Introduction to UKCA certification in the UK:
According to the requirements of the UK building product regulations, from January 1, 2023, all construction products entering the UK must comply with relevant regulations and standards. After the UK4Brexit , the UKCA (UK Conformity Assessment) mark is the market access sign for products that intend to enter the UK market (England, Welsh and Scotland ). It covers most products that originally required the CE logo. At the same time, construction products/wood wire (WW) insulation material that enters EU still need to undergo CE certification .
Building insulation material / Mineral Wool Insulation material UKCA mark and CE mark are the same as the manufacturer is responsible for ensuring that the product complies with the standards stipulated in the law. According to the CPR of the building product regulations and the response building product standards (such as the implementation standard for wood wire (WW) insulation materials is: EN 13168), select the corresponding certification system (System 1, 3 or 4), and inspect the wood wire (WW) products in accordance with the requirements of EN 13168, or evaluate and certified, and add the UKCA mark.
Zhongke Yishuo CASfire maintains good cooperation with the UKCA certification agency Approved Body. It can conduct a testing and certification evaluation according to the standards, and obtain UKCA certification and CE certification at the same time.
Wood wire (WW) insulation material UKCA certification –EN 13168
EN 13168Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification (Incorporates Amendment A1: 2015);
EN 13168Building insulation Products. Factory makes wood wool (WW) product specification
EN 13168Wood wire (WW) insulation material UKCA certification Product scope involved:
This European standard specifies the requirements for factory-produced wood wire (WW) products for thermal insulation of buildings, with or without surfaces or coatings.
These products are manufactured in the form of plates or sheets.
This European standard also stipulates the requirements for factories to produce composite products, which are made of wood wire and other insulating materials .
This European standard describes the product characteristics, including procedures for testing, conformity assessment, labeling and labeling.
Products covered by this European standard are also used for prefabricated insulation systems and composite materials
EN 13168 Wood Wire (WW) Insulation Material UKCA Certification - Certification Process:
1. Fill in the UKCA Certification Application Form,
2. Provide product information, evaluate and certification system (system 1, system 3 or system 4)
3. System 1 conduct factory review or system 3 sample sending test
4. Sample performance testing (EN 13501-1 fire resistance performance level testing, etc.)
5. Issuing test report/UKCA certificate
6. Issue the DOP documents required for UKCA certification and to add the UKCA logo on product
UK Declaration of Conformity (UKCA-DOP):
UK Declaration of Conformity is a document that must be accompanied by most products that legally carry the UKCA logo. In your document as the manufacturer, or your authorized representative (where permitted by relevant laws), you should:
1. Declare that the product complies with the relevant statutory requirements applicable to a particular product.
2. Ensure that the file contains the name and address of the manufacturer (or your UK authorized representative) and information about the product and conformity assessment agency
EN 13168 Wood Wire (WW) insulation material - related standards
EN 12086:1997, Building insulation products - determination of water vapor transmission characteristics
EN 12089, Building insulation products - determination of bending performance
EN 12430, Building insulation products
EN 12667, Building insulation products - determination of thermal resistance by protective hot plates and heat flow meter method - high and medium thermal resistance products
EN 12667, Building insulation products
EN 12667, Building insulation products
EN 12939, Thermal properties of building materials and products - Determination of thermal resistance by protective hot plates and heat flow meter - High thermal resistance and medium thermal resistance thick products
EN 13501-1, Fire protection classification of building products and building components - Part 1: Classification using fire test reaction data
EN 13820, Construction thermal insulation material -Determination of organic content
EN 13823, Construction products reaction test to fire - Construction products, excluding floors exposed to thermal attacks of single combustion substances
EN ISO 354, Acoustics - Measurement of sound absorption in reverberation chamber
EN ISO 1182, Construction products combustion reaction -Determination of non-combustibility test
EN ISO 1716, Combustion reaction test of construction products - Determination of combustion heat
EN ISO 11654, Acoustics - Sound absorber for buildings - Sound absorption level
EN ISO 11925-2, Fire reaction test - Flammability of construction products directly impacted by flames - Part 2: Single fire source test
For details, please consult: Zhongke Yishuo Fire Prevention Quality Service Co., Ltd.
Tel: 0592-3500085-803
Email: info@CASfire.cn
Website: http://www. CASfire.cn
JJ2022
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-