How to strengthen the wifi signal if it is too weak? Let me share with you four direct and effective ways to enhance WiFi signal:
. Change the wireless router signal mode to wall penetration mode.
. Add another secondary route to increase the WiFi signal range.
. Install signal amplifier .
. Directly use mesh distributed routing, or parent-child routing.
Let’s briefly analyze the advantages and disadvantages of these four methods:
The first method: directly utilize the potential capabilities of existing wireless routing without additional costs. However, by increasing the wireless transmission power, although the gain is increased and the signal is linearly transmitted farther into rays, the signal range is narrower, the signal is unstable, and not all remote WiFi signals are strong.
Even if the wireless router with " beam forming" technology can intelligently target the position gain of the receiving end, it is unstable at long distances.
The second method: add an additional secondary wireless router, whether wired or wirelessly bridged, the WiFi signal will directly become stronger and the network will be relatively stable. But in this way, the WiFi names are different, and the switching process will still be interrupted.
The third method: install a signal amplifier for the wireless router. This method is easy to install. Generally, you can directly plug the amplifier into the power supply to amplify the signal for the router. Although it is easy to install, it has strict location requirements. If it is connected wirelessly, it cannot be too far from the original router.
The fourth method: directly use Mesh distributed routing, or sub-mother routing has the best effect, ensuring that each coke oven in the room has a signal, and the WiFi signal strength is also guaranteed. The disadvantage is that multiple routes increase the cost, and wiring is also more troublesome.
The author recommends that it is best to use wired connections for Mesh networking. The delay rate of wireless connection effects will be very high, downloading and watching videos will not be obvious, and online games will make people crazy. However, wired connection cabling is often subject to environmental restrictions.
There is also the kind of power modem network delay and high packet loss rate. After all, the mains line interferes greatly with the network signal.
Therefore, when choosing a route, choose a route with mature technology and advanced technology and higher power if the apartment size is moderate. If the house is large in size and has many rooms, or it is a villa or a duplex, you can finally lay out the cables in advance and directly connect to the whole-house routing of the Mesh network, and choose which POE power supply route, without providing separate power supply to the sub-routers.
