With the development of society today, it is no longer a problem for people to have enough to eat and drink, and their material and spiritual pursuits are getting higher and higher. The aesthetic vision is also becoming more and more critical. Nowadays, when we are in many public places, such as large squares, high-end hotels, office buildings, etc., you can find metal decoration everywhere. The most intuitive one is the stainless steel elevator decorative panel we see when we take the elevator. The mirrored elevator car board can be used as a mirror for people to look in the mirror. The etched elevator car board has beautiful patterns, giving people a good visual experience. This is a change brought to us by the development of elevator decorative stainless steel plates.
Mirror elevator hall door renderings
The more commonly used stainless steel plates for elevator hall doors are generally mirror panels or mirror etched plates. For mirror stainless steel plates, the stainless steel 2B plate is polished with mechanical equipment that has been polished with abrasive slurry. The stainless steel plate surface becomes very smooth, and has comprehensive reflectivity, so that the reflection can be as clear as a mirror and illuminate people. The smoothness of stainless steel mirrors has a certain standard, which is measured in the unit K. Generally speaking, the effect of mirror reflection is 8K, the next level is 6K, and the higher level is 16K. The higher the K number, the higher the smoothness, that is, the better the brightness of the surface of the stainless steel plate.
To judge the quality of a stainless steel mirror panel, it mainly depends on whether there are grinding marks and blisters on the surface of the stainless steel mirror panel. A qualified stainless steel mirror panel will not have any defects on its surface. Generally speaking, when the polishing equipment is processing a stainless steel plate, the longer it runs, the more times the plate is polished per unit time, and the smoother the surface of the processed stainless steel mirror panel, the better the effect. .
stainless steel mirror panel production process: before the stainless steel plate is polished, the plate needs to be sanded
mirror elevator hall door renderings
, and then the stainless steel plate is put into the polishing equipment, in the abrasive liquid, and polished with The grinding head grinds the plate
mirror elevator hall door renderings
. Generally, the polishing equipment has 8 sets of grinding heads. If it is advanced, it can reach 16 sets of grinding heads, which has better efficiency. The processing process is not complicated. It mainly involves grinding off the oxide layer on the surface of the stainless steel plate and smoothing the surface to achieve a mirror effect. After the stainless steel mirror panel is polished, it will be rinsed with clean water and then dried to complete the entire process. After the
stainless steel mirror panel is completed, it can be directly installed in the building for use, or other processing can be performed to enrich its connotation. The common ones are mirror etched plates, which are etched with various patterns and patterns on the basis of mirror plate . Mirror color plate, the original mirror coating is colored to obtain a richly colored colored stainless steel mirror panel, including a sparkling titanium mirror panel, a calm and atmospheric black titanium mirror panel, and a chic and classic bronze mirror panel. , the spring-filled emerald green mirror panel, the stunning purple-red mirror panel, etc. We can also combine mirror etching and color plating to create more vivid and colorful artistic stainless steel plates.
Mirror elevator hall door renderings
Colored stainless steel plate can be used as elevator hall door and car decoration. This is a composite surface stainless steel elevator decorative plate, which is composed of the inner substrate cold-rolled steel plate and the outer stainless steel plate After being bonded with strong glue, it is folded into a shape that conforms to the shape of the car panel.
Processing process:
1. Material preparation: Cut the cold-rolled rigid base plate and stainless steel panel quantitatively according to the predetermined door panel size;
2. Groove creation: Use a groover to carve out a V-shaped shape on the bending line of the base plate, which is only 0.3 mm deep. groove;
3, phosphating: After phosphating the substrate, remove the grease and rust on the surface; glue the non-grooved surface of the substrate and the surface of the stainless steel;
4, dry glue: glue the two types of boards The applied adhesive film is allowed to dry until it is not sticky;
5. Bonding: the beam plates are bonded with accessories and door panel reinforcements;
6. Reinforcement: Finally, the door panels are reinforced by welding without affecting the appearance. .
Like and follow the author to learn more about stainless steel decorative products.
can also leave comments and express your opinions to communicate with the author and make mutual progress.
