Tianjin radiator introduces you to the relevant knowledge of the steel and aluminum composite radiator brand:
1. Material selection generally believes that the thicker the steel pipe, the better. The thicker the steel pipe, the less likely it is to leak. In fact, this is not the case. According to people, although some steel pipes are thicker, some are black steel pipes. Black steel pipes are steel pipes prohibited by the state and will turn black after oxidation. Regular manufacturers use tensile grade low-carbon steel, and copper-aluminum composite radiator has high corrosion resistance and high pressure bearing capacity.
2.Plastic Powder: Many consumers mistakenly think that the thicker the plastic powder coating on the surface of the radiator, the better. In fact, if the coating is too thick, the radiator can easily cause defects of delamination and discoloration during use. Therefore, when purchasing a radiator, it is best to evenly cover the plastic powder coating, colorless and smooth surface. This radiator is both beautiful and durable.
3. Profile: The internal structure of the radiator can be seen through the profile. Steel radiators generally require a layer of anticorrosion coating because water is prone to corrosion of the radiator.
Steel and aluminum composite radiator installation knowledge:
radiator cannot modify parts at will. The installation of the radiator is conducive to indoor heating and can balance air convection and room temperature. Once the parts change, the room temperature is unbalanced. On the other hand, once the pipe. The radiator moves easily and can cause a lot of unnecessary damage to the home. The area near the indoor radiator should maintain a certain indoor heat discharge space as much as possible. Dirt should not accumulate in front of the radiator or radiator, otherwise it will endanger the actual thermal conductivity of the radiator.
