iPhone 13 series phones have been upgraded in appearance and hardware. The iOS 15 system equipped with has also made many changes in function, but various problems are still frequently exposed. Some time ago, it was a hot search on Weibo due to the problem of "red and green two-color screen".
Recently, some users have reported that their iPhone 13 often fails during use, and the screen is stuck when opening the App or other interfaces. In severe cases, even the screen becomes black, and forced shutdown is useless.
Have you encountered similar situations on your iPhone 13? Don't worry, the iPhone 13's screen stuck or black screen may be related to the device's power supply and oil pipe, and it is also likely caused by iOS system.
Before going to Apple's after-sales repair center, you can try the following 2 solutions:
Method 1: Force restart iPhone
If your iPhone 13 only has screen stuttering and stuck, you cannot use the screen to operate or shut down. The fastest fix is to force restart the device.
Force restart iPhone 13: Press and hold and quickly release the volume up button, then install and quickly release the volume down button, and finally hold the side button until the Apple logo appears on the screen.
Method 2: iOS system repair
If your iPhone 13 is completely stuck in the black screen and the forced restart does not work, you can try iOS system repair. For example, Fengke iOS system repair tool can help users easily fix various iOS system problems, including iPhone stuck, black screen, white screen, constant restart, inability to boot, stuck in recovery mode, etc. The operation of the software
is also very simple. You might as well give it a try:
Step 1: Download and install Fengke iOS system repair tool on your computer. Select "Standard Mode" after running the program.
Step 2: Connect iPhone 13 to the computer through the data cable, and click "Download" to download the firmware after the program recognizes the device.
If the program cannot recognize iPhone 13, please follow the screen prompts to bring the device into recovery mode or DFU mode.
Step 3: After the firmware download is successful, click "Start Repair". The entire repair process is about 10 minutes, be careful not to disconnect the device.
Method 3: Check iPhone 13 Power
As mentioned earlier, the black screen of iPhone 13 is likely to be caused by the power problem. Therefore, it is recommended that you check the power supply. First check the iPhone charger and see if the charging cable and adapter are damaged. You can then try charging the device with other charging cables and adapters for at least 30 minutes until the battery icon appears on the phone screen.
If none of the above methods solve the problem of black screen stuck in your iPhone 13, it is best to bring the device to Apple's after-sales center or authorized repair points for inspection and repair.
