yuan. This round of financing is jointly invested by a number of well-known semiconductor industry capitals, including Xiaomi Changjiang Industrial Fund, Huaye Tiancheng (extended holdings by old shareholders), Hengxin Huaye and a top industrial chain fund in the industry.
Founded in 2016, Juxin Microelectronics is an innovative chip design company with independent intellectual property rights. With analog and mixed signal chip design as the core, it has created a good development situation where multiple product lines representing intelligent audio, 3D vision, optical sensing and tactile perception are moving forward together.
