This content comes from @What is worth buying APP, and its views only represent the author himself | Author: Feifan Feifan
Creative position statement: The products measured in this article are purchased at your own expense. If you get it by participating in an event at Aunt Zhang’s house, I will point it out in the article. Adhering to an independent evaluation view is the basic bottom line of my creation, and it will never be biased due to the different sources of the products. Please rest assured.
sequence
At the beginning of 4, everyone shared some very helpful photography tools I used after I bought A7C for a period of time. After half a year, after continuous updates and attempts, I have added some excellent products. Today I will give you another article to talk about.
The products mentioned in this article have a big feature that most of them are domestic brands. After years of hard work, domestic brands have gradually stopped being small accessories in photography equipment. At present, it seems that except for cameras, all the products I use are already domestic products. Their characteristic is that they are first-class in cost performance, allowing many working-class enthusiasts like me to play the products they want with a reasonable budget.
Yongnuo E-Port Three Heroes
Yongnuo 85F1.8, and Yongnuo 35F2, two fixed-focus lenses account for about 90% of my A7C’s hang-up time, and the remaining 10% is left for Baiwei , but these two fixed-focus lenses are my main force when shooting products, outfits, portraits, traveling, etc.
Yongnuo 85 fixed
This is the first full-frame fixed-focus lens launched by Yongnuo on the Sony E-mount. The activity price is basically around 1,600 yuan to get it. The feature is that the aperture is fully opened, the aperture is very sharp, it is small and light, and it is one of the 85 heads with the highest cost-effectiveness of the Sony E mount.
Sony E-mount VIZZ 85F1.8 and Yongnuo 85F1.8 Sigma 65F2 are in the center image quality under four apertures~
edge image quality under four apertures.
I used the Sony E-mount VIZU 85F1.8 and YNU 85F1.8 Sigma 65F2 to compare them. In terms of sharpness, the three lenses have good performance at the maximum aperture, and the sharpness is basically the same after a little aperture. The price of VIZU this lens is about 200 yuan more expensive than YNU (transaction price), while the price of Sigma this lens is basically over 4,000. The difference between the two times is basically the same sharpness. It is not an exaggeration to say that it is the glory of domestic products.
In addition to looking at the focus, you can also see the closest focus distance of the three lenses. Sigma is closest, followed by Yongnuo, and Zhuoshi is the farthest. On the outside of the focus, Yongnuo and Weizhuoshi are both rounded in the middle and deformed at the edges, and even the deformed circles are the same. Because of the closer focus, Yongnuo's light spot has a larger effect. Although Sigma started with F2, it has a closest focus distance, so the out-of-focus is also very good, and the edges are relatively round.
. In terms of focus speed, Yongnuo is also the first, completely exceeding the fixed speed of Sigma 65. The picture above is the focus speed of Yongnuo 85, and the picture below is the focus speed of Sigma 65. You can feel it.
speed comparison, isn't it very obvious?
In the PK with Weizhuoshi, the size of Yongnuo is smaller than that of Weizhuoshi. Yongnuo is 67, non-metal body, and weighs 346g; Weizhuoshi is 72, metal body, and weighs 484g Weizhuoshi is 138g heavier than Yongnuo, and Yongnuo is more cost-effective in filter diameter. The sharpness of the center and edges of the two lenses is very high, and there will be slight differences in the edges, but it can be ignored in reality; the feel of Weizhuoshi metal body has a very good texture to the touch, and the Yongnuo non-metal body has a weaker texture; the workmanship of Weizhuoshi is slightly better than that of Yongnuo; in terms of functionality, the Yongnuo body has AF/MF switching and custom buttons, Weizhuoshi does not, which is more convenient.
When considering the cost-effectiveness, I personally think that in the 85 focal range, Yongnuo's 85 quadratic performance is the highest, and the results are also very good.
To talk about the disadvantage, this hood is really difficult to install.
Yongnuo 35 Determined-My best hanging head
The first lens I bought with A7C was Yongnuo 85 Determined. I tried Yongnuo's lens for the first time. At first, I was full of anxiety. Later, after using it, I found that the quality was really good. Then I entered the 35F2 that Yongnuo was the most recommended by everyone. Why is it the most recommended? The 35-cent fixed-focus priced at over 1,200 yuan is divided into 12 periods per month. Do you know that in the heart of Sony Party, this is similar to not having money?
The extremely fast focus speed has basically no breathing effect, medium-to-high-level sharpness, small and lightweight, and high-quality colors, isn't it enough?
Of course, it is not realistic to be perfect for products that are just over a thousand years old, right? First of all, the first question is that although the center outside the focus is round enough, the edges will become rugby-like and have slight onion rings. You have to say that this is a problem. I think it depends on people. After all, the old shots are also popular with many people. Isn’t this a strong retro style?
Another problem is that it is the same as 85 heads. The hood snap is unreasonable, and it is inconvenient to install the formal and reverse. I often twist my UV off while twisting, so I often throw the hood off at home.
As for purple edge ~
full aperture sharpness~
distortion~etc, all controls well, plus the weight of 295g, is there a hanger head ? Personally, I think as long as I am a civilian photographer like me, Yongnuo's 35F2 is currently the only cost-effective choice for the 35 focal range.
JD
YONGNUO Yongnuo 35mm F2S DF DSM Wide-angle fixed-focus lens Sony E-mount 52mm499 yuan real-time price updated 7 hours ago Go to buy
Yongnuo 50-Ship new calibration
At the end of October, Yongnuo finally updated the 50 calibration of the E-mount, and this most standard focal segment Yongnuo has finally filled it. There is an extra function button icon on the 50 box, which actually means that there are two customized function buttons on the 50 fixed mirror, one more than both 85 and 35. In addition, the aperture can be received from a maximum of 1.8, and the previous two lenses received up to 16.
The three lenses are as above ~85 weigh 346g, 50 is the metal body weighs 395g, 35 weighs 295g~
If you remove the hood, you can find that the design of 50 is fixed at the front end of the lens is simpler, and the focus ring extends directly to the front of the lens. This design seems to be more comfortable, and the red circle is also removed.
diameter, both 85 and 50 are 58mm, but the lens area of 85 is obviously much larger than that of 50, and the diameter of 35 is 52mm. The manufacturer did not indicate it on the coating of
~ The other two in the picture above have UVs.
0 must have one of the most obvious improvements, the hood snap is finally normal. Before, whether it was 35 or 85, the hood snap was too difficult to use. The left 61 is a 50-determined hood, and the right 60 is a 85-determined hood. The two can be used alternately.
0 After removing the red circle and adding subtle changes in the design, it is the most comfortable model among the three lenses. The ultra-wide focus ring is very comfortable to touch and is very good to use.
actually takes into account the early A7 users, such as M2, R2 and A7C, and can enable more functions to be activated through custom keys for easy use.
In fact, the machine effect is as above~
Judging from the MTF officially released by Yongnuo, this data is a bit amazing because the quality is really not bad. What is the reality? Let’s test
using this to test, and compare the edges of the red frame with the center.
has good clarity when the aperture is fully opened. Although it is slightly softer after closing the aperture for one gear, it is really just a little bit. By F18, it gradually becomes weaker, and finally by F22, the edge and center sharpness decreases to a certain extent, but the image quality is still available. In summary, Yongnuo's 50-fixed full aperture is fully available and has good sharpness. When it receives 2.8, it has very good sharpness. Although it is slightly attenuated under the small aperture, the sharpness is not too low.
Sony original 50 standard, purple edge is very serious. How about the purple edge of Yongnuo? I took the red frame position above to see. There is only a slight purple edge under
F1.8, and the reduction is much lower when it receives 2.5. After a little more, it basically disappears gradually. The purple edge control is very good.
This is a photo I took directly at the other buildings in the community at night, and took the red frame position above to view the circles out of focus.
In the case of F1.8, the aperture ring in the center is very round, the edge is still rugby-shaped, and it starts to turn polygons when it receives 2.0. By the time the F4 polygon begins to become obvious, the circles begin to shrink and become smaller.
4 Another scenario, its out-of-focus performance is like this~~
The previous GIF will be a little more direct.
front Ace is in the closest focus position of 50, the focus speed is very fast, and the breathing effect is also relatively obvious.
In summary, in terms of performance alone, Yongnuo's 50-degree is at the medium level of the 50-degree I have used, but at the price of less than 2,000 yuan, I seem to have a SLR era, each company has 50-degree priced at just over 1,000 yuan, and that kind of happiness. Especially after experiencing the mediocrity of the original E-port 50/F1.8 lens of Sony original E-port 50/F1.8, and then contact the cost-effectiveness of Yongnuo 50-degree, it may be easier to choose...
Yongnuo lux160 Photography lamp
Previous article on photography equipment I mentioned that Nanguan’s LS150 is my main photography lamp. After using this lamp for a while, I found that there are still several points missing in lighting, such as the monochrome temperature cannot be adjusted, and the single lamp sometimes has not good effect. After selection, Yongnuo’s new lux160 was entered to make up for these problems.
actually highlights several characteristics in the official publicity. First of all, although it is called LUX160, it has a power of 180W, and can be remotely controlled by APP. It comes with a unique remote control, a version with adjustable color temperature. Other aspects are mostly available to lamps at this price.
I still shoot still life in my daily life. When I go out to shoot people, I basically don’t like to bring lights, so I bought a kit with adjustable color temperature and parabolic soft box . Everyone must pay attention when purchasing. The 600mm diameter parabolic soft box is mainly used for close-range small objects.
This parabolic soft box has a built-in layer of soft cloth in the middle of the hood. The double-layer soft cloth makes the soft light effect more appropriate. The entire hood has very good workmanship and quality, and the quality inside the hood I have come into contact with is very solid.
Yongnuo uses a single-handle control rod to adjust the elasticity of the angle, and is equipped with a U-shaped handrail 45 degrees on the lamp body to facilitate the adjustment of the angle. It is very convenient to adjust the angle of the lamp as a whole. It controls the elasticity of the lamp with one hand and the U-shaped rod with the other hand. Unlike other brands of lamps, it must be loosened left and right before adjustment. In terms of overall design, both heat dissipation and the technological sense of the lamp are considered. I personally think it is quite good.
have large areas of heat dissipation holes at the bottom and top of , and the fan is large enough. In fact, the noise is basically not felt, and the heat control is done well. What is worth talking about is the adjustment screen at the tail of the LUX160, which is an adjustment panel and also the remote control of the LUX160.Pay attention to the buttons under yongnuo at the bottom of the control panel. Through it, you can use the control panel as a remote control.
is like this after taking it off. Although it is a little bigger, the advantage is that you no longer have to worry about not being able to find the remote control....
Yongnuo LUX160 has 12 built-in lighting effects, and both brightness and speed can be adjusted. In addition, the working efficiency of the lamp also provides three modes to choose from, the color temperature and brightness can also be adjusted at will, and all aspects meet my requirements for a small photography light .
In terms of the quality of the lamp, just from the perspective of taking small still lifes, Yongnuo's lux160 is very suitable for pairing with a 600mm diameter parabolic soft box. The light on the left side of the picture above is closer, so it looks a bit brighter, all of which are not adjusted in the original picture. Let’s take a look at the effect of the small soft box when shooting still life.
When shooting products that are not figurine types, the light gathering effect of the parabolic soft box will be more obvious. In addition to the side light reflecting due to the camera position problem, both the front light and the top light have good effects.
The photo shooter light on the above picture is Yongnuo LUX160.
color temperature adjustable is quite useful. For example, I have various combinations of my computer desktop. If you use white light, it will look intact. With warmer lights, the products you shoot may be more realistic.
The photo shooter light on the above picture is Yongnuo LUX160. The small sunshade is also very suitable for home use. The original 900*600mm square sunshade can only be used in the living room because it is too big. Yongnuo's combination is very convenient for me to play in some not-so-spacious places at home, such as my super small study.
The photo shooter light on the above picture is Yongnuo LUX160. When shooting small objects, the remote control or APP is very convenient to operate. How can I say this? I'll give you a chestnut.
When shooting small objects, the situation on the scene is probably like this. Most of the lights are next to the subject. At this time, I use my mobile APP or remote control to control Yongnuo's photography lights. I can see the changes in the picture on the camera screen very intuitively. Because the previous lights did not have a remote control, they could only adjust them repeatedly, which was very troublesome. Compared with the remote control and the APP, you will also find that simple brightness adjustment is fine. When you want to shoot video and select some lighting effects, it is really not as convenient as the APP.
I think Yongnuo LUX160 is more suitable for users like me who often shoot products, especially the parabolic softbox version of the set, plus many functions and variable color temperatures. The excellent APP and its own remote control are still very good to use.
Kingston TF256G red card
As he gradually began to contact the big drones and sports cameras, considering DJI's product iteration and updates in the next three years of sports cameras and drones, a strong enough, large enough capacity and long life cycle was included in the procurement plan, and the final choice was to use the Kingston TF red card.
This red card is currently a relatively high-spec level for TF cards. The speed of UHS-II U3 and V90 is officially 285MB/s. Not to mention 4K, 8K is also compatible. If the phone also supports TF card, this APP that supports A1 level will not become a bottleneck for the phone at all.
Currently, the devices I use this card are mainly action 2 and mavic3 above. On JD.com's product page, the support for TF cards is only required to be the UHS-I speed specifications. I believe that this card can still meet the usage needs when the Action 3 generation and Mavic 4 generation are released.
This is the situation of some memory cards I am currently serving. Yellow is the highest data. You can see that the fastest card is Rex 's SD1066X. How does Kingston's red card perform? I also used the following three software for testing:
ATTO 4.0
CrystalDiskMark 8.0.1
HD Tune Pro 5.75
The final result is as above. I added the data to the previous table, where red is the fastest current speed.
Never expected that the actual test speed of this red card in Kingston was twice as high as my fastest card. On software testing, CrystalDiskMark is far ahead of its reading and writing. Although it is not twice as high as HD Tune Pro and ATTO, it is much more than that. In actual copying of files, the speed of 184MB per second is also very fast. It feels like this speed is better if you choose 256G and 512G capacity regardless of price.
Kingston SXS2000 1T mobile hard disk
For people who often have to carry a bunch of arws and video originals, cloud disk cannot meet my storage needs. Therefore, mobile hard drive is an important tool I carry with me every day.
My first requirement for mobile hard drive is: speed. The official promotion of SXS2000 can reach up to 2000MB/sec, which makes me feel very scary! You should know that the fastest mobile hard drive I have ever come into contact with is only 1,000MB/sec.
The second appeal is: security. I rarely go outdoors to shoot in the wild, so my requirements for it are basic dustproof, fall protection and shockproof. There is no need to use military-grade three-defense products for the time being. The SXS2000 just reaches IP55 certification, which is completely enough for me. When filtering, it also found that the mobile hard disk that reaches this speed has three-defense function, and is not too large in size, so there are not many choices. Finally, I bought the Kingston 1T SXS2000. When I got it, it was wearing a fall-proof condom.
The first thing I got is speed test, or use these three software plus a copy of the movie file:
ATTO 4.0
CrystalDiskMark 8.0.1
HD Tune Pro 5.75
HD My computer in my home is MSI B450 mortar +3700X, and the fastest interface on the motherboard is USB3.1 The theoretical bandwidth of the gen2 interface is 10Gbps. In actual measurement, it seems that it can only reach half of the promotion of Kingston SXS2000. Of course, in terms of actual copying of files, the speed of 620M/second has already made me very satisfied.
I also have a Razer Blade 15, which is configured with Core 11th generation i9 and 3080, and the interface is equipped with Thunderbolt 4. According to the principle, the bandwidth of Thunderbolt 4 is 40Gbps, which is completely satisfying. The only thing I have to worry about is whether the Thunderbolt 4 interface is compatible with the protocol of USB.2gen2? The actual test results of
are as above. Although Thunderbolt 4 has a bandwidth of 40Gbps, it does not seem to be compatible with the protocol of USB3.2gen2, and only reaches the same speed as USB3.1gen2. I'm so stupid now. More than 20,000 laptops can't achieve full speed. How can I do it?
read and write up to 2000MB/s, and it has a small and three-defense design - Kingston Mobile Solid State Drive XS2000 Usage Experience Creative Position Statement: As a content creator, the popularity of 5G and the rapid rise of vlog/short videos in recent years have also made everyone pay more and more attention to the shooting and preservation of video materials.But on the one hand, high-definition materials with increasingly high requirements for hard disk capacity. On the other hand, due to the limitations of technology, the capacity of traditional USB flash drives is basically 128GB or less. Because the internal physical disk is still rotating and storing data, the transmission speed is not only relatively slow, but Shen ShaoNeo| Like Comments Collection View details
Later, when I searched for what is worth buying Kingston SXS2000, I found that the boss Shen Shao Neo had explained this. The motherboard of Z590 or the latest Z690 has a USB3.2gen2 interface. The speed of these motherboards can be achieved by 2000MB/sec. If the motherboard does not have this interface, you can also purchase an additional USB3.2gen2 expansion card with PCIE interface.
After a lot of trouble, I finally figured out that the computer in my hand cannot achieve a speed of 2000MB/second for the time being, but the current speed is already very fast, which fully meets my daily needs. Moreover, the speed can be improved after the computer is upgraded in the future, effectively extending its service life.
In addition, under the current test environment of at room temperature of 15 degrees, Kingston's plastic-shelled mobile hard disk runs the test software at a rate of 1000MB/S for 10 minutes, and the device temperature is 31 degrees, and it basically doesn't feel anything when you touch it. Another metal-shelled mobile hard disk I am using with a capacity of 1T and can also achieve a rate of 1000MB/S, with a temperature of 40.2 degrees. I am very satisfied with the strength of Kingston products.
Fine Color G3 Pocket Light
After using the entry-level pocket light for a while, I found that this kind of small light has a lot of functions in going out and shooting small objects. Although the original pocket light is good, I still want to expect a more convenient and powerful one. Later, after understanding, I entered a Fine Color G3 Pocket Light.
G3 has a power of 12W, the color temperature is from 2600K to 10000K, and the color rendering ability is also above 97, with 9 additional special effects. These performances are basically the limit of pocket lights. What I am most satisfied with is the 4300mAh battery. With full brightness, love can reach a little more than 3 hours, which is the top priority. Another core is that G3 comes with an L-shaped mounting arm, which can be easily installed using the hot shoe interface.
And in terms of control, two 3-way control levers add a power button, which solves the inconvenience of the original pocket light in terms of control.
is more convenient to install and has a long battery life. When you go out, G3 has become my first choice, for example, it looks like this when you install it on ZV1.
Of course, you can do this too~~
and if installed on A7C, it is like this~~
or this~~The extra L-shaped mounting arm is very convenient. If you need it, there is also a hot shoe interface on the installation arm to use~
Product color G3 may also fully consider the user's convenience. The soft light effect of this front white soft light plate is still good, so G3 does not have an extra hood commonly known as lunch box. In fact, this is really good, and the lunch box is too easy to lose.
Put it together with smog kit, which is very integrated~
The effect when turning on the light~Photo taken by ZV1 is a bit less tolerance~
G3's brightness can be turned on to a very low level. This is a good review. Sometimes when taking photos of macros, low brightness is particularly useful.
brightness control, the brightness can be adjusted gradually by lever up and down, or you can directly press the rocker to quickly switch the preset brightness, which is more user-friendly in the design.
When the brightness is controlled, it can achieve the scanning effect~ It does not necessarily mean that the stick lamp cannot be used
Of course, RGB transformation, lighting effect, G3 is no problem at all. Although it is a pocket light, although it is a small, it has not lost any of the functions it should have, and the battery life is very high. Then in this case, the price is only more than 300, which really makes me very satisfied.
Smog Kit
I was ashamed. When I didn’t buy Smog products, I always thought it was a foreign brand. Until that day I went to find a handle and accidentally went to Smog’s official website to find that it was actually a company in Shenzhen... I felt like it was explosive at that time, because Smog’s product design to details and quality, I had always mistakenly thought it was a high-end imported brand...
Smog I bought a total of four products. The A7C rabbit cage I originally bought, because of the need to go out, I bought a solid wood grip and a handle on the top. Later, because my tripod cannot be used in reverse, the lowest position of the tripod is relatively high, and the support of the small tripod on my hand is not enough, and when I put on a heavier lens, I bought another Smog's tripod.
The biggest difference between Smog and common domestic accessories is two. The first is that the details are very good, and the product cannot touch the details such as burrs and bulges. No flaws can be found with macro lenses.
The second is that the material is very solid. From the material used and the texture of the paint, you can see that it is very classy and can give people a safe and stable feeling. When you install it on a device worth 10,000 or 20,000 yuan, that sense of trust will be more obvious.
When A7C was first released last year, only Youlanzi and Smoger's rabbit cages were released. After comparing, I think Smoger's rabbit cages seem to be better in terms of installation stability. What makes me most comfortable is that this rabbit cage of Smog has a magnetic wrench at the bottom, with a hexagonal screwdriver and a wrench, which can be used to unscrew the screws of the rabbit cage and to most rabbit cages and quick-loading boards. This is especially convenient when shooting, because it is enough to bring one of this type of thing, and there is no need to worry about not being able to find it. The magnetic suction is very firm, and the machine will never fall off if it is not dropped.
Also on this grip, Smog also placed a hexagonal screw wrench at the bottom, inserted it into the bottom and attached it with two magnets to ensure it is removed as you use. This design is very convenient for users.
editor should be a new product from Smog, and its design style and color matching are different from previous products. The color is painted with gray, which has a very good texture, while the design has more rounded edges, which looks more comfortable and more user-friendly.
In terms of workmanship and quality, I feel that the comparison is better than the all-black ones, and there are interfaces for installing other products on the top and front.
When paired with Smog's rabbit cage, this grip can be installed on the left or right. It is also great to buy two sides to install them together.
As for rabbit cage, believe me, you don’t have a better choice. Regardless of applicability, feel, or reasonable installation, Smog is the best rabbit cage in A7C, no one.
The whole metal workmanship of the tripod is the reason I bought it. Before, Youlanzi's tripod was used for ZV1. After all, you can't ask for too much plastic material. I always worry about it being unsafe when I had a bigger lens.
is also a workmanship that is visible to the naked eye. All burrs and burrs have been processed and the mold accuracy is very high.
The detailed workmanship is surprising, and domestic brands actually have such good workmanship. It’s not that there is no such craft in China, but that when everyone takes the cost-effective route, excellent workmanship will make you feel very rare.After all the products are installed on my A7C, the full open state is as above.
From the quality of Smog's products, it is completely the same as camera lens . Except for the products that are mostly universal interfaces, when you change the camera, you can continue to use it by changing a rabbit cage, without any limitations of bayonets. Most of the items can accompany you throughout your photography career, which is quite valuable in terms of calculation.
Looking at the cheap entry-level tripods, reflective umbrellas and other products I bought in the early days of my entry, I was eliminated early on because of my poor quality. It is also a hard truth for the accessories.
BenQ EW2780Q
monitor is the second most important thing for a photographer, and it is more important than a better lens. A photographer friend complained to me before that Party A always said that his photos were too bright, and he thought it was normal for him to see them. When I posted the photo, I found that it was indeed too saturated. It was normal for the desktop computers he edited at home to see his photos. It was too bright when I posted it on my laptop and . I found that the monitor was too old and the color was too dim. It was normal to change the monitor.
My office and newly installed computers use BenQ monitors. I've said the reason before.
The first is work requirements. I use the desktop computer for a lot of time to work and read text, followed by photo editing, video editing, and finally entertainment requirements. Therefore, the overall overall quality of the monitor must reach a certain score, and all performances cannot be too weak.
The second is physical needs. You are facing the monitor in the office all day, facing the mobile phone screen during intervals, and then facing the monitor when you go home. If a monitor does not do well in brightness control and blue light control, the fatigue of the eyes will further increase.
BenQ monitor factory color calibration, 99% RGB color gamut, it is not bad in color accuracy, meeting my core needs for monitors.
The black protruding module under the display is a sensor for smart dimming. Smart dimming and automatic brightness adjustment on mobile phones have the same principle. When the smart dimming is turned on, the brightness of the monitor will not be much contrast with the brightness of the ambient light. Therefore, whether we are at home during the day or editing pictures in the middle of the night, we don’t have to worry about the brightness of the monitor at all. We will leave it to the system to adjust automatically to further protect our eyes.
Whenever you see this icon light up, the system's smart dimming is working, helping you adjust the brightness of the monitor according to the ambient light.
After all, as office workers, we usually repair photos and videos are just a hobby, and we spend more time watching movies, watching web pages, etc. The EW2780Q has HDRI function, which can effectively improve the dark details when watching videos, but will not overexpose the brighter position. When you open the two movies on the hard drive, turn on and off the HDRi theater effect respectively under the relatively large picture of light and dark. You can see that after turning on HDRi, whether it is contrast, picture texture or overall appearance, the entire picture is much better than not turning on the HDRi function.
I have been explaining before that the basic monitor plus two small speakers is a very practical design. The EW2780Q troVolo speaker has good results and can meet the basic needs of watching and editing videos in sound. It is not the "listen to the sound" of the five-cent speakers in the early days that even the sound on the monitors could not accurately express. Similarly, saving a pair of speakers on the desktop is very rare when the desktop is tight. The small speaker that comes with
EW2780Q is more like a 2.0 speaker, with good high and lows on both sides. The biggest advantage is that it is light entertainment. It is very suitable, such as watching some teaching videos.
Or, review the Women's Federation~ I was dazed~
Watch Captain America plays a dress-up show~
and see Wanda's love, feel some love, and sadness~
Anyway, it is all kinds of basic video entertainment, which is completely enough in the small space of the study.
Of course, it is also very suitable to play switch~ users who do not have too high requirements for speakers, a monitor is completely competent.
Overall, BenQ EW2780Q is a 27-inch K monitor with high comprehensive quality. It can not only meet accurate needs, but also meet the needs of entertainment. I occasionally watch TV series, cut videos, play witch, and no longer have to buy multiple speakers to occupy the desktop. In terms of protection of users, the optimal level of the monitor is also achieved, making it very safe for a heavy monitor user.
Summary
Thanks to domestic manufacturers for their efforts over the years, making the cost of photography lower and lower.
is very touching to the domestic Yongnuo lens, which can become a tool for daily use in your lifetime.
is amazing at the quality of Smog, it is likely to become my heirloom.
Kingston's speed allows me to fly quickly in all my photography work.
quality color pocket lights really make me understand that design is not just a simple appearance for a lamp.
and BenQ's monitors take into account everything I have to do with my life and work.
I hope my sharing will be helpful to everyone~ Everyone is welcome to discuss your views in the comment area.
Below are some of my recent articles. Everyone is welcome to check and communicate with each other~
