BL200Pro Description: Connect to an Ethernet-based fieldbus through the ETH 2 interface, and ETH1 is used to connect to other nodes that require Ethernet access.
BL200Pro Coupler Ethernet interface
IP Address Selection Switch
8-bit DIP Switch is used to set the IP address. The encoding of the DIP switch is bit-wise, starting from the DIP switch 1 of the least significant bit (2 0) to the DIP switch 8 of the most significant bit (2 7), corresponding to the decimal value: 0-255.
BL200Pro Coupler IP address selection switch
For the DIP switch, the IP address is 1111 1111 (decimal 255), the IP address can be specified according to the web page settings, the web page settings can be automatically obtained. When the web page is not set, the IP address is: 192.168.1.10. When the value of the DIP switch is 0000 0000 – 1111 1110 (decimal 0-254), determine the 3rd byte of the IP address, and the 1st, 2nd and 4th bytes are fixed bytes, i.e. 192.168.xxx.253.
Process Data Definition
BL200Pro Coupler includes functions of BL200, BL200UA, and BL200M, so Modbus mapping address, OPC UA data point Node Id, and MQTT identifier are applicable to BL200Pro.
Siemens fieldbus distributed IOBL200Pro
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-