As a place where the bathroom consumes a lot of water, it is being tested every day. If the bathroom is not properly decorated, it is easy to leak during the later use. The bathroom decoration is generally covered with ceramic tiles. If there is a leak in the later stage, it will be a lot of troublesome to remediate it. If there is a leak in the bathroom in our home, how should we repair it? Let me understand what causes the bathroom leak? How to deal with and repair it? Of course, different reasons for leakage need to be chosen to solve it. Let's learn about the reasons for the bathroom leak.
(A mini program has been added here, please go to the Toutiao client to view)
After the decoration is completed, the bathroom should first check whether it is a surface leakage and water can leak out. It is very likely that the waterproof layer is not done well, and it may be damaged during decoration, or because the waterproof layer has been damaged for too long, you can use the following two situations to detect whether it is a surface leakage problem. After taking a bath or mopping the floor, you should observe whether there is a leakage problem on the surface downstairs. If so, it means that there is leakage in the bathroom. Another type is moldy in the corner of the bathroom, which is also a surface leakage.
treats surface leakage, and there are also pipe leakage after the bathroom is renovated. There are many points of leakage in the pipeline, which can be roughly divided into the following types:
1. The water pipes in the bathroom leak, and the water leakage will be leaked after opening the faucet. After closing the faucet, the water leakage will be reduced immediately.
2. The bathroom pipe leaks. Without water, the pointer of the water meter is still rotating.
3 and drainage pipes are leaking. Because they are underground pipes, they are relatively hidden, so they are not easy to find.
(A mini program has been added here, please go to the Toutiao client to view)
1. If the above reasons occur in our home, we can choose the following solution to solve it. If the waterproof layer leaks relatively small, you can first choose to use brick-free waterproofing and make up for leaks. Inject waterproof material (two-component epoxy resin glue ) into the leaking waterproof layer, which can effectively solve the problem of waterproof leakage, and can be put into use after construction is completed, with a warranty period of more than 5-10 years.
2. If the waterproof layer is seriously leaked due to disrepair, then you need to chisel all the tiles, remade the waterproof layer, clean the base layer, organize it smoothly, apply the waterproof layer twice, and the thickness of the waterproof layer shall not exceed 2MM, and then apply a layer of cement mortar to the waterproof layer.
(A mini program has been added here, please go to the Toutiao client to view)
3. If the water pipe seepage is relatively large and continuous, and there is still water seepage without water, it means that the water pipe seepage is water seepage. We can no longer use the water seepage pipe and change the water pipe to an open pipe. If it is a sewage pipe, because it is a concealed pipe, it is necessary to smash bricks to solve the problem. Find out the specific location of the seepage, replace the seepage pipe, and restore the ground.
If the leak is serious and cannot be solved by yourself, it is recommended to find relevant personnel to repair it. There are many ways to deal with water leakage in the bathroom, and different water leakage problems need to be solved and dealt with in a targeted manner.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-