Recently, some netizens complained: A good house was destroyed by several beams on the ceiling. They wanted to demolish it but couldn't. What should I do?
This problem has really been criticized by countless people. Then I will tell you that there are too many design techniques for , so keep it to you!
●Back-shaped ceiling
This is the most common method, generally seen in living and dining rooms, and runs across the center of the ceiling, which is really unsightly. At this time, I simply used this to surround a shaped ceiling and combined it with the beam. It not only did not get an eye-catching, but it added a sense of layering to the living room and dining room, and the style was greatly improved.
●S arc
Like the one below, after the balcony was merged, the beam left behind was too low and could not move. With a sudden inspiration, the edge of the beam extended into an S arc shape. The soft lines not only instantly weakened the presence of the beam, but the height difference was not so obvious.
●Partial ceiling + semi-circular arc
Simply put, it is divided into 2 steps, half of which is made into a semi-circular arc, and the other half is treated by layout of the ceiling to create a visual effect of varying heights, which not only achieves a gentle excess, but also has a sense of high-end feeling, and is also refreshing with the design of the masterless light.
●Suspension ceiling
directly pulls the ceiling height to be flush with the beam, like the balcony of this bedroom. Is it impossible to find it all at once? However, this method is not suitable for low-rise apartments, remember it!
●Wave shape
Some beams will exist in the aisle, and poor handling will aggravate the feeling of depression. The solution for this family in Hefei is to use wave shapes to wrap the beams.
layers are rising one after another, the lines are smooth and smooth, and they are matched with the exquisite corner flowers on the wall. The ugly beams disappear, and at the same time, they also fully exert the beauty of French style.
●45 degree oblique top
directly combines with the cross beam and extends out a 45 degree oblique angle. Not only does it not press the layer height, but the visual effect is also up to the next level, lively and agile.
●Dark paint
This is the simplest method of lintel beam . The wall paint also extends to the ceiling. It is also a good choice to weaken the beam through color.
7 methods to deal with beams in your home, there is nothing more detailed than this. Friends who like it, you can refer to it~
