The kitchen is definitely the most easily overturned place in the home decoration, there is no one.
The place is small, but there are a lot of crafts and things involved. Water, electricity, masons, carpenters have to come again, and all kinds of home appliances, large and small, must be put in, and then consider storage, cleaning, etc. Such a daily problem, if you are not careful, you will come to the door when you "turn over."
In the kitchen, the cabinets are the main thing, but Ayong has also suffered a lot from buying cabinets. " ( click to view) , but there are still small partners who overturned on the details.
Not long ago, the installer @张敬燕 on the 19th floor of the Academy had a problem: workers came to install the side range hood, but there was a 2cm gap between the installation and before the cabinet. This gap not only affects the beauty, but also tends to accumulate oil and dust in the later stage. The key problem is that she is sure that the cabinet owner does not know that there is a gap, and has not given relevant reminders in advance.
2cm is it necessary? .
span
@张敬燕 can join the group discussion on the 19th floor of the academy . After the question,The big guys have three reactions:
The first one, I didn’t pay attention at all, but there is such a thing?
The second type, "I also have gaps in my house. Is this necessary?"
The third type, please go home and see if there are gaps at home.
So, is this 2cm gap necessary?
Ayong consulted Mr. Xiao He, a woodwork expert in the 19th floor of the Academy of Decoration, , and his answer was: you must stay. The range hood is hooked to the link on the wall after the cabinet is installed, so there needs to be a gap between the cabinet body and the hood, otherwise it cannot be hooked up. The gap is generally at least 2cm. Moreover, if you want to remove the range hood later, you have to lift it up and then take it down. also needs a gap of 2cm here, otherwise it won't be removed for maintenance in the future.
Is there any way to optimize or beautify it?
However,Although the gap must be left, if you encounter an OCD owner, there is no way to beautify it. The key issue is whether the cabinet maker is professional and dedicated. communicates the 2cm gap with the owner clearly in advance.
In the early stage of the installation, usually buy the range hood first, the size and type of span1, the span1, the size of the cabinet and the span3 span3 after installation. , And then integrate various parameters to design cabinets, as well as wiring and piping.
At this time, the following beautification schemes can be considered together:
_strongspan_strongspan_strong64
The most common way to do this is to keep the gap as usual, but when making the cabinet door, make the cabinet door above the range hood a little larger so that the hanging place under the cabinet door can be just right By blocking the gap, you can achieve a "tight fit" effect when viewed from the outside.
#Only the cabinet door above the range hood,Cover the fuselage without leaving any seams
If the kitchen storage cabinet is not enough for the upper side of the hood, if the kitchen storage space is not sufficient The door, the door of the wall cabinet covers the body of the range hood, so that the range hood and the wall cabinet are on the same horizontal line, and there is no problem of leaving no seams. It should be noted that the length of the space is slightly wider than the outside of the range hood body.
#If you don’t make a wall cabinet, the range hood looks great outside
The design is generous and beautiful. Friends can also consider not making a wall cabinet above the range hood, and making cabinets on both sides separately, which saves materials and does not affect the appearance.
If it is discovered afterwards that there are gaps in the cabinet, has one last resort. You can customize the decorative baffle of the same color as the cabinet door and install it in the gap between the range hood and the wall cabinet. Remember to use glass glue to fill in the gaps to prevent oil and dust accumulation during use.
cupboard where there are eight easy to roll
Speaking of cabinets overturned ,A Yong also sorted out the car rollover cases shared by netizens in the 19th Floor Decoration Academy and the 19th Floor APP Decoration Forum, and concluded that these eight cabinets are always prone to problems. The cabinets at home have been completed, you can also check to see if there are any flaws. After all, will have the opportunity to check the leaks before moving in.
1, the cabinet design pattern unreasonable School
△ 19 floor loaded with Friends @ fly home cabinet
The corner design of the cabinet has always been a problematic place. On the 19th floor, the college outfit friend @飞, his cabinet has a big hole in the design. Even though he is 1.8 meters tall, he can't reach the inside of the first floor. The cabinet on the second floor simply has to be on his stomach to put things in. Therefore, after the cabinet is designed, must repeatedly simulate the use scenario, and will determine the drawings. Most of the time, the business is not so concerned about the design of your home.
2. The height of the table is combined with the height of the user
÷ 5 cmIn addition, the unequal height design of the countertop can be considered, and the countertop in the food preparation area can be appropriately higher, so that you don't have to bend down when cutting vegetables.
The cooking area can be lowered appropriately, so that you don’t need to put your arms 8-10cm apart when you cook.
3. It is recommended to install the water retaining strip on the position of the countertop against the wall
4. Commonly used sockets are best equipped with a switch
. The second is that you don’t need to plug in and unplug the in the kitchen often. There are always water operations in , so you are not afraid of safety issues if you plug into the socket with wet hands.
In the later stage of sanitation, there will be headaches. It is dust and oil fume, and it is not in a place that can be cleaned easily. Therefore, it is very important for the cabinet to be top.
6. The flue is recommended to install check valve
5span
5
, When the neighbor’s cooking meal, the kitchen is full of oil fume.
7. The built-in trash can is really tasteless in the summer. You will know what kind of suffering it is to open it. If the cabinets are not so tightly fitted, there will be a smell in other cabinets.
8. Do not use a single light source for lightingIt is recommended to use a light-sensitive light, or you can use a common light for cooking at night, so that the countertop of will not be invisible due to the backlight.
the kitchen of various sizes in advance collections
In addition, the composition of the cabinet usually There are three types: floor cabinets, countertops and wall cabinets. Each part has certain size requirements. Take this opportunity to help everyone understand.
1. 1, the size of the floor cabinet and the size of the main cabinet 5br3span strong 5br3span
_span0sp
The depth of embedded electrical appliances is mostly 450mm or more, except that the electrical appliances must be perfectly hidden.Also reserve a certain heat dissipation position. We draw 600mm on the drawing, and the actual cabinet is 550~580mm.
Regardless of appliances or kitchen sinks, 350~450mm can be considered for cabinet countertops.
b, base cabinet height=adjusting feet + cabinet body + countertop
of Chinese people The default is 800mm. The height of the common adjusting feet (the position of the skirting line) is 100mm, the height of the cabinet is 650mm (slightly higher is 715mm), and the height of the table is 50mm.
The height of the cabinet depends on the height of the user. The gold height = the height of the user ÷ 2+50mm.
c, high and low countertops
with a certain height, and a cooker span1 spanIf the countertop of the vegetable washing area and the countertop of the cooking area are at the same height, there will be situations where it is necessary to bend over to wash the vegetables and start cooking.
So the high and low platforms came into being. Usually the difference between the two is about 100~150mm. If the height of the table is 800mm, the vegetable washing area can be slightly raised to 900mm.
It is more reasonable to set 3 heights: For example, the normal height of the countertop is 800mm, the vegetable washing area is 850mm, and the cooking area is 750mm, but it is not often used in practice, mainly due to the lack of space. , The incoherence of the countertop affects the use.
2. If the chopping board is placed with the chopping board span1, the chopping board must be placed on the span1, ppan0 _span5 _span0 p If the reservation is too small, it may not be used. The recommended reference sizes are as follows: drain area ≥ 300mm, meal preparation area ≥ 600 mm, and pan area ≥ 300 mm. If this condition is met, the kitchen will be easy to use. Of course, the wider the countertop, the use The better the experience.
where the cabinet on the side close to the wall is connected to the wall,A water retaining strip is usually made to facilitate sanitation, and the height is generally 50mm.
If the height of the window sill exceeds the height of the table, it is recommended that the height of the window sill be customized with the height of 50~100mm.
3, hanging cabinet relative dimensions
a, the depth (thickness)
The wall cabinet is too thick, and it will bump into the head when cutting vegetables. The daily size is usually 320~350mm.
b, height below the height of the kitchen
installation of wall cabinets can easily get to reach out to people standard,Usually 700mm high from the operating table. The height of the cabinet is 700~900mm, depending on the height of the kitchen ceiling. Conditionally, it is recommended to seal the top cabinet (that is, the top cabinet is not standard), and the space above does not hide dust.
4, a sink and faucet relative dimensions
kitchen space if not, washing There are no strict requirements for tableware, fruit, vegetable and meat partitions, and the menu sink is sufficient. The length of the common small single tank is about 600mm, which can be put into the pot, and the large single and double tank can reach about 780mm.
Nowadays, many families’ kitchens choose double sinks, which are usually used to wash the pots and bowls with a total length of 760mm to 900mm. The depth of the sink is 190-210 mm, which can solve the problem of splashing.
5. Related installation dimensions of the smoke machine
span1 span1 and side suction side smokersIt is necessary to reserve a certain amount of space when installing the hood. On the basis of the product size, it is recommended to reserve an additional 30mm.
a. The distance between the top hood and the countertop should be 650~700 mm, which can not meet the head, but also can ensure the effect of oil smoke.
b. side suction range hood is not designed to be lower than the overhead smoker. The problem, 300~400mm away from the operating surface of the stove, can ensure strong suction and good smoke effect, without touching your head or bending over.
, even if the brand is sold, it’s still a big problem after the cabinet is sold.
.-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-