Keep the stainless steel compensator clean frequently to prevent the stainless steel compensator springs and other materials from being filled with oil dirt or being corroded, and to prevent the stainless steel compensator discharge pipe from being blocked by oil or other foreign

2025/07/0414:12:35 home 1983

Keep the stainless steel compensator clean frequently to prevent the stainless steel compensator springs and other materials from being filled with oil dirt or being corroded, and to prevent the stainless steel compensator discharge pipe from being blocked by oil stains or other foreign objects. Check whether the lead seal is intact frequently to prevent the heavy hammer of the lever-type stainless steel compensator from loosening or moving, and to prevent random twisting. If there is any sign of leakage in the stainless steel compensator, it should be replaced or repaired in time. It is prohibited to use methods such as increasing loads, excessively tightening of the adjustment screws of the stainless steel compensator, or adding heavy objects to the lever to leak. During the installation process of

Keep the stainless steel compensator clean frequently to prevent the stainless steel compensator springs and other materials from being filled with oil dirt or being corroded, and to prevent the stainless steel compensator discharge pipe from being blocked by oil or other foreign - DayDayNews

, carefully protect thin-walled parts such as compensator from damage caused by knocking, scratches, arcing , welding splash, etc. Do not remove the transport fixtures on the transport compensator until the installation is complete. Any displacement (compression, elongation, lateral displacement, angular displacement) that is not considered in advance and not included in the compensator during design should not be subject to the compensator. To adjust the pipeline system to cooperate with the compensator, the method of adjusting the compensator cannot be used to compensate for the installation deviation of the pipeline.

Keep the stainless steel compensator clean frequently to prevent the stainless steel compensator springs and other materials from being filled with oil dirt or being corroded, and to prevent the stainless steel compensator discharge pipe from being blocked by oil or other foreign - DayDayNews

To reduce friction on corrugated compensator , molybdenum disulfide (M0S2) or other lubricants can be added. Welding should have complete welding process regulations and be welded by certified qualified welders. The ring joints between corrugated pipe and parts such as end pipes and intermediate pipes are used to argon arc welding or plasma welding. When the thickness of the single layer of corrugated pipe is greater than 3mm, arc welding can be used. The welds should be flat and there should be no defects such as cracks, pores, slag inclusions on the surface.

Keep the stainless steel compensator clean frequently to prevent the stainless steel compensator springs and other materials from being filled with oil dirt or being corroded, and to prevent the stainless steel compensator discharge pipe from being blocked by oil or other foreign - DayDayNews

home Category Latest News