National Standard
GB 30871-2022
" Special Operation Safety Standards for Hazardous Chemical Enterprises "
National Standard "Special Operation Safety Standards for Hazardous Chemical Enterprises" is under the jurisdiction of 450 ( Ministry of Emergency Management ) and entrusted to TC288SC3 (Chemical Safety Branch of the National Safety Standardization Technical Committee) to be implemented.
GB/T 41344.2-2022
Machinery Safety Risk Warning Part 2: Monitoring
National Standard "Mechanical Safety Risk Warning Part 2: Monitoring" is under the jurisdiction of TC208 (National Machinery Safety Standardization Technical Committee), and the competent department is the National Standardization Management Committee.
GB/T 41344.1-2022
Machinery Safety Risk Warning Part 1: General Rules
National Standard "Mechanical Safety Risk Warning Part 1: General Rules" is under the jurisdiction of TC208 (National Machinery Safety Standardization Technical Committee), and the competent department is the National Standardization Management Committee.
GB/T 41344.3-2022
Machinery Safety Risk Warning Part 3: Grading
National Standard "Mechanical Safety Risk Warning Part 3: Grading" is organized by TC208 (National Machinery Safety Standardization Technical Committee), and the competent department is the National Standardization Management Committee.
GB/T 41344.4-2022
Machinery Safety Risk Warning Part 4: Measures
National Standard "Mechanical Safety Risk Warning Part 4: Measures" is under the jurisdiction of TC208 (National Machinery Safety Standardization Technical Committee), and the competent department is the National Standardization Management Committee.
GB/T 41355-2022
Mechanical safety Dynamic safety distance between autonomous mobile machinery and human body Determination method
National standard "Mechanical safety Dynamic safety distance between autonomous mobile machinery and human body Determination method" is under the jurisdiction of TC208 (National Machinery Safety Standardization Technical Committee), and the competent department is the National Standardization Management Committee.
GB/T 41351-2022
Machinery safety, safety-related wireless control devices, general technical conditions,
National standard "Mechanical safety, safety-related wireless control devices, general technical conditions" is under the jurisdiction of TC208 (National Machinery Safety Standardization Technical Committee), and the competent department is the National Standardization Management Committee.
GB/T 41346.2-2022
Machinery safety, safety protection for mechanical equipment transfer, part 2: tensioning device safety requirements
National standard "Mechanical safety, safety protection for mechanical equipment transfer, part 2: Safety requirements for tightening device" is under the jurisdiction of TC208 (National Machinery Safety Standardization Technical Committee), and the competent department is the National Standardization Management Committee.
GB/T 41346.1-2022
Machinery safety Machinery equipment transfer safety protection Part 1: Structural design guidelines
National standard "Mechanical safety Machinery equipment transfer safety protection Part 1: Safety requirements for tensioning devices" is under the jurisdiction of TC208 (National Machinery Safety Standardization Technical Committee), and the competent department is the National Standardization Management Committee.
GB/T 41349-2022
Mechanical safety emergency stop device technical conditions
National standard "Mechanical safety emergency stop device technical conditions" is under the jurisdiction of TC208 (National Machinery Safety Standardization Technical Committee), and the competent department is the National Standardization Management Committee.
GB/T 41348-2022
Mechanical Safety Technical conditions for two-hand manipulation device
National Standard "Mechanical Safety Technological Conditions for two-hand manipulation device" is under the jurisdiction of TC208 (National Machinery Safety Standardization Technical Committee), and the competent department is the National Standardization Management Committee.
GB/T 39078.2-2022
Escalator and Automatic sidewalk Safety requirements Part 2: Safety parameters that meet basic safety requirements
National Standard "Eastline and Automatic sidewalk Safety Requirements Part 2: Safety parameters that meet basic safety requirements" is under the jurisdiction of TC196 (National Elevator Standardization Technical Committee), and the competent department is the National Standardization Management Committee.
GB/T 41315-2022
Safety cutoff valve for urban gas transmission and distribution system
National standard "Household Safety cutoff valve for urban gas transmission and distribution system " is under the jurisdiction of 333 ( Ministry of Housing and Urban-Rural Development ), and the competent department is the Ministry of Housing and Urban-Rural Development.
GB/Z 41296-2022
General technical requirements for information system for coal mine safety production and monitoring and emergency rescue
National standard "Overall technical requirements for information system for coal mine safety production and monitoring and emergency rescue" is under the jurisdiction of TC485 (National Communication Standardization Technical Committee), and the competent department is the Ministry of Industry and Information Technology (Communication).
GB/T 41295.2-2022
Functional Safety Application Guide Part 2: Design and Implementation of
National Standard "Proper Safety Application Guide Part 2: Design and Implementation" is organized by TC124 (National Industrial Process Measurement Control and Automation Standardization Technical Committee) and implemented by TC124SC10 (National Industrial Process Measurement Control and Automation Standardization Technical Committee System and Functional Safety Branch). The competent department is China Mechanical Industry Federation .
GB/T 41295.1-2022
Functional Safety Application Guide Part 1: Hazard Identification and Requirements Analysis
National Standard "Property Safety Application Guide Part 1: Hazard Identification and Requirements Analysis" is under the jurisdiction of TC124 (National Technical Committee on Industrial Process Measurement Control and Automation Standardization), and is implemented by TC124SC10 (National Technical Committee on Industrial Process Measurement Control and Automation Standardization System and Functional Safety Branch). The competent department is the China Mechanical Industry Federation.
GB/T 41295.3-2022
Functional Safety Application Guide Part 3: Test and Verification
National Standard "Proper Safety Application Guide Part 3: Test and Verification" is organized by TC124 (National Industrial Process Measurement Control and Automation Standardization Technical Committee) and implemented by TC124SC10 (National Industrial Process Measurement Control and Automation Standardization Technical Committee System and Functional Safety Branch). The competent department is the China Mechanical Industry Federation.
GB/T 41257-2022
Digital workshop functional safety requirements
National standard "Digital workshop functional safety requirements" is organized by TC124 (National Industrial Process Measurement Control and Automation Standardization Technical Committee), and implemented by TC124SC10 (National Industrial Process Measurement Control and Automation Standardization Technical Committee System and Functional Safety Branch). The competent department is the China Mechanical Industry Federation.
GB/T 41295.4-2022
Functional Safety Application Guide Part 4: Management and Maintenance
National Standard "Property Safety Application Guide Part 4: Management and Maintenance" is organized by TC124 (National Industrial Process Measurement Control and Automation Standardization Technical Committee), and is implemented by TC124SC10 (National Industrial Process Measurement Control and Automation Standardization Technical Committee System and Functional Safety Branch). The competent department is the China Mechanical Industry Federation.
GB/T 41254-2022
Functional safety assessment method of explosion protection system
National standard "Functional safety assessment method of explosion protection system" is organized by TC124 (National Industrial Process Measurement Control and Automation Standardization Technical Committee) and implemented by TC124SC10 (National Industrial Process Measurement Control and Automation Standardization Technical Committee System and Functional Safety Branch). The competent department is the China Mechanical Industry Federation.
GB/T 41253-2022
Automatic evaluation specification for process industry safety monitoring system
National standard "Process Industry Safety Monitoring System Validity Assessment Specifications" is organized by TC124 (National Industrial Process Measurement Control and Automation Standardization Technical Committee), and is implemented by TC124SC10 (National Industrial Process Measurement Control and Automation Standardization Technical Committee System and Functional Safety Branch). The competent department is the China Mechanical Industry Federation.
Local standard
Jiangsu
DB32/T 4341-2022
Underwater road tunnel fire protection system engineering construction quality acceptance specification
Local standard "Underwater road tunnel fire protection system engineering construction quality acceptance specification" is reported by Jiangsu Provincial Department of Transportation , and the competent department is Jiangsu Provincial Market Supervision Administration .
DB32/T 4337-2022
Safety acceptance specifications for combustible dust dust removal system
Local standard "Safety acceptance specifications for combustible dust removal system" is reported by the Jiangsu Provincial Department of Emergency Management, and the competent department is the Jiangsu Provincial Market Supervision and Administration Bureau.
Beijing
DB11/T 2001-2022
Construction site emergency plan preparation procedures
Local standard "Construction site emergency plan preparation procedures" is reported by Beijing Municipal Housing and Urban-Rural Development Commission , and the competent department is Beijing Municipal Market Supervision Administration .
DB11/T 2000-2022
Construction project fire protection construction quality acceptance specification
Local standard "Construction Project Fire Protection Construction Quality Acceptance Specifications" is reported by the Beijing Municipal Housing and Urban-Rural Development Commission, and the competent department is the Beijing Municipal Market Supervision Administration.
Zhengzhou
DB4101/T 27-2022
Security management system preparation specifications for special equipment user units
Local standard "Speciality management system preparation specifications for special equipment user units", the competent department is Zhengzhou Market Supervision and Administration Bureau.
The new policies that will be implemented soon will affect your life!
Apply for the first time to "cross-provincial handling" of resident ID cards, and more provinces and cities have begun pilot projects!
According to the 2022 key measures formulated and issued by the Ministry of Public Security to serve economic and social development and help stabilize the economy, starting from August 1, 2022, the first application for resident ID cards in the region will be fully launched in 9 provinces and cities in the three areas of the Yangtze River Delta, Fujian, Jiangxi, Sichuan, Chongqing and Guizhou. html Starting from October 1, pilot work will be gradually launched in other provinces and cities across the country. By the end of the year, the first time people apply for in the pilot area will be achieved without returning to their registered residence , and can be processed nearby at their current residence.
Non-operating passenger cars and motorcycle inspection cycles are relaxed!
The Ministry of Public Security, the State Administration for Market Regulation, the Ministry of Ecology and Environment, and the Ministry of Transport jointly issued the " Opinions on Deepening the Reform of the Motor Vehicle Inspection System and Optimizing Vehicle Inspection Services ". From October 1, 2022, further optimize and adjust the inspection cycles of non-operating small and micro passenger cars (9 seats including less than 9 seats, except for vans). for non-operating small and micro passenger car , the original inspections were adjusted 3 times in 10 years to 2 times in (6th and 10th years), and the original inspections were adjusted once every six months after 15 years to once a year. for motorcycle , the original inspection of was adjusted to 2 inspections of (year 6 and year 10), and once a year after 10 years. After this adjustment, non-operating passenger cars and motorcycles only need to go online to the inspection agency for inspection in the 6th and 10th year within 10 years, and apply for inspection and pass marks every two years during this period.
E-cigarette products that do not contain nicotine are not allowed to be sold on the market!
On April 8, 2022, the State Administration for Market Regulation (Standards Committee) issued the mandatory national standard of GB 41700-2022 "E-cigarettes", which will be officially implemented on October 1, 2022. The national standard of "Electronic Cigarettes" stipulates that e-cigarettes are "electronic transmission systems used to generate aerosol for human smoking, etc.", and electronic cigarettes without nicotine are included in the e-cigarette definition range . Given that the flavored e-cigarettes such as fruits, foods, beverages and nicotine-free e-cigarettes are highly attractive to minors and are prone to induce minors to smoke, the standard clearly stipulates that should not make the characteristic flavor of the product show other flavors except tobacco , and clearly requires that "atomizers should contain nicotine", that is, electronic cigarette products without nicotine are not allowed to enter the market for sale. The standard is based on the principle of using additives. clearly lists 101 additives that are allowed to be used and is included in the "white list" of additives.
Automobile sales companies can issue invoices in reverse when purchasing used cars from natural persons!
The Ministry of Commerce, the National Development and Reform Commission, the Ministry of Industry and Information Technology and other 17 departments jointly issued the "Notice on Several Measures to Revitalize Automobile Distribution and Expand Automobile Consumption", requiring the acceleration of the activation of the used car market, cancels unreasonable restrictions on the development of used car sales , and makes it clear that enterprises whose registered residence and business premises are registered and whose business locations are outside the used car trading market can carry out used car sales business. For enterprises engaged in new car sales and used car sales, the business scope shall be uniformly registered as "auto sales" and the registration shall be made in accordance with relevant regulations. Starting from October 1, 2022, for registered car sales companies that purchase used cars from natural persons, allows companies to reversely issue a unified second-hand car sales invoice and use this to handle the transfer registration procedures . To promote the commercial circulation of used cars, starting from October 1, 2022, when registered automobile sales companies apply for small non-operating used cars transfer registration, the public security organs will implement separate signing management and issue temporary license plates . For cities with limited purchases of automobiles, it is clear that the used cars purchased and used for sale by automobile sales companies will not occupy license plate indicators.
New version of road traffic signs and markings was issued, adding 18 new traffic signs!
The State Administration for Market Regulation (National Standardization Management Committee) approved the issuance of the mandatory national standard "Road Traffic Signs and Markings Part 2: Road Traffic Signs" (GB 5768.2-2022), which revised the 2009 version of the mandatory national standard for road traffic signs and will be implemented from October 1, 2022. In response to the new facilities and new traffic management needs that have emerged in recent years, has added 18 new traffic signs, including " electric vehicle charging station", "electric bicycle lane sign", and "electric bicycle entry sign prohibited"; adapting to the requirements of drivers for travel convenience in complex road networks and traffic operation environments, has refined the layout, settings and use requirements of the signs, and put forward detailed requirements for the amount of information, information selection principles and methods of the direction signs; strengthening operability, has added traffic sign settings examples and other appendix to give a production legend.
If an animal diagnosis and treatment institution does not meet the corresponding conditions, the name "animal clinic" or "animal hospital" shall not be used!
Ministry of Agriculture and Rural Affairs announced the revised " Management Measures for Animal Diagnosis and Treatment Institutions ", which will come into effect on October 1, 2022. The "Management Measures" stipulate that animal diagnosis and treatment includes animal health examination, sampling, autopsy, dispensing, medication, medication administration, acupuncture, surgery, filling out diagnostic documents and issuing relevant certificates for animal diagnosis and treatment, and further clearly defines the scope of animal diagnosis and treatment activities. sets licensing conditions for three types of animal diagnosis and treatment institutions, namely animal clinics, animal hospitals and other institutions that provide animal diagnosis and treatment services. If an animal diagnosis and treatment institution does not meet the corresponding conditions, it shall not use the name "animal clinic" or "animal hospital" . It is clearly established and improved the information management system of animal diagnosis and treatment institutions, implemented online license processing, and optimized service processes; according to the characteristics of the industry's development, relevant regulations on Internet diagnosis and treatment activities, student internships and practical teaching activities have been added.
new version of the National Cosmetics Adverse Reaction Monitoring System is online!
National Medical Administration organized the upgrade and improvement of the national cosmetics adverse reaction monitoring system. The new version of the system will be launched from October 1, 2022. Starting from October 1, 2022, after cosmetic registrants, filing persons, entrusted manufacturers, cosmetic operators, and medical institutions discover or learn about adverse cosmetic reactions, they shall report through the National Cosmetics Adverse Reaction Monitoring System. Cosmetic operators and medical institutions that do not meet the conditions for online reporting shall report to the city and county-level cosmetic adverse reaction monitoring agency through paper reports, and they shall submit the report online on their behalf. Other units and individuals may report adverse cosmetic reactions to cosmetic registrants, filings, and domestic responsible persons, or report to the municipal and county-level cosmetic adverse reaction monitoring agency or the municipal and county-level department responsible for drug supervision and management, and the above-mentioned enterprises or units may submit the report online on their behalf.
Practical veterinary registration and Rural veterinary registration are both modified to register!
The Ministry of Agriculture and Rural Affairs announced the newly formulated "Regulations on the Management of Practical Veterinarians and Rural Veterinarians", which will come into effect on October 1, 2022. The "Management Measures" refines the requirements for practicing veterinary qualification examinations and practicing veterinary and rural veterinary filing. Adjust the registration conditions for practicing veterinary qualification examinations, and will include full-time college students and rural veterinarians who have been engaged in animal diagnosis and treatment activities for more than ten years in the application scope . Improve the registration requirements, and modify both the registration of practicing veterinary doctors and rural veterinary registration to filing, and stipulate that those who have worked in village-level animal epidemic prevention personnel for five years can be registered as rural veterinarians. allows multi-point practice , which stipulates that practicing veterinarians can register multiple animal diagnosis and treatment institutions, and rural veterinarians can practice in rural areas in the county where the filing authority is located.
, the two electronic certificates, , were respectively trial run in these places!
The Ministry of Housing and Urban-Rural Development issued the "Notice on the Trial Operation of Electronic Certificate of Safety License for Construction Enterprises and Special Operations Operation Qualification Certificate for Construction Construction Enterprises". From October 1, 2022, the trial operation of Electronic Certificate for Construction Construction Enterprises Safety License for Construction Enterprises Electronic Certificate for Construction Enterprises will be carried out in 9 provinces (autonomous regions and municipalities) including Tianjin, Shanxi, Heilongjiang, Jiangxi, Guangxi, Hainan, Sichuan, Chongqing, Tibet and the trial operation of Electronic Certificate for Construction Construction Special Operations Operation Qualification Certificate for Construction Enterprises in 8 provinces (cities) including Hebei, Jilin, Heilongjiang, Zhejiang, Jiangxi, Hunan, Guangdong, Chongqing, and Xinjiang Production and Construction Corps.
High standard farmland construction has new standards!
The State Administration for Market Regulation (Standards Committee) approved the issuance of the " High-Standard Farmland Construction General Rules " (GB/T30600-2022), which will be officially implemented from October 1, 2022. This standard was first revised since its release in 2014, making up for the inadequate setting of some indicators in actual applications of the original version. The highlight of the "General Rules" is to set construction standards in different regions. distinguishes different construction goals, key points, capabilities and conditions. It divides the country into seven regions: Northeast District, Huanghuaihai District, Middle and Lower River District, Southeast District, Southwest District, Northwest District and Qinghai-Tibet District. formulates high-standard farmland infrastructure construction standards and farmland land capacity standards reference values according to local conditions. The General Rules also stipulate the comprehensive grain production capacity indicators of each province. ensures that 1.2 billion mu of high-standard farmland will be built by 2030. In addition, the transformation and upgrading of the already built high-standard farmland can stably ensure more than 1.3 trillion jin of grain production capacity and maintain the bottom line of national food security.
Welcome to add it!
●Source: Comprehensive compilation Xinhua News Agency
●Editor: Meng Dexuan, Pang Shuyue
