(I) Horizontal and vertical
When we change water and electricity, decoration companies generally recommend that we lay and install water pipes and wire pipes horizontally and vertically.
horizontal and vertical laying and installing water and electricity pipes can be said to be the mainstream way for decoration companies to transform water and electricity. The reason why
is recommended to do this is as follows:
①, beautiful. is arranged horizontally and vertically, and the wire pipes are very neat and beautiful overall, and they are indeed quite beautiful.
②, easy to find. means that if the water pipe and wire pipe at home are broken, you can accurately determine the location of the water outlet pipe, which is convenient for later maintenance.
③, avoid construction damage. This is also a common saying they use, that is, when decorating later, it is not easy to be damaged and the quality is relatively guaranteed.
They just mentioned the advantages of installing water and electricity pipes horizontally and vertically, but they only talked about the defects in them.
The water level is vertical, which will inevitably cause the following problems:
①, the renovation cost has increased significantly. can be said to be horizontal and vertical, which is a lot more money than two points and one line, because the number of wire pipes and wires has increased significantly.
②, difficulty in repair. , for example, wires, if we want to change wires later, you will find that the wires cannot be pulled out at all. The horizontal and vertical arrangement of circuits is actually not recommended.
Practice suggestions:
Here I personally recommend everyone, if we have a water and electricity transformation at home, try to arrange the wire pipes at two points and one line. Save money and easy to repair. It’s just that we need to keep the positioning size or image.
(II) Pipelines go through the sky and don’t go through the ground
In the water and electricity renovation, another thing the decoration company will strongly recommend that we do is to go through the sky and don’t go through the ground.
At the beginning, the pipeline was mainly aimed at the water pipes in the bathroom. But later, I gradually didn't know how it turned into a wire pipe, and I didn't know how it was.
The reasons given by the decoration company are generally as follows:
①. If the water pipe is leaking, it will only leak into our own homes and will not cause losses to the downstairs. This is true of .
②. Water pipes are arranged in the sky. If there is leakage, the leakage location is very easy to find. You can repair it by disassembling the ceiling.
③, wire pipes can reduce the cost of laying indoor floor cement mortar . Reduce the floor height occupancy.
and other things sound very reasonable, but they are actually unreasonable.
Because the water pipe wires are arranged in the sky, there are generally the following problems:
①. As long as the water pipe is installed according to the requirements, there will be no leakage. So, it is simply an excuse to find and repair leaks.
②. When the water pipe is on the top, it will inevitably increase the elbow, which will cause the water pressure in our room to decrease. , especially those who live on the fifth and sixth floors of the villa, have a particularly serious impact.
③, the cost increase is very obvious. can be said that the installation of a bathroom water pipe will increase the cost by nearly twice as much as the layout.
Method guide:
In fact, for the water pipes in the bathroom, we arrange them along the ground, as long as we install and suppress them according to the requirements and provide protection. wire tubes should be arranged along the ground, not along the roof, as there is no benefit.
(III) Grooving on the ground
During the water and electricity renovation, the decoration company recommended that we rooving on the ground.
Grooving on the ground means cutting out the grooves using cutting tools on the ground, and then putting the pipelines into the grooves.
The reason why home improvement companies suggest this is generally given three reasons:
①, reduce the occupation of layer height.After clearing the groove, put the pipeline into the groove so that the pipeline will no longer occupy the indoor floor and will not reduce the floor height.
②, plays a good protection for pipelines. The reason given by is to place all the pipelines in the grooves, so that we can avoid damage to these pipelines when we decorate later.
③. Reduce damage to pipelines during construction. After the transformation of hydropower, other constructions generally need to be carried out. If the pipeline is placed directly on the ground, it is easy to be destroyed, such as crushed, etc.
These suggestions do sound very reliable and reasonable. But many are not practical and often just spend more money.
①. Opening trenches will significantly increase the cost of water and electricity transformation. grooves are charged separately according to hrs. Just this item, it is still easy to spend one or two thousand yuan more.
②. Grooving on the ground may also damage the structure of the floor. If our floor slab itself is a structural floor slab, the groove may cut into the steel bars and destroy the floor slab.
③. Unless there are special requirements, opening grooves cannot reduce the use of space. indoor floor tiles, the 3cm bonding layer can completely cover the pipeline, and whether the groove is opened or not will have no effect.
Recommended guide:
①. If the indoor floor is tiled, it is recommended that you install water and electricity pipes directly on the floor, and there is no need to trow them at all. saves money and is durable.
②. If we install wooden floors indoors, it is recommended that you can slot them separately in this room. does not need to re-level the ground and reduce space consumption.
(IV) Full circuit modification
In the water and electricity transformation, another method that will be recommended by the decoration company is full circuit modification.
The so-called complete modification of the circuit is to replace all electric stoves from the indoor distribution box , all the indoor rooms. The entire circuit of
was completely modified, and the original embedded wire pipes, sockets, bottom boxes, and indoor boxes were discarded. The reason why
has completely changed the circuit is that home decoration companies have the following three reasons:
①, more reliable quality. says that if the circuit is completely modified, there is no connector in the middle, it will be more secure and have a longer service life.
②. The original circuit may have quality problems. , so you need to replace all wires and wire pipes to ensure quality.
③. The old circuits at home have too long service life and many of them are aging, so it is recommended to change them all.
. Some of these suggestions are actually reasonable, but many of them will not be unreasonable.
For full circuit modification, everyone has long considered the following issues:
①. For new house decoration, if you recommend full circuit modification, it will completely cost you more money. Because the circuit of the new house can be used completely, there is no need to replace it all.
②. For all circuits, all wire tubes are discarded, it is actually not necessary. Because wire pipes are used for threading, as long as they can meet threading, they can continue to use them.
③. Everyone should be more cautious when replacing indoor distribution boxes. Because many of the original distribution boxes of are pretty good, after modifying them, I found that the quality of the distribution boxes used was worse.
Recommended guide:
①, new house decoration, it is recommended that everyone adopt breakpoint renovation, not all renovations. can spend a lot of money because it fully meets the breakpoint transformation.
②. For renovation and renovation of second-hand houses, it is actually recommended that you use the original circuit to renovate and replace all the original wires as much as possible.
(V) Hot water large circulation
When changing waterways at home, the home decoration company will recommend hot water large circulation to us.
The so-called hot water circulation refers to the hot water in our home. It can be circulated in the kitchen and bathroom to ensure that each water point can be opened and there is hot water.
The original intention of the hot water circulation is very good, so the decoration company also highly recommends it.
①, use as soon as you open. This avoids waiting when using hot water, and also avoids the waste of cold water. This is indeed very advantageous from the perspective of energy saving.
②, save money. does not require a water heater to be installed in every room, but only one water heater is used, and then the hot water cycle can be used, which can save costs.
However, most friends who have installed it will complain about the hot water cycle. Why do you say so? Generally, the following problems occur:
①, the electricity bill has increased significantly. Because hot water is circulating, the circulation pump needs to continue working to ensure that the hot water continues to circulate in the hot water pipe. This way, it can keep the power on and on, but the power is significantly increased.
②, can realize instant opening and instant heat. Although realizes the circulation of hot water, sometimes we forget to turn on the circulation pump. You will find that it takes a long time to release hot water.
③, the cost of waterway renovation will increase exponentially. hot water circulation is almost exponentially increased compared with the cost of ordinary waterway renovation. For example, ordinary waterway renovation may cost three to four thousand yuan, but if hot water is circulated, it will cost six to seven thousand yuan.
Recommended guide:
①. For most families, there is no need to install a hot water cycle. Because too much waste is spent during the hot water circulation. Most of my time wasted electricity bills.
②. If you want to achieve instant heat, you can actually shorten the pipeline of hot water in each place as much as possible. this way, basically hot water will be released when it is turned on.
was written at the end of the article
water and electricity transformation, which can be said to be the highlight in home decoration, and it is also something that many friends are particularly concerned about.
Water and electricity renovation. If you follow the advice of the decoration company, you will find that the cost is indeed very high. Therefore, we must learn to distinguish some recommendations from decoration companies. This is the only way to achieve cost-effective home improvement and water and electricity.
[Original pictures and texts, pictures are from the Internet, please delete if you contact infringement]
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-