Tiger skin orchid, with tall leaves and some starry lines on it, which is very ornamental and has a certain shade tolerance. It is suitable for maintenance in living rooms and other locations;
However, some flower lovers also reported a problem, that is, Tiger skin orchid has not grown "new leaves". It turns out that "mao trick" is here, and it can be solved by slitting the soil. Tiger skin orchid, with tall leaves and some starry lines on it, which is very ornamental and has a certain shade tolerance. It is suitable for maintenance in living rooms and other locations; However, some flower lovers also reported a problem, that is, Tiger skin orchid has not grown "new leaves". It turns out that "mao trick" is here, and it can be solved by slitting the soil. There are many varieties of flowers and plants, and the growth rate is also different. The tiger skin is actually not that fast because its leaves are relatively tall. is generally in spring and autumn. If the soil is breathable and has sufficient nutrients, it can grow 3 to 4 puppies before it grows into a molded leaf ; Therefore, the growth rate of the tiger skin is relatively slow, so there is no need to worry. However, after one or two years of maintenance, it still has no baby and the trend of sprouting is the soil. The probability is that the soil is If there is a problem, how to determine whether there is a problem in the soil, you can confirm it through these three signals; The leaves of the tiger pill can store a lot of water, so the watering frequency does not need to be too high. How to judge whether the tiger pill is lacking in water? Just weigh the weight of the flower pot, or see the shriveling condition of the tiger pill leaves. If the flower pot becomes lighter, or the leaves have wrinkled lines, you can water it; . After watering, it is best to pay attention to the speed of water transpiration in the soil in the pot. If the soil is still wet 2 or 3 days after watering, that is, the flower pot is still It is heavy, which proves that there is a problem in the soil. Therefore, after watering, the water cannot quickly evaporate, which affects the transportation of nutrients, and the growth status will naturally be affected; The second signal is easier to judge. Check whether the surface soil has signs of plate solidification or clumping. If this happens, it proves that there is a problem in the soil, and you must immediately peel it off; There are many reasons for soil solidification. The first reason for is that the soil has a long service life and . Once it exceeds 2 years, the probability of plate solidification is particularly high; has many reasons for soil solidification. The first reason for is that the soil has a long service life. . Once it exceeds 2 years, the probability of plate solidification is particularly high; The second reason is that the watering is wrong in normal times. Always water half of the water, and not completely watered, causing some soil to slowly solidify, and finally completely lock the root system, affecting normal growth; The third reason is that there is a problem with water quality . When watering, adding tea, drinks, etc. to the water will destroy the soil structure and affect the normal absorption of nutrients; Therefore, seeing the soil whitening and solidifying, no matter what state the tiger skin is in, it is recommended that the soil be flipped immediately. Although tiger skin relies on the nutrients stored in the root system and leaves, it can continue to maintain growth, but it will stagnate growth. Once later, it is Roots and yellow leaves take a lot of time to recover; The last situation is that the floating root system of the tiger skin orchid can be clearly seen. In fact, the root system runs out of the basin surface, which is two extreme manifestations. The first type is that the growth state of is too good. The original flower pot of can no longer accommodate the growth of 
Is the tiger skin growing fast?
signal 1: After watering, the soil is wet for a long time
signal 2: The surface soil is white, and local plate solidification
signal three: You can vaguely see the floating root system
The second type is that the growth environment of is somewhat worse , and the watering frequency is low, but there is a certain humidity around it. title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title title tit Maintain growth, the root system originally covered in the soil of the pot will also extend out of the basin surface to absorb water from the air. In any case, the soil of the tiger pill must be re-potted in time;
[Re-potting steps]
If the water of the tiger pill before, it is best to take out a small fan when changing the pot, artificially provide air to let the soil of the pot completely dry. If the soil in the pot is in a wet state, when re-potting, it is easy to pull some healthy roots when re-potting, which affects the speed of taking the pot later;
After the soil is completely dry, turn the pot backwards and the pot soil can naturally be separated, covering the root system of the tiger pill Clean all the roots. If there are dry or black parts, clean all these parts and cut them off directly. You also need to apply mutton on it, and place it in a cool place to dry ;
. When soil is added later, it must be loose and breathable. If you want the growth of the piranha, try to choose soil with sufficient nutrients, such as nutrient soil, leaf rot soil, etc., which has sufficient nutrients, which is more conducive to the piranha root system of the piranha root system to absorb nutrients; then add 2 to 30% of the piranha, such as river sand, vermiculite, etc.;
flower pots should be selected for small The number one is a circle smaller than the existing crown of the piranaceae. Add a layer of granular matrix to the bottom of the flower pot to avoid watering water accumulation on the bottom of the pot, affecting the plant growth. Then cover the configured soil with . It is recommended to expose the root system slightly, and then lay a layer of citrus on the basin surface to keep the root system breathing smoothly. In addition, in this area, it is easy to grow small ;
Summary: If the piranaceae in your home has not grown new leaves, it is recommended to observe the state of some pot soil. If there are any problems with the soil, change the pot and change the soil in time to ensure that the root system can breathe smoothly and absorb nutrients. It can be sunburned for 3-6 hours a day. If watering is timely, the growth will naturally be better.
(Original article, some pictures are from the Internet. Please contact us if you are infringing, follow us if you like, help forward it)
▼ At the end of the article, hold on to like it, and give me 3 consecutive
(Original article, some pictures are from the Internet. Please contact us if you are infringing, follow us if you like, help forward it)
▼ At the end of the article, hold on to like it, and give me 3 consecutive
