Nowadays, the equipment used in the production of soy products is much higher than that of the traditional method. A set of fully automatic soy product equipment makes tofu making simple and efficient, and has been recognized by most people. The slag loading machine is a small piece of equipment that is optional in soybean product equipment. It is not very eye-catching and many people think it is dispensable, but is this really the case?
Friends who have made soy products know that in the daily grinding process, soybeans are not ground once and then thrown away. That would be too wasteful, so they are usually ground two to three times. When grinding for the second time, a slag loading machine is used. Modern refining slurry is separated. The slag from the first pass can be directly separated into the slag loading machine. Water is added, and the slag loading machine automatically stirs. Load the slag into the hopper for secondary refining and tertiary refining.
Slag loading machine
But if this humble slag loading machine is missing, after the slag is separated, manual stirring is required to add water. In order to stir evenly, you need to pay attention to the length of time, and the time is too short. After mixing evenly, you need to manually scoop the mixed residue into the hopper bit by bit. This process is not difficult. The problem is that it not only wastes time but also consumes labor. Many people's waists cannot stand such a squat. Together.
Therefore, don’t look down on this inconspicuous slag loading machine. With it, it saves a lot of trouble. It is recommended that you don’t forget to bring it when purchasing soy product equipment.
