KROM solenoid valve is an industrial equipment controlled by electromagnetism. It is an automation basic component used to control fluids. It is an actuator and is not limited to hydraulic and pneumatic. Used in industrial control systems to adjust the direction, flow, speed and other parameters of the medium. So what are the applicability aspects of KROM solenoid valve?
krom solenoid valve
KROM solenoid valve can be used with different circuits to achieve the desired control, and the control accuracy and flexibility can be guaranteed. There are many types of solenoid valves . Different solenoid valves play a role in different positions of the control system. Commonly used ones are one-way valve , safety valve , direction control valve , speed regulating valve, etc.
KROM pressure switch , KROM solenoid valve, KROM flow valve, KROM pressure regulating valve, KROM gas pressure regulator, KROM filter, KROM pressure switch, KROM solenoid valve, KROM flow valve, KROM pressure regulating valve, KROM gas pressure regulator , KROM filter, gas pressure regulator, ball valve , etc. Hot-selling product models: KROM main gas valve DMV-D DN125 224385, KROM double solenoid valve DMV-D5080/11, KROM double solenoid valve DMV-D5125/11 DN125 , KROM pressure regulating valve EK5.280G-FRS5065.
Brand description:
KROM is committed to the reliable and clean combustion of gas. We develop and produce innovative system solutions for the fields of heating, industrial heating, and gas engines.
KROM solenoid valve is a tool for controlling media, and its working principle is not complicated. In the solenoid valve, there is a closed cavity with through holes at different positions. Each hole leads to the trachea of a different solenoid valve. There is a valve in the middle of the cavity, and the two sides are solenoid . Which side of the magnet coil is energized? The valve body will be attracted to which side, by controlling the movement of valve body to block or leak different exhaust holes, and the air inlet hole is normally open, hydraulic gas will enter different exhaust holes tube, and then push the air-rigid piston through the pressure of the air, and the piston drives the piston rod , and the piston rod drives the mechanical device. In this way, the mechanical movement is controlled by controlling the current of the electromagnet.
KROM There are many kinds of solenoid valves. Different solenoid valves play a role in different positions of the control system. Commonly used ones are one-way valves, safety valves, directional control valves, speed regulating valves, etc.
KROM solenoid valve applicability:
1, medium characteristics
1) Choose different types of solenoid valves for gas, liquid or mixed states;
2) Products with different specifications for medium temperatures, otherwise the coil will burn out and the seals will age, seriously affecting the service life;
3) Medium viscosity, usually below 50cSt. If it exceeds this value, when the diameter is greater than 15mm, use multifunctional solenoid valve ; when the diameter is less than 15mm, use a high viscosity solenoid valve;
4) When the medium cleanliness is not high, a backflush filter should be installed in front of the solenoid valve Valve, when the pressure is low, a direct-acting diaphragm solenoid valve can be used;
5) If the medium has directional flow and no reverse flow is allowed, bidirectional flow is required;
6) The medium temperature should be selected within the allowable range of the solenoid valve.
KROM solenoid valve has a closed cavity with through holes at different positions. Each hole is connected to a different oil pipe. There is a piston in the middle of the cavity and two electromagnets on both sides. Whichever side of the magnet coil is energized will be attracted to the valve body. On either side, different oil drain holes are opened or closed by controlling the movement of the valve body, and the oil inlet hole is normally open. The hydraulic oil will enter the different oil drain pipes, and then push the piston of the oil cylinder through the pressure of the oil. , the piston drives the piston rod, and the piston rod drives the mechanical device. In this way, the mechanical movement is controlled by controlling the current on and off of the electromagnet.
