Hello everyone, my name is 0631, follow me, you will surely gain something, let us raise grass easily, raise fish simply, share happy, small things are not trivial, just be serious.
Today, let’s talk about the usage of the final water grass mud in the aquatic plant tank, because it happened that some netizens asked this question, and there were problems in the actual operation, then we will say here by the way, the most important usage of water grass mud is At least have a basic understanding, so as not to blindly operate and finally figure out where the problem is.
Water grass mud is the most used bed by all water grass lovers, because everyone can think of using mud for planting grass, so this does not need to be explained too much, the benefits of water grass mud are also many, rich in nutrients, most of them are Softening water quality is beneficial to the growth of aquatic plants, and there are also special versions. Because the water quality is different in different parts of the country, you can choose according to the situation, but in general, the softening water quality is the main method. The effect of cultivating bacteria is very good, and it has its own water purification function. It's just that the water grass mud will show a downward process during use, that is, it will become more and more barren with time, 3-5 years or the quality is not good, it may be pulverized in a shorter time, and it must be renewed. Come again.
The above is simply to tell you about it, but there is too much introduction. Today, I mainly talk about how to use water grass mud in the tank.
First, from the general direction, it can be divided into, (first landscaping and then laying mud), (first laying mud and then landscaping). Basically, there are these two major directions. It depends on the selection of materials in our own landscaping. According to different visual effects of the landscape, we can place the materials on the mud, or use the mud to place the materials. small vision.
Second, before the water weed mud is put into the tank, of course we hope that everyone chooses the water grass mud produced by the regular manufacturers, such purpose is to ensure your water grass, and you have a service life, and reduce the occurrence of problems when opening the tank , such as prolonged turbidity.
Third, one thing that many new netizens will do before the water grass mud is put into the tank is to wash it. The vision of the water grass mud to most people is that it is similar to sand one by one, and other things are put into the tank It can be washed, so this water grass mud needs to be washed before you can feel relieved. This is a problem that many newcomers make. The idea of being assimilated by the same substance is a big mistake.
Fourth, the water and grass mud must not be washed. The more you wash, the more you will collapse. You can't expect to be able to wash it before putting it into the tank. If you see a newcomer here, pay attention and correct it in time. Use a sieve to sieve the water grass mud, and sieve out the small powder inside.
Fifth, if the water and grass mud is rinsed before you put it into the tank, it will be very inconvenient when you put it back into the tank for landscaping. The mud is easy to stick when it sees water. We need to adjust the position at any time for landscaping, and It also needs different amounts of water grass mud to fill, so your water grass mud will be soaked before it goes into the tank, and when you use it again, your head will be big, which is very difficult to use.
Sixth, so the water grass mud must not be washed before it is put into the tank. The dry water grass mud is the correct way for us to put it into the tank for landscaping and play the role of the water grass mud, and it must not be washed.
Seventh, after we lay the water grass mud and complete the landscaping, we can spray water on the surface of the water grass mud to moisten the water grass mud, let the water grass mud stick well, and then correct it by the way because of the water absorption change of the water grass mud. The material is skewed, etc.
The eighth, after that, it is the main one. It is easier to plant water plants with wet water grass mud. At this time, water grass can be planted in sequence. The warm water grass mud will have airtightness and adhesion. The aquatic plants are very easy and stable, and everyone has more confidence in grasping them.
Ninth, after all the work is completed, it is time to add water. The process of adding water must be light. You can lay a layer of plastic paper on the surface of the water, grass and mud, or a hard floor, or you can directly use the shower head to add water, so that The purpose is to let the water enter the tank more slowly, reduce the impact, avoid the water mixing, and the trouble that the water plants may rush out.
The tenth, after adding the water, because it is water grass mud, there will be some muddy water. Because of the characteristics of mud, there is no way. The acrobatics are cleaned up together, and then the water is injected twice, so that the degree of water turbidity will be minimized, and the rest will be handled by filtration.
The above is a complete usage process. I did this. As for how you want to use it, you can practice it yourself. There may be many methods, as long as you can achieve your own satisfaction. For the purpose, if you have good suggestions and practices, you can leave a comment.
Hello everyone, my name is 0631, follow me, you will surely gain something, let us raise grass easily, raise fish simply, share happily, and do things actively in order to give ourselves a better position.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-