is made again and again, a simple package, and a very useful package.
is this bag - a single bag with a bag, you can do it in just six steps.
Materials required for
180g glue-free cotton 2 pieces, size: 28 cm x 23 cm, two 2.5 cm square base corners need to be cut off.
的接接源 on the fabric and place one centimeter of sewing. When ironing tape and auxiliary cotton, turn off the iron steam, adjust the temperature to the highest level, and then press it. Both sides must be hot. When ironing on the fabric side, you can place a piece of cotton white cloth to prevent the fabric from being burned.
A friend asked me if the self-adhesive auxiliary cotton is easy to use? I don’t like using that kind of auxiliary cotton because when I’m in the car, the glue of auxiliary cotton sometimes sticks to the sewing needle, and the self-adhesive auxiliary cotton can easily be degummed when washed.
The main material also requires two parts of the inner part, the size is the same as the face.
strap material includes a cotton webbing and a piece of facial fabric.
Start making
Step 1 First make the strap, iron the 7 cm wide material inward for 2 cm, then cover the webbing, align the center line, and put the webbing on the two lines.
Step 2 align the face and the inner front, respectively, and there are two bottom corners on the side and bottom sides of the car.
Step 3 tucked on the car at the door of the face. First cut a 10-centimeter strap, put a buckle on it, fold the remaining straps in half, and cart them separately on the center line of the straps on both sides.
Step 4 Turn the inner part to the front, align the side seams, stuff them into the face, wrap the car around the door, and leave it back!
Step 5 . After the car is finished, we don’t turn to the front, take out the inner part, and then align the seam between the inner part and the bottom of the face bag. put the car in the sewing part, .
Step 6 turns to the front, and puts a 2mm narrow edge in the car in the bag, and the return port is sealed.
Summary
There are two points in this bag today that need to be shared with you:
1. The white webbing is topped with fabric to give the bag an overall effect, otherwise the color difference between the bag and the bag is too big.
2. Before turning to the front, the inner and the face are together. After turning to the front, the inner and face are more in line with each other. When picking up the front, the inner and face are more in line. When picking things from the bag, the inner and the inner will not be brought out.
I hope my sharing will be helpful to you. Thank you for spending your precious time paying attention to my handicrafts. Remember to help and like it, thank you!
