earthwork calculation software FastTFT focuses on site earthwork calculations. On June 28, 2022, the earthwork calculation software V15.2 was released again. This version also repairs, adds, and optimizes the problems found in the earthwork calculation software FastTFT V15.1.1. Some functions. This upgrade of
is released in the form of a patch package. You can directly check and download the new patch package through the Feishida Upgrade Center for upgrading. The new and improved functions of
are as follows. Users are welcome to continue to provide feedback and suggestions for improvement:
1, the new [ triangulation network cutting] function is added, which supports the internal and external cutting of the triangulation network arranged by the triangulation method, and deducts the areas that do not participate in the calculation of earthwork ;
2. Added the [Characteristic Line Slope Elevation Labeling] function, which supports the specified position of the characteristic line slope or batches the elevation labeling of the feature line and slope intersection points;
3, the new [Grid Grid Coordinate Labeling] function, supports the specified Coordinates are marked on the grid grid of squares, blocks, areas, etc.
4, optimize the section method [Draw Slope] function, support one-click generation of slope lines during multi-level grading;
5, optimize the two functions [Calculate average natural elevation] and [Calculate average design elevation], support batch Select a range, automatically calculate the average elevation and quickly mark the interior of each range.
6. Optimize the table function for underground multi-layer earthwork calculation and statistics, and support the calculation of the percentage of the volume of each layer to the total volume;
7. Optimize the table function for the section method earthwork volume statistics, which can support the calculation of the generated earthwork volume statistics table. Perform paging;
8, optimize the cross-section method earthwork calculation and layout section line function, support adding number font settings when laying out section lines, and also support the adjustment of font related parameters for batch section line numbers in the later stage;
9, optimize the cross-section method earthwork calculation to generate sections The graph function supports automatic marking of the filling and excavation area of each section when generating cross-section diagrams and ;
10, fixes known issues with some functions;
