, if the worker is "slipped" like this, please don't hesitate and change people quickly!
Decoration is a very important thing for us. The quality of decoration of
will directly affect the beauty of our home and the comfort after moving in. If the decoration is not good, then spending so much hard-earned money, the house you bought will also make people feel uncomfortable living.
When decorating, we not only need to choose better building materials, but also need to choose responsible workers.
The quality of building materials will affect the quality of home decoration, and whether workers are responsible will directly affect the effectiveness of home decoration products and the cost of decoration.
If you find that workers are "spoken" like this during decoration, please don't hesitate and change people quickly!
- All tiles use back glue
tile back glue The main function of tile back glue is to increase adhesion between the tiles and walls and floors, which can avoid hollowing and falling off of tiles, and can make the tiles more firmly bonded.
If you have a little knowledge, you will know that when laying tiles, in addition to using crushed tiles, you can also choose to use cement mortar or other methods to lay tiles.
Among these methods, tiles are the most expensive method.
If you find that all the tiles at home are laid with glue during construction, it means that the workers are not reliable and everyone should replace them in time.
Although the adhesive bonding effect of ceramic tiles is better, not all floors and wall tiles need to use ceramic tiles glue . If it is just ordinary wall tiles or floor tiles, you only need to use economical cement mortar.
Generally speaking, ceramic tile adhesive is only used for large-size or low-water absorption rate on the walls. The rest of the wall and floor tiles do not need to use ceramic tile adhesive.
If all the tiles in the house are laid with glue, it will not only require more decoration costs, but may also bring more serious environmental pollution.
The harmful gases contained in ceramic tile backing will be more harmful. If the ceramic tile backing is used on a large scale throughout the house, it will also endanger our health.
The reason why workers choose to use tiles to glue is that doing so can make them more labor-saving, but they did not consider the owner's decoration budget and the air pollution problems at home.
- putty powder add glue
Many friends may think that adding water to putty powder is a very common behavior, but in fact this method is not correct. If you find that workers add glue to putty powder when decorating, you need to be more cautious.
If we buy regular genuine putty powder, then we don’t need to add glue and can be directly mixed with water to the wall.
If workers add a lot of glue to the putty powder during construction, the formaldehyde content in the room will also increase , which will cause more serious indoor pollution, and subsequent putty powder is more likely to crack.
The reason why some workers add glue to putty powder during construction is generally due to two reasons. The first reason for
is to make the putty powder softer, make the construction easier, and the wall-mounting effect is more appropriate, so that they can solve the construction troubles themselves.
The second reason is that the putty powder brought by the workers themselves may be of poor quality, so they can only meet the usage standards by adding glue, but doing so will have a great impact on the owner.
- The first layer of waterproofing is not dry thoroughly, just brush the second layer of
Indoor waterproofing is a very important project. If the waterproofing at home is not done well, it is easy to seep water after we move in, and it is also easy to affect the neighbors downstairs.
Normal waterproofing requires two brushes. If you brush horizontally for the first time, you need to brush vertically for the second time, so that you can make the waterproofing "unprecedented".
and it is required that the second layer must be painted after the first waterproof layer is completely dry.
Some decoration workers may brush the second time when another layer of waterproof material has not been completely dry. This will easily cause the moisture in the base layer to arch upwards, destroying the upper waterproof layer, and directly affecting the waterproof effect.
When waterproofing construction is carried out, it is best for everyone to go to the site to monitor it, observe the workers' construction methods and the number of waterproofing applied times. In addition, you need to pay attention to it. You must wait until the first waterproof layer is completely dry before you can brush the second layer. After the waterproofing of
is done, a water-closed experiment is still needed. If a loophole is found during the water-closed test of , it must be repaired in time and a water-closed test is carried out again.
Summary:
If you find that workers have the above practices when decorating, then don’t hesitate to change people as soon as possible. Doing this will directly affect the quality of home decoration and our life after moving in.
[If the picture is infringed, please send a private message to delete the manuscript]
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-