Due to the characteristics of the stone itself
, there are many uncertainties in the stone in the production process
For example, board surface has defects
Production process is damaged and the size does not meet , etc.
If you encounter these problems in the cutting process, how should you deal with
? 1 way to do it!
Select [Tag Exception] and perform standardized processing
1
Exception mark before cutting
(1) After the matching is completed, click [Match End] to complete the matching operation. At this time, the [Exception Mark] operation can be activated.
(2) At this time, an exception is found, you can click [Mark Exception] to select the abnormal part. Click [Tag Finish].
(3) After the exception mark is completed, the corresponding solutions on the manufacturing cloud and stone elves will also have exception marks. Stone elves can select a new large plate in the abnormal part to replenish the feed.
2
Exception mark after cutting
(1) After cut , the engineering board is damaged and the size is not appropriate. You can perform the second [Exception mark] operation.
(2) Click [Abnormal, mark], select the abnormal part, click [Tag Complete], and the corresponding solution of the manufacturing cloud and stone elves will have abnormal marks. Stone elves can select a new large plate in the abnormal part to replenish the feed.
(About the process of filling and re-planning, click:
3
made exception mark on cloud
made exception mark on cloud can also be divided into two situations: one is the mark exception before cutting; the other is the mark exception during cutting.
. The marking abnormal before cutting
When the plate is in before cutting , you can log in to the corresponding engineering project of [Manufacturing Cloud] and click on the plan to mark the exception.
Click the stone name under the label of the material to enter the detailed large plate information, select the large plate with abnormality, click to mark the abnormality, select the cause of the abnormality, and fill in the abnormal information.
Note: When the big board/engineering board state is in cutting , the big board/engineering board on the cloud cannot be marked abnormally.
. Marking exception after cutting is completed
(1) After cutting , when the engineering board is damaged and needs to be re-planned, you can select the engineering board in the large board details page of the manufacturing cloud to mark exceptions.
(2) Click the stone name under the label of the material to enter the detailed large plate information, select the engineering board with abnormality, click to mark the exception, fill in the abnormal information;
[Tag exception] It seems to be a small function
but it has a big function
It can better assist in the production of
ml0 Standardizes the production process
Avoid abnormal engineering board affecting production efficiency, etc.
So, learn it quickly~
END
*Some text and pictures in the article are from the Internet and are for reference only; we are committed to protecting the author's copyright and intellectual property rights involved, and there is no infringement of the legitimate rights and interests of any party. Reprinting or quoting is only for disseminating more information. Some materials come from the Internet. If there is any infringement, please contact us to delete it in time.
