If your child is equipped with Xinlexue glasses, you must pay attention to the following points!
Otherwise, even if it is equipped, the prevention and control effect will not be good.
1. If your child’s nose bridge is relatively low, if you choose a frame, you must wear a frame with nose pads and . Carefully choose frames with integrated nose pads, which have better stability. The frame height is between 30mm-40mm. .
2. After choosing the frame, you must make adjustments to ensure that the pupil position is close to the geometric center of the lens, and mark the pupil height. The reason is that if this type of defocused lens is worn too low, the pupil height will be too large. , will cause most of the defocus area to be worn away, and the prevention and control effect will be weakened.
3. When taking out the glasses, it is best to take a picture with the child on a horizontal plane and head-on to record the correct wearing position of the child. Regularly observe the position of the glasses frame on the child's face at home. If it slips a lot, you need to remove it in time. Adjust, (if it is worn incorrectly, it will cause blur and affect the prevention and control effect) otherwise the eyes will not only be blurred through the out-of-focus area, but also greatly affect the prevention and control effect.
4. Xinlexue lenses are PC lenses. The advantage of this lens is that it has high toughness, but poor wear resistance. Use lens cloth or clothing to wipe the lens directly. It is best to use clean water and non-abrasive detergent or detergent. Rinse with hand sanitizer and then wipe dry in one direction to ensure good light transmittance of the lens.
If your child is equipped with Xinlexue, you must pay attention to the following points, so as to achieve good prevention and control effects.
Summary:
1. Choose frames with nose pads
2. After selecting the frames, adjust them
3. Maintain the correct wearing position
4. Avoid wiping the lenses directly with lens cloth, clothing or paper towels.
